✪ Real Radiance ✪ [for NVR & VisualV] 3.9.0

Does it work with  vanilla graphics well ? Because I used Radiance V and it was soo bright! 

55 minutes ago, Bublick said:

Does it work with  vanilla graphics well ? Because I used Radiance V and it was soo bright! 

1 hour ago, Bublick said:

Does it work with  vanilla graphics well ? Because I used Radiance V and it was soo bright! 

Yes, but recommed is my other file as @SnowmanFred already said. (Its's not so bright)

Please do write a review, if you're happy with the mod.

On 2/9/2019 at 1:38 PM, Steeeb said:

Hi! If you still have the problem, download the latest version of NaturalVision Remastered. Open the file. After that, go to "Optional Add-Ons" and look for a folder called naturalvision uninstaller. Take the oiv file in the folder, drag it out into desktop, go to openiv, run the package installer and choose the file and click install. Thats it!

On 5/23/2019 at 2:09 PM, BOSSSSSSA said:

Yes, but recommed is my other file as @SnowmanFred already said. (Its's not so bright)

Please do write a review, if you're happy with the mod.

I'm not sure why, and I'm not sure which visualsetting in the download is the culprit, but my coronas are massive.  They are even larger than the lights on the light bar.  Anyway of toning them down, or no?  I'm guessing no since coronas is a graphics.ytd thing.  For whatever reason there's an incompatibility between the NVR graphics.ytd and the visualsettings in the download.

what does the oiv install. ive had really bad experiences with oiv packs where it'll mess something up and not being able to find what to uninstall results in me having to delete and reinstall everything again. 

or can you please release a manual install version ???

36 minutes ago, tonesnaps said:

what does the oiv install. ive had really bad experiences with oiv packs where it'll mess something up and not being able to find what to uninstall results in me having to delete and reinstall everything again. 

 

or can you please release a manual install version ???

I have found with .oiv files you can rename them to .zip and then open them and see what is inside them and usually there is a content.xml that shows where the paths are.

6 hours ago, tonesnaps said:

what does the oiv install. ive had really bad experiences with oiv packs where it'll mess something up and not being able to find what to uninstall results in me having to delete and reinstall everything again. 

 

or can you please release a manual install version ???

The .OIV File makes the Lightning of the car 100% Realisitc.

You can now see the Emergency-Lighning of your car on house walls - or other terrain - It's awesome. (You will notice a huge difference)

Example:

9 hours ago, Reddington said:

 

I'm not sure why, and I'm not sure which visualsetting in the download is the culprit, but my coronas are massive.  They are even larger than the lights on the light bar.  Anyway of toning them down, or no?  I'm guessing no since coronas is a graphics.ytd thing.  For whatever reason there's an incompatibility between the NVR graphics.ytd and the visualsettings in the download.

Well, I am not sure what causes your issue.

I recommed you to use the unistaller for the .OIV that I will add in a new version, (2.5.1), and then just install the whole thing again.

For me there no issues, everthing elses will be fixed in 2.5.1

7 hours ago, Unknown Soldier said:

I have found with .oiv files you can rename them to .zip and then open them and see what is inside them and usually there is a content.xml that shows where the paths are.

thank you so much and bossssa you as well. looking forward to the next update i really love this visual mod !

did you mess with the carcols ? 

7 hours ago, Unknown Soldier said:

I have found with .oiv files you can rename them to .zip and then open them and see what is inside them and usually there is a content.xml that shows where the paths are.

so i did what Unknown Soldier told me to do and it's installation path is for NVR 

although i do have visualv installed i do not use NVR. lets see if this causes any issues. 

4 hours ago, tonesnaps said:

thank you so much and bossssa you as well. looking forward to the next update i really love this visual mod !

did you mess with the carcols ? 

so i did what Unknown Soldier told me to do and it's installation path is for NVR 

 

although i do have visualv installed i do not use NVR. lets see if this causes any issues. 

