Snohomish County Sheriff's Inspired Vehicle Mega-Pack [ELS] 4.0.0

Great work. You've come a long way in a short amount of time. I'm proud of you.

5 minutes ago, Him1250 said:

Great work. You've come a long way in a short amount of time. I'm proud of you.

Couldn't have done it without you, truly.

not bad for your first vehicle pack

looks good, do the pushbars have collisions? had to ask ;p

4 minutes ago, Kilyin said:

looks good, do the pushbars have collisions? had to ask ;p

I tested them and they do, however for whatever reason, whatever I do, the cols are weird on the sides of the rambar for the tahoe.

(Lemme know if one of them doesn't though)

me like! I've installed two vehicles so far and I'm having some issues with the lighting. im sure its an installation error. I've tried them in three locations with patchday 13 being my latest Patchday13 being my latest patchday, I've tried them in Patchday3, 11, and 13. Everything else is great. 

CVPI= When I hit the "[" key for the steady lit light bar, half of the light bar does not light up. It does however light up normally otherwise.

Tahoe= The light bar does not turn on. Everything else works. 

Thoughts?

13 minutes ago, TL1223 said:

me like! I've installed two vehicles so far and I'm having some issues with the lighting. im sure its an installation error. I've tried them in three locations with patchday 13 being my latest Patchday13 being my latest patchday, I've tried them in Patchday3, 11, and 13. Everything else is great. 

 

CVPI= When I hit the "[" key for the steady lit light bar, half of the light bar does not light up. It does however light up normally otherwise.

Tahoe= The light bar does not turn on. Everything else works. 

 

Thoughts?

Install the ELS file.

They are installed. That's how i was able to hit the "[" button for the steady light bar to come on. I can try reinstalling again but i dont think that'll change a thing. 

7 minutes ago, TL1223 said:

They are installed. That's how i was able to hit the "[" button for the steady light bar to come on. I can try reinstalling again but i dont think that'll change a thing. 

The steady light bar is just how the cruise lights were setup for the cvpi (That can be changed in the vcf), and I'm not sure about the Tahoe, as it seems to be working. Just check in Open IV that it looks correct with all the light textures popping up. If that looks good then it is something with the vcf.

Same thing happens to me with the tahoe. Light bar does not light up. I have it installed in patchday3

6 minutes ago, kcoynejr said:

Same thing happens to me with the tahoe. Light bar does not light up. I have it installed in patchday3

Could you possibly post a screenshot of what the vehicle looks like in openiv? Thank you!

thanks for the response @thegreathah. I took a look at the vcf and resolved the issue on the CVPI. As for the Tahoe, I did noticed the Tahoe's light bar was super dark when it spawned so that might be what is causing the light to not emit through. 

Take a picture of the sheriff.yft file?

5 minutes ago, TL1223 said:

thanks for the response @thegreathah. I took a look at the vcf and resolved the issue on the CVPI. As for the Tahoe, I did noticed the Tahoe's light bar was super dark when it spawned so that might be what is causing the light to not emit through. 

Ahh yes. I forgot about window tints! I've had an edited vehicles.met for so long I forgot. Make sure to set it to clear!

9 minutes ago, kcoynejr said:

Same thing happens to me with the tahoe. Light bar does not light up. I have it installed in patchday3

5 minutes ago, thegreathah said:

Ahh yes. I forgot about window tints! I've had an edited vehicles.met for so long I forgot. Make sure to set it to clear!

 

 

Thank u!

1 hour ago, thegreathah said:

Ahh yes. I forgot about window tints! I've had an edited vehicles.met for so long I forgot. Make sure to set it to clear!

 

 

Do you know a way to clear the tint so it spawns without the tint?

Edit: So I went in to edit the default tint line to spawn without tint however, it still spawns with tint for some reason. I enabled the trainer and the default tine line shows "None". The tint would only disappear when i toggle the tint from "Light tint", "Smokey" or whatever shades there are and then back to "None".

Edited December 31, 20169 yr by TL1223

1 hour ago, TL1223 said:

Do you know a way to clear the tint so it spawns without the tint?

Edit: So I went in to edit the default tint line to spawn without tint however, it still spawns with tint for some reason. I enabled the trainer and the default tine line shows "None". The tint would only disappear when i toggle the tint from "Light tint", "Smokey" or whatever shades there are and then back to "None".

edit vehicles.meta in \update\update.rpf\common\data\levels\gta5

search for the modelname you replaced

change the diffuseTint line to:

<diffuseTint value="0x00FFFFFF" />

Edited December 31, 20169 yr by Kilyin

7 minutes ago, Kilyin said:

 

edit vehicles.meta in \update\update.rpf\common\data\levels\gta5

 

search for the modelname you replaced

 

change the diffuseTint line to:

 

<diffuseTint value="0x00FFFFFF" />

i did that already and it didnt work for some reason. i also searched to see if there were other Sheriff2 models in there to be sure i captured it all and there was only one. 

Just some hopefully welcomed constructive criticism for the next update: the cvpi's wrap-arounds should be level with the bumper where it meets the body, so just a little bit lower, and the spotlight on the Tahoe should be up the A puller just a tad. *see attached* 

other than that pack is awesome!!!!! Great job!

Hey Bud. Great job. The cars looks wonderful. As above, the 2015FPIU has the same lightbar tint issue. I will trouble shoot with some of the suggestions above. One other little thing I found. I edited the VCF for the Aux Coronas for the reverse lights. Your default is right and left "blue" which is perfect, however when I change them to "11" for strobes, only the left side lights up blue, the right side does not. It does not light up at all which is strange. Any ideas?

5 hours ago, Chris B 1B 86 said:

Hey Bud. Great job. The cars looks wonderful. As above, the 2015FPIU has the same lightbar tint issue. I will trouble shoot with some of the suggestions above. One other little thing I found. I edited the VCF for the Aux Coronas for the reverse lights. Your default is right and left "blue" which is perfect, however when I change them to "11" for strobes, only the left side lights up blue, the right side does not. It does not light up at all which is strange. Any ideas?

If you are talking about the 2015 FPIU with the back strobes, I know. It's unfortunately the DEV model at this point. I'm trying to figure out how to fix it still :P

6 hours ago, PantherP71 said:

Just some hopefully welcomed constructive criticism for the next update: the cvpi's wrap-arounds should be level with the bumper where it meets the body, so just a little bit lower, and the spotlight on the Tahoe should be up the A puller just a tad. *see attached* 

Thanks so much for the feed back! I will try to fix that ASAP

@DevinKanMods Ahhh, thanks for letting me know the correct credits! Glad you are enjoying the models.

4 minutes ago, thegreathah said:

@DevinKanMods Ahhh, thanks for letting me know the correct credits! Glad you are enjoying the models.

Yeah, you did a great job for a first model pack 

Happy new year to The Community from my friend Hunter from Sarasota,Florida.2016 was a Bad year,about 60 Police Officer got Shot in the line of Duty BUT! 2017 becomes the best year in the History.

FROHES NEUES JAHR(happy new year)

i'm very happy to see this has done so well. its very deserving and i hope we get to see more from you in 2017.