New skin created by @Krame86:

 

Edited April 11, 201610 yr by Captain14

So, I'm still not 100% settled on including the Liberty as an option. I'm not a massive fan of how it looks on the car. Today I made a new interior lightbar modeled somewhat loosely after the Whelen Inner Edge, I'm considering eliminating the Liberty and just leaving the Valor and the Inner Edge-style bar. Here are a few screenshots of the new interior lightbar, I'm still working out some bugs:

Any opinions?

Honestly, it all looks really good. In the end its your model. Do with it as you like and let the people make up their minds on whether or not they want to download it. However you could also just do as you were planning and have all the different lightbars on one model as different extras or have seperate models all together for each lightbar and light setup.

Not going to lie, I am going to download this no matter which way you go with this. It looks great and I can't really complain about any of the options you have suggested.

 

Cheers

Maybe an RX2700? Or a Legacy? 

I've been following this for a while now I got overjoyed with envy when you announced a version with the Liberty as I absolutely have the valor with a passion but to each their own. I'm sure it'll be great either way!

On April 12, 2016 at 1:43 AM, HankVoight said:

I've been following this for a while now I got overjoyed with envy when you announced a version with the Liberty as I absolutely have the valor with a passion but to each their own. I'm sure it'll be great either way!

I will work to keep another option then! I would like to get an RX2700 for it, just waiting to see if someone will give one to me. I still have to add siren glass to each light, but by and large the car is almost done. I created LOD 1 and got the glass to break so things are coming together nicely and I hope for a a release soon!

I saw those teaser photos of this Tahoe... I can has yet?

 

Looks fantastic. Rather excited for this one.

Cheers

 

Tahoe has been released!

 

Download has been updated, I have added an LED spotlight.

Looked but don't recall the siren and light settings values. Threw it in a add on slot and works good but for the life of me cannot recall the siren and light settings for the slot it's intended for. Tried a few but haven't hit the lucky numbers yet. Anyone kindly know the values? Other then that it works lovely in a regular slot and the add slot if I can figure out the siren light settings values.

6 minutes ago, Azteco said:

Looked but don't recall the siren and light settings values. Threw it in a add on slot and works good but for the life of me cannot recall the siren and light settings for the slot it's intended for. Tried a few but haven't hit the lucky numbers yet. Anyone kindly know the values? Other then that it works lovely in a regular slot and the add slot if I can figure out the siren light settings values.

sirensettings needs to be set to 1.

5 minutes ago, Captain14 said:

sirensettings needs to be set to 1.

Thanks I must have tried a different combo but I set them to 1 and 1 all work minus the rear window leds except for the outer 2. But everything works like a champ.

12 minutes ago, Azteco said:

Thanks I must have tried a different combo but I set them to 1 and 1 all work minus the rear window leds except for the outer 2. But everything works like a champ.

The rear lights were an issue with a version of the Tahoe that was only up temporarily. Download one of the latest versions and it will be fixed.

I'm thinking it's something in my metas but when used as a add on sometimes after colliding with a object or vehicle pretty hard the vehicle seems to duplicate itself without doors sometimes a couple or two copies of it that just hang out where the collusion occurs without tires and doors usually facing rear end up and can be drove through and walked through minus the front ram bar which you can collide with it and move the copies around. Only have had the problem with add on slot. The Tahoe itself your in is fine just wonder what cause my end would create bare clones at impact. Any thoughts from anyone? If needed I'll get a screen shot next time but only occurs once every great while. 

Just now, Azteco said:

I'm thinking it's something in my metas but when used as a add on sometimes after colliding with a object or vehicle pretty hard the vehicle seems to duplicate itself without doors sometimes a couple or two copies of it that just hang out where the collusion occurs without tires and doors usually facing rear end up and can be drove through and walked through minus the front ram bar which you can collide with it and move the copies around. Only have had the problem with add on slot. The Tahoe itself your in is fine just wonder what cause my end would create bare clones at impact. Any thoughts from anyone? If needed I'll get a screen shot next time but only occurs once every great while. 

im pretty sure its not the meta or anything but rather the model itself

You should fix up those mirrors, I see you've somehow assigned tyre textures to them. What happened to the Tahoe rims?

8 hours ago, OfficerFive0 said:

im pretty sure its not the meta or anything but rather the model itself

Correct, this is an issue that started with the spotlight update. I will look into fixing it tonight, it was simple oversight on my part

I just replace this mod to fbi2, but when i try to make traffic stop, it won't work. Do you have any idea what is going on? 

Latest progress:

• Fixed most of the minor bugs, still having issues with mirror reflections.
• Coronas for all lights except the rooftop lightbars have been hidden. This will make the lights look better from a distance and also will make it look better with or without RadianceV (still recommended so that brightness is appropriate)
• Federal Signal Arjent has been added as a lightbar option, again as an extra, all as part of the same model!

 

Finished hiding all coronas! Blue light version will be available soon:

Spoiler

(Sorry valor is not pictured, I forgot to screenshot that one!)