Searching for a handling line for the :

2013 Explorer MSP By UndercoverChicken

 

'?do=embed' frameborder='0' data-embedContent>>

 

I tried all of the three on the first page - Without success still bouncing and rolling over

Have you tried any of these:

 

2232.0 0.36 85 0.0 0.2 -0.35 0.7 4 0.165 4.0 190 0.5 0.55 0.5 34.0 1.72 0.95 11.0 0.05 0.47 3.0 2.0 2.0 0.08 -0.08 -0.02 0.5 2.0 1.0 2.2 2.5 0.0 25000 400010 00000010 0

optimized for EVI's Police Interceptor SUV
 
2232.0 0.36 85 0.0 0.1 -0.38 0.7 4 0.165 4.0 190 0.5 0.55 0.5 34.0 1.72 0.95 11.0 0.05 0.47 3.0 2.0 2.0 0.1 -0.08 0.0 0.5 2.0 1.0 2.2 2.5 0.0 25000 400010 00000010 0

optimized for BPM's Police Interceptor SUV
 
2232.0 0.36 85 0.0 0.15 -0.28 0.7 4 0.17 4.0 196 0.45 0.55 0.5 35.0 1.8 0.95 10.0 0.05 0.47 3.0 2.0 2.0 0.1 -0.08 -0.015 0.46 2.0 1.0 2.2 2.5 0.0 25000 400010 00000010 0

optimized for PoliceFanatic's Interceptor SUV

 

Because I'm pretty sure I've already used that Explorer with a proper handling ofcourse. Maybe I forgot to release it or sth.

Yeah, that`s what i mentioned 

 

 

 

I tried all of the three on the first page - Without success still bouncing and rolling over

 

With those lines it sticks bouncy / rolling over in corners / regular turns :/

Hmm you're either not using these handling lines properly or you are using a different Interceptor Utility. I've downloaded the car again, put it in game, and the camera is so low that even with the normal GTA IV handling it wouldn't roll over. Maybe you edited the vehicles.ide line so it uses a different handling? I haven't been messing too much with it in game, but it's probably the best to use the handling line for BPM's interceptor utility.

I`ll take a look at it, thnx for the reply :)

edit : found it  (i think) ( 1969.0 0.34 85 0.0 0.15 -0.38 0.7 4 0.185 5.0 205 0.5 0.55 0.7 35.0 1.8 1.0 11 0.11 0.48 3.5 2.3 2.3 0.1 -0.08 0.0 0.5 2.0 1.0 2.2 2.5 0.0 25000 400010 00000010 0)

 

wich handling line is to be used for this car ?  

if none exist can one be made for it ? 

 

2013 Ford Police Interceptor by EVI

http://www.gta-modding-chest.com/database/220-2013-ford-police-interceptor-liberty-city-police-department-els7/index.html

 

2013 Ford Police Interceptor Slicktop by EVI 

http://www.gta-modding-chest.com/database/219-2013-ford-police-interceptor-liberty-city-police-department-slicktop-unmarked-els7/index.html  

Edited October 13, 201312 yr by supergrunt

While the model was edited to a 2012 PI by EVI, the car itself belongs to cj24, so you have to use the 2012 Ford Police Interceptor handling optimized for Cj24's PI

Edited October 14, 201312 yr by Sgt.Kanyo

Hey could you make handling line for my Kia Cee'd SW?

Yeah sure, is it released?

The Crimson Spartan handling doesn't work. It still bounces around and can't control the steering.
Any ideas?

The Crimson Spartan handling doesn't work. It still bounces around and can't control the steering.

Any ideas?

 

Same with the Crown Victoria

Edited November 25, 201312 yr by sergiyj

@starcraftguy1

What do you mean bounces around?

 

@sergiyj

Also the crown vic handling shouldn't have any problem, I'm pretty sure it's the car you are using that is set up badly in zmodeler. Unless you use a crown vic with a modified center of mass and/or suspension.

@starcraftguy1

What do you mean bounces around?

 

@sergiyj

Also the crown vic handling shouldn't have any problem, I'm pretty sure it's the car you are using that is set up badly in zmodeler. Unless you use a crown vic with a modified center of mass and/or suspension.

 

Its just as I said, it bounces and wobbles.  What the hell else did you think I meant. I hear the tires bouncing.

What the hell else did you think I meant.

There is no need for an attitude.

Well by bouncing, we could mean the actual realistic suspension play, like there is on vehicles with leaf springs, or you could mean an actual bug caused by an improperly exported vehicle from zmodeler or if not improperly exported, but quite simply zmodeler messed up the vehicle.

If you mean there's a hideous amount of understeer at higher speeds, and that if you jump down a set of stairs with the truck, and then it bounces a few times after that, that is actually part of the handling line, since I make them as realistic as I can. Remember you're not driving a racing car, but a 12 tonne truck.

If you have something similar, like, the vehicle is bouncing up n down by itself uncontrollably, that's a bug made in zmodeler.

 

There is no need for an attitude.

 

Whoops. Posted my unedited message as a a reply not a quote. I don't even remember doing that...   

Sorry.

Great mods, but one issue. I can't get the Silverado line to work. It doesn't line up at a certain point

Which silverado? The 2000 era? Also can you give me a detailed description of the problem you have?

Ohi Sgt.Kanyo,

could you advice me if your handling line for '88 LTD will be proper for '87 Caprice (Compeast's one)? I compared both cars' weight, power etc. and it seems similar (it works OK in-game too) but I'd like to hear your opinion as you're the unquestionable expert.

Anyone have better handling lines for the GTAV ported vehicles, specifically the Vapid Interceptor? The damn thing keeps rolling every turn...