 

It should work with VisualV (for me it worked- and I had no issues)

And I do have a different carcols.ymt

It sucks cause I cannot use any of these light enhancing mods on GTA V... I have to use the Visual V default visualsettings which the lights do not look realistic or bright but they are somewhat like police lights because with all these mods it takes all the saturation out of the lights and makes them look white like the red and blue is washed out a lot... I don't get why, GTA IV ELS lights looked great with the ELS visual settings but the ELS GTA V lights do the same as this it just looks watered down. Maybe it is because I have to play on 800 resolution?

3 hours ago, Unknown Soldier said:

It sucks cause I cannot use any of these light enhancing mods on GTA V... I have to use the Visual V default visualsettings which the lights do not look realistic or bright but they are somewhat like police lights because with all these mods it takes all the saturation out of the lights and makes them look white like the red and blue is washed out a lot... I don't get why, GTA IV ELS lights looked great with the ELS visual settings but the ELS GTA V lights do the same as this it just looks watered down. Maybe it is because I have to play on 800 resolution?

It’s probably because your PC is to bad 

If you play on 800 Pixel, with lags than the visualsettings will not work. (At least Full HD with -60fps)

Basically your PC is to to bad- sadly 

i downloaded the lastest version and i have very bright tailights and stop lights. any way to fix this ?

Does this edit anything outside of "emissive bits" in visualsettings.dat? 

4 hours ago, ineedmoreguns said:

Does this edit anything outside of "emissive bits" in visualsettings.dat? 

Yes, taxi ads

7 hours ago, SGT.Dillehay said:

i downloaded the lastest version and i have very bright tailights and stop lights. any way to fix this ?

Well, I am curious- fix update will come

Really Awesome, works super Good and the Installation couldn't Been easier.  

On 5/25/2019 at 6:19 AM, Unknown Soldier said:

I have found with .oiv files you can rename them to .zip and then open them and see what is inside them and usually there is a content.xml that shows where the paths are.

Yes, thank you for the tip!

13 hours ago, BOSSSSSSA said:

Yes, taxi ads

Well, I am curious- fix update will come

yea but i downloaded the corona be gone setting and it helped it alot so if anybody has any issues like that download that and it will seem to help with the bright rears unless you can solve it but great work i love your radiance mod but is there anyway to make the lights brighter or more reflective off the buildings

10 hours ago, SGT.Dillehay said:

yea but i downloaded the corona be gone setting and it helped it alot so if anybody has any issues like that download that and it will seem to help with the bright rears unless you can solve it but great work i love your radiance mod but is there anyway to make the lights brighter or more reflective off the buildings

Thanks.

Yes I can make the light brighter, in a future update.

The reflection however should stay as it is or it’ll cause problems, or to much performance.

probably gonna be tomorrow (I am always switching between MVGA and NVR, takes some time) 

is it 3.9.1 or 3.9.0 because it says when you go to choose the file 3.9.0 final ???

7 hours ago, tonesnaps said:

is it 3.9.1 or 3.9.0 because it says when you go to choose the file 3.9.0 final ???

I guess, I made a mistake.

however, If everyone is happy (no bugs and co.), then this is the last version.

hi,

i think you cannot use single visualsettings.dat files for all (NVR, VisualV, and MVGA), since they have their own (different) settings in visualsettings.dat

3 hours ago, Pazzi said:

hi,

 

i think you cannot use single visualsettings.dat files for all (NVR, VisualV, and MVGA), since they have their own (different) settings in visualsettings.dat

That’s the Reason why I have a Pack for MVGA and one for NVR & VisualV.

(VisualV & NVR are compatible toghter, so the my Mod is too.)

for MVGA there’s a different visualsettings.dat, that will literally work the same.

I like this one.

16 minutes ago, Union612 said:

I like this one.

Consider writing a review?

34 minutes ago, BOSSSSSSA said:

Consider writing a review?

I'm going to right now