Jump to content

Sgt.Kanyo's handling mods


Recommended Posts

Have you tried any of these:

 

2232.0 0.36 85 0.0 0.2 -0.35 0.7 4 0.165 4.0 190 0.5 0.55 0.5 34.0 1.72 0.95 11.0 0.05 0.47 3.0 2.0 2.0 0.08 -0.08 -0.02 0.5 2.0 1.0 2.2 2.5 0.0 25000 400010 00000010 0

optimized for EVI's Police Interceptor SUV
 
2232.0 0.36 85 0.0 0.1 -0.38 0.7 4 0.165 4.0 190 0.5 0.55 0.5 34.0 1.72 0.95 11.0 0.05 0.47 3.0 2.0 2.0 0.1 -0.08 0.0 0.5 2.0 1.0 2.2 2.5 0.0 25000 400010 00000010 0

optimized for BPM's Police Interceptor SUV
 
2232.0 0.36 85 0.0 0.15 -0.28 0.7 4 0.17 4.0 196 0.45 0.55 0.5 35.0 1.8 0.95 10.0 0.05 0.47 3.0 2.0 2.0 0.1 -0.08 -0.015 0.46 2.0 1.0 2.2 2.5 0.0 25000 400010 00000010 0

optimized for PoliceFanatic's Interceptor SUV

 

Because I'm pretty sure I've already used that Explorer with a proper handling ofcourse. Maybe I forgot to release it or sth.

Link to comment
Share on other sites

Hmm you're either not using these handling lines properly or you are using a different Interceptor Utility. I've downloaded the car again, put it in game, and the camera is so low that even with the normal GTA IV handling it wouldn't roll over. Maybe you edited the vehicles.ide line so it uses a different handling? I haven't been messing too much with it in game, but it's probably the best to use the handling line for BPM's interceptor utility.

Link to comment
Share on other sites

  • 3 weeks later...

edit : found it  (i think) ( 1969.0 0.34 85 0.0 0.15 -0.38 0.7 4 0.185 5.0 205 0.5 0.55 0.7 35.0 1.8 1.0 11 0.11 0.48 3.5 2.3 2.3 0.1 -0.08 0.0 0.5 2.0 1.0 2.2 2.5 0.0 25000 400010 00000010 0)

 

wich handling line is to be used for this car ?  

if none exist can one be made for it ? 

 

2013 Ford Police Interceptor by EVI

http://www.gta-modding-chest.com/database/220-2013-ford-police-interceptor-liberty-city-police-department-els7/index.html

 

2013 Ford Police Interceptor Slicktop by EVI 

http://www.gta-modding-chest.com/database/219-2013-ford-police-interceptor-liberty-city-police-department-slicktop-unmarked-els7/index.html  

Edited by supergrunt

...

Link to comment
Share on other sites

  • 2 weeks later...
  • 4 weeks later...

@starcraftguy1

What do you mean bounces around?

 

@sergiyj

Also the crown vic handling shouldn't have any problem, I'm pretty sure it's the car you are using that is set up badly in zmodeler. Unless you use a crown vic with a modified center of mass and/or suspension.

Link to comment
Share on other sites

@starcraftguy1

What do you mean bounces around?

 

@sergiyj

Also the crown vic handling shouldn't have any problem, I'm pretty sure it's the car you are using that is set up badly in zmodeler. Unless you use a crown vic with a modified center of mass and/or suspension.

 

Its just as I said, it bounces and wobbles.  :wacko: What the hell else did you think I meant. I hear the tires bouncing.

Link to comment
Share on other sites

Well by bouncing, we could mean the actual realistic suspension play, like there is on vehicles with leaf springs, or you could mean an actual bug caused by an improperly exported vehicle from zmodeler or if not improperly exported, but quite simply zmodeler messed up the vehicle.

If you mean there's a hideous amount of understeer at higher speeds, and that if you jump down a set of stairs with the truck, and then it bounces a few times after that, that is actually part of the handling line, since I make them as realistic as I can. Remember you're not driving a racing car, but a 12 tonne truck.

If you have something similar, like, the vehicle is bouncing up n down by itself uncontrollably, that's a bug made in zmodeler.

 

Link to comment
Share on other sites

  • 4 weeks later...
  • 4 weeks later...

Ohi Sgt.Kanyo,

could you advice me if your handling line for '88 LTD will be proper for '87 Caprice (Compeast's one)? I compared both cars' weight, power etc. and it seems similar (it works OK in-game too) but I'd like to hear your opinion as you're the unquestionable expert.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...