Player Location Display V4.00

Alright, let's solve the positioning. If you wanna change where the PLD plugin is located at you need to change the following lines under [GENERAL] LocTextPosX = ??? and
LocTextPosY = ???. I am currently playing at 1920x1080 on windowed borderless, technically speaking it should be the same for fullscreen. Anyhow if you run the game like I do and want the PLD to be in line with the map then insert the following numbers where I previously told you. If this still isn't fine with you increase or decrease one number at a time, Y is for up and down and X is for right and left to explain it easier. NOTE: This is for 1920x1080 windowed borderless!

- LocTextPosX = 310

- LocTextPosY = 1026

My PLD Location: https://imgur.com/a/J2reeeP

Edited November 23, 20187 yr by ElijahHall

7 hours ago, ElijahHall said:

Alright, let's solve the positioning. If you wanna change where the PLD plugin is located at you need to change the following lines under [GENERAL] LocTextPosX = ??? and
LocTextPosY = ???. I am currently playing at 1920x1080 on windowed borderless, technically speaking it should be the same for fullscreen. Anyhow if you run the game like I do and want the PLD to be in line with the map then insert the following numbers where I previously told you. If this still isn't fine with you increase or decrease one number at a time, Y is for up and down and X is for right and left to explain it easier. NOTE: This is for 1920x1080 windowed borderless!

 

- LocTextPosX = 310

- LocTextPosY = 1026

 

My PLD Location: https://imgur.com/a/J2reeeP

If I wanted the position you have, but at the top of the screen instead, would I add - befpre PosY?

9 minutes ago, Giordano said:

 

If I wanted the position you have, but at the top of the screen instead, would I add - befpre PosY?

http://www.brenz.net/snippets/xy.asp This should help you

10 minutes ago, Giordano said:

 

If I wanted the position you have, but at the top of the screen instead, would I add - befpre PosY?

Well since 1026 is in line with the map, I suppose somewhere close to 0 would make it higher up on the screen. Can't really say what though since my goal was to add it in line with the map, but try to put it on 100 and go from there.

I don't even know if you can go below 0, perhaps by adding - before the number like you suggested, I am not sure though. But the worst thing that could happen is that it doesn't work, then you can always revert back to the number it was.

Let me know how it goes!

6 minutes ago, ElijahHall said:

Well since 1026 is in line with the map, I suppose somewhere close to 0 would make it higher up on the screen. Can't really say what though since my goal was to add it in line with the map, but try to put it on 100 and go from there.

 

I don't even know if you can go below 0, perhaps by adding - before the number like you suggested, I am not sure though. But the worst thing that could happen is that it doesn't work, then you can always revert back to the number it was.

 

Let me know how it goes!

The - definitely works because I got it on the top of the screen.  The issue is that it's at the very top, to the point of cutting off.  I wasn't exactly sure how to lower it.

LocTextPosY = -8035

is where it is at now.  I'm not sure if I should go up in numbers, or down.

@Giordano

This is LocTextPosX = 100
             LocTextPosY = 100

If you want it more towards the top left corner. Lower both 100's

2 minutes ago, Giordano said:

 

The - definitely works because I got it on the top of the screen.  The issue is that it's at the very top, to the point of cutting off.  I wasn't exactly sure how to lower it.

 

LocTextPosY = -8035

 

is where it is at now.  I'm not sure if I should go up in numbers, or down.

Well, the closer to zero you go, the closer to the center on the screen you go. So short answer, go towards 7000 and eventually you'll hit the sweet spot!

3 minutes ago, ElijahHall said:

Well, the closer to zero you go, the closer to the center on the screen you go. So short answer, go towards 7000 and eventually you'll hit the sweet spot!

Having a number as high as 7000 means Gio is from the future and is playing on an 8k gaming setup lol.

the numbers must be between 0-1920 and 0-1080. That is for 1920x1080 res. The numbers cannot go negative. That will throw it off screen.

1 minute ago, Pavy said:

Having a number as high as 7000 means Gio is from the future and is playing on an 8k gaming setup lol.

the numbers must be between 0-1920 and 0-1080. That is for 1920x1080 res. The numbers cannot go negative. That will throw it off screen.

That is very true, but Gio did say it was currently at -8035 and it was barely on the screen making it cut off. So he must play at a bigger resolution, right?

Any plans on adding the speed limits of roads in the future? 

On 2/2/2019 at 2:09 PM, Captain Peanut said:

Any plans on adding the speed limits of roads in the future? 

YES PLEASE!

On 2/2/2019 at 4:09 PM, Captain Peanut said:

Any plans on adding the speed limits of roads in the future? 

PLEASE!!!

@Captain Peanut

@w1zard

 I found an alternative and i love it :

Does anyone know if the keybinds "Ctrl, Alt + L" can be changed, and if so, how? I couldn't find anything in the .ini and can't ask the author given they haven't been active for quite sometime. I'd like to match them to my "hide minimap" keybind so I can hide both at the same time.

*EDIT*
Anyone?

Edited May 6, 20196 yr by LostBoyLazarus

Does this mod still works?

10 hours ago, vitus kaundu said:

Does this mod still works?

look 2 posts up, i'm using rage show my location aswell. it crashes occasionaly on load so far no other complaints here.

13 hours ago, vitus kaundu said:

Does this mod still works?

Still using it, no crashes or anything.

For anyone who is having issues running this mod, this is what I did that helped me.  I was having issues getting this mod to work:

At first it was a windows 10 issue (running this on win10)...  It was not the issue.

Then I thought I didn't place the files in the correct directory...  Not the issue.

Read some of the forum posts about a "CTRL + ALT+ L" shortcut...  Didn't have any effect for me/didn't work.

Then I read about updating Scripthook...  BOOM!  Works like a charm now!  Update Scripthook and place the files in the Grand Theft Auto main directory.

LINK for Scripthook: http://www.dev-c.com/gtav/scripthookv/

dosent work on lspdfr 0.4.2 

crash my LSPDFR every time 

Was the mod ever updated to show the speed of the vehicle your in?

Love this 10/10!! For anyone using a 34 inch monitor or above try these settings for better placement: LocTextPosX = 480 LocTextPosY = 1020. just had to play around with it for awhile until I was happy with the placement. Attached are before and after pictures.

Edited December 22, 20196 yr by TheNewbPlayz

just wondering does anyone know how to get this to work on a cfx fivem server as i could not get it to work but it is most likely my fault as im new to this

Hello, my game always crashes with PLD, I read that i just need to install the older version. Please can you send me the previous version of Player Location Display or explaine what to do in my situation?

Hello help please as soon as I install PLD start playing it takes 1-2 minutes and the game turns off what is the problem everything is correctly installed everything is updated but the game turns off.😥

@Lt.Caine Help! I want to use this mod very much, but once the gameplay begins, GTA simply crashes. 

Hope you are gonna answer soon,

    Concerned Player.