I think the main post should be updated with new discoveries for each model.I've downloaded it,but not yet installed because I knew this would happen from the moment I saw it in downloads section.Until almost all models I use aren't listed with correct coordinates,I don't think I'll be dropping it in my scripts folder.

For you EFLC users who cannot get it to work, and receive that error, here is the solution:

What I did:

For the Images.txt open the file here:

C:Program Files (x86)SteamsteamappscommonGrand Theft Auto IV Episodes from Liberty CityEFLCTBoGTcommondataImages.txt

Add the following at the very bottom.

]platformimg:/models/cdimages/spotlight 0

For the "SpotLight.net.dll & spotlight.ini" put those in the:

C:Program Files (x86)SteamsteamappscommonGrand Theft Auto IV Episodes from Liberty CityEFLCscripts

Lastly for the "spotlight.img" put that in:

C:Program Files (x86)SteamsteamappscommonGrand Theft Auto IV Episodes from Liberty CityEFLCTBoGTpcmodelscdimages

If neither of these work, Reply and tell me because I might know another way.

dhruv post your config request in my page and i will make them for u

I still have the same problem as before. Only polmav and police2 works, none of the others show up.

This is what my ini file looks like:

did u install v2 alot of times the light works in all cars u just have to look for it it may be hidden

Where's the v2 download link!!!????!

were the original download was

Anybody have any good spotlight settings for the 2007-2012 Chevrolet Tahoe/Suburban?

Edited July 5, 201213 yr by DerangedSomali

dhruv post your config request in my page and i will make them for u

Thanks, Mike. But what'd you possibly mean with "my page"?

i have a topic open with a bunch of car settings already and i am taking requests

@Michael

Yes I did, like I said I used the original settings and also the given settings (which has to be correct), and the lights just don't show up. Also I always make sure by opening all car doors, bonnet and the trunk, and also lift the car in the air, so I can see where the spotlight is, but it's just not there.

Can the control keys be changed? i tried changing them because i am playing GTA IV in my laptop. the light just can't seem to move.....

You should be able to change the keys in the ini.

Edited July 5, 201213 yr by Jorge

Can the control keys be changed? i tried changing them because i am playing GTA IV in my laptop. the light just can't seem to move.....

You can change the control keys in the configuration settings that you placed in the Scripts folder. It has a list of keys that you can set it to and the corresponding numbers that you need to enter in the configuration file.

Hera ya go Jorge, what you asked for:

I havent messed with it too much because im still trying to get the main police vehicle to work. Again, police, noose, police3 and police4 do not work at all (they are vics) police2 and fbi do work with no problems (they are impalas) I have played around with peoples settings they have sent in and still nothing. "Michael Carley" submitted the config to a specific vehicle, i am using that specific vehicle and still nothing. Not inside the car, nor on any surrounding buildings ect.

*******************************************************

[Keys]

// Default: Insert - 161

on-off=161

// Default: Numpad1 - 100

sp-left=100

// Default: Numpad3 - 102

sp-right=102

// Default: Numpad5 - 104

sp-up=104

// Default: Numpad2 - 98

sp-down=98

*******************************************************

**The following are the position of the spotlight in relation to the center

of the vehicle.**

Spot-x: Left(-) & right(+)

spot-y: Forward(+) & Backward(-)

spot-z: Higher(+) & Lower(-)

*******************************************************

[Police]

spot-x=-0.9

spot-y=+1.0

spot-z=0.5

*******************************************************

[Police2]

spot-x=-0.8

spot-y=+1.0

spot-z=+0.7

*******************************************************

*EFLC ONLY*

[Police3]

spot-x=-0.9

spot-y=+1.0

spot-z=+0.5

*******************************************************

*EFLC ONLY*

[Police4]

spot-x=-0.9

spot-y=+1.0

spot-z=+0.5

*******************************************************

*EFLC ONLY*

[PoliceB]

spot-x=0

spot-y=0

spot-z=0

*******************************************************

[FBI]

spot-x=0

spot-y=0

spot-z=0

*******************************************************

[PolPatriot]

spot-x=0

spot-y=0

spot-z=0

*******************************************************

[PSTOCKADE]

spot-x=0

spot-y=0

spot-z=+2.0

*******************************************************

[NSTOCKADE]

spot-x=0

spot-y=0

spot-z=+2.0

*******************************************************

[Noose]

spot-x=0

spot-y=0

spot-z=+2.0

*******************************************************

[Ambulance]

spot-x=0

spot-y=0

spot-z=0

*******************************************************

[Firetruck]

spot-x=0

spot-y=0

spot-z=0

*******************************************************

[polmaverick]

spot-x=-0.2

spot-y=+3.7

spot-z=-0.7

You should be able to change the keys in the ini.

You can change the control keys in the configuration settings that you placed in the Scripts folder. It has a list of keys that you can set it to and the corresponding numbers that you need to enter in the configuration file.

I changed them but the light still cant be moved.....

Edited July 5, 201213 yr by ASTTrprDillon95

I still can't get the Noose cruiser to work... any ideas?

i hate to be a dick but this was so easy to install and config the vehicles, every slot works fine for me install v 2 and figure it out its not hard at all.

EDIT woohoo post 100 lol

Edited July 6, 201213 yr by Michael Carley

I'll try it out. Before I just added the lines to V1.

Congrats on your 100th post.

Hi there, does anyone know why my spotlight doesnt move when i hit the keys, I have double checked everything and all my files are in correct spots, have changed keys as well. The spotlight is there but it doesnt move???? thanks

Hi there, does anyone know why my spotlight doesnt move when i hit the keys, I have double checked everything and all my files are in correct spots, have changed keys as well. The spotlight is there but it doesnt move???? thanks

What keys/integer number are you setting in the ini file?

Hey Jorge I'ma make a showcase vid for this k?