Scuderio

2013 Dodge Charger - Los Angeles Police Department made by Scuderio
---------------------------------------------------------------------------------
Version 1.0
---------------------------------------------------------------------------------
This is the most accurate I could get right now. But stay tuned updates will follow :)
---------------------------------------------------------------------------------
Information about the car and the progress:
The base model was converted and slightly edited by CodeX, because some parts didn't fit to a LAPD charger I changed them.
I began with the interior, where I made the computer screen and the textures for it while Solo was working on the Arjent.
After that I put the rambar on it which I already used on my old "LAPD" charger.
With the time I got many parts like the Charger Police Radio with intigrated siren controler, the Coban dashcam and many more parts.
This project here intoduced me into the world of modeling, and the first parts I modelt you also can see on the charger like all the antennas,
the keyboard inside of the charger and the complete center console.
The charger is not finished at the moment so updates will follow. The following things are inaccurate: The microlights in the front (used to Micropulses and not Code 3 ones),
the trunk (has no equip at the moment), the backseats used to be foam in real life ,the partition is a little different and the center console is not that accurate.
So these things will be changed in the future.
---------------------------------------------------------------------------------
Extras:
Extra1: ALPR system for the lightbar
Extra2: Steady Burns
Extra3: Rambar
Extra4: Dashcam
Extra5: Antennas
---------------------------------------------------------------------------------
Beta testers were:
Vladimir850
RedBullGermany
Steinberg
ghost128
---------------------------------------------------------------------------------
VIdeos:
-----------------------------------------------------------------------------------
You are not allowed to upload this to another site, if I will catch you doing that, you will get banned on multiple modding sites!!!
Car made by Scuderio
---------------------------------------------------------------------------------
15.09.2016 European Date

2013 Dodge Charger - Los Angeles Police Department made by Scuderio
---------------------------------------------------------------------------------
Version 1.0
---------------------------------------------------------------------------------
This is the most accurate I could get right now. But stay tuned updates will follow :)
---------------------------------------------------------------------------------
Information about the car and the progress:
The base model was converted and slightly edited by CodeX, because some parts didn't fit to a LAPD charger I changed them.
I began with the interior, where I made the computer screen and the textures for it while Solo was working on the Arjent.
After that I put the rambar on it which I already used on my old "LAPD" charger.
With the time I got many parts like the Charger Police Radio with intigrated siren controler, the Coban dashcam and many more parts.
This project here intoduced me into the world of modeling, and the first parts I modelt you also can see on the charger like all the antennas,
the keyboard inside of the charger and the complete center console.
The charger is not finished at the moment so updates will follow. The following things are inaccurate: The microlights in the front (used to Micropulses and not Code 3 ones),
the trunk (has no equip at the moment), the backseats used to be foam in real life ,the partition is a little different and the center console is not that accurate.
So these things will be changed in the future.
---------------------------------------------------------------------------------
Extras:
Extra1: ALPR system for the lightbar
Extra2: Steady Burns
Extra3: Rambar
Extra4: Dashcam
Extra5: Antennas
---------------------------------------------------------------------------------
Beta testers were:
Vladimir850
RedBullGermany
Steinberg
ghost128
---------------------------------------------------------------------------------
VIdeos:
-----------------------------------------------------------------------------------
You are not allowed to upload this to another site, if I will catch you doing that, you will get banned on multiple modding sites!!!
Car made by Scuderio
---------------------------------------------------------------------------------
15.09.2016 European Date

2013 Dodge Charger - Los Angeles Police Department made by Scuderio
---------------------------------------------------------------------------------
Version 1.0
---------------------------------------------------------------------------------
This is the most accurate I could get right now. But stay tuned updates will follow :)
---------------------------------------------------------------------------------
Information about the car and the progress:
The base model was converted and slightly edited by CodeX, because some parts didn't fit to a LAPD charger I changed them.
I began with the interior, where I made the computer screen and the textures for it while Solo was working on the Arjent.
After that I put the rambar on it which I already used on my old "LAPD" charger.
With the time I got many parts like the Charger Police Radio with intigrated siren controler, the Coban dashcam and many more parts.
This project here intoduced me into the world of modeling, and the first parts I modelt you also can see on the charger like all the antennas,
the keyboard inside of the charger and the complete center console.
The charger is not finished at the moment so updates will follow. The following things are inaccurate: The microlights in the front (used to Micropulses and not Code 3 ones),
the trunk (has no equip at the moment), the backseats used to be foam in real life ,the partition is a little different and the center console is not that accurate.
So these things will be changed in the future.
---------------------------------------------------------------------------------
Extras:
Extra1: ALPR system for the lightbar
Extra2: Steady Burns
Extra3: Rambar
Extra4: Dashcam
Extra5: Antennas
---------------------------------------------------------------------------------
Beta testers were:
Vladimir850
RedBullGermany
Steinberg
ghost128
---------------------------------------------------------------------------------
VIdeos:
-----------------------------------------------------------------------------------
You are not allowed to upload this to another site, if I will catch you doing that, you will get banned on multiple modding sites!!!
Car made by Scuderio
---------------------------------------------------------------------------------
15.09.2016 European Date

Yet another Livery for LSPD:FR. Custom Las Cruces End DWI Police/Taxi texture.
I've also added a Los Santos End DWI Police/Taxi texture
Please click on the vehicle below to be directed to the correct model.
Vehicle:
 2011 CVPI by BxBugs123

*****More textures to be added in the near future.*****
I put a lot of work/time into this, so if anyone could get me a in-game screenshot I would really appreciate it.
Do you like my work? Consider a small donation, it keeps the stuff going ;) Also a nice review is always nice.Thanks.
Cheers,
Chris
******************** If you use my textures on YouTube can you PM me the link please. *******************
 

Do not spread without my permission or I will TP your house.

KTFDO is a RagePluginHook plugin that stops the door from closing every time you leave your vehicle.
Requirements: a recent copy of RagePluginHook (0.41+)
Usage:
Open and close door normally: Tap the leave vehicle key once Open door and leave open: Hold down the leave vehicle key

This file includes two types of window bars for the Tahoe; a window bar with a fan and one without for a vehicle with a K9 set-up. Who's to say it's specifically for the Tahoe though...
Big thanks to:
Maurice97 for suggesting this part,
iRagingNinja for helping troubleshoot and testing in GTA IV,
OfficerWalters for the screenshots and testing in GTA V.
GTA IV NOTE: Due to the design and the way I assigned the materials, if you attach the window bar to the door, certain sections will disappear behind the window. The only way to fix it with this version is to either remove the window so it can be attached to the door or leave the window bars at the top of the vehicle's hierarchy leaving it separate from the door. I don't plan on fixing it because...I have this...thing...I have to go to...and I'm...busy...ya, that's it.
 

This is an unfinished model, but I decided to release it anyway since we have been waiting long enough for an unlocked 2016 FPIU. Also, since this is my first time converting a car to GTA 4, I don't know how to fix a lot of these issues. Personally, I'm fine with the way it is, but you can totally edit it if you want to. If you want to release a fixed one, do what you will. If you want to release a fixed version unlocked, I strongly encourage you. If you want to convert it to GTA 5, GTA SA, or any game, go ahead. It's your model now, enjoy!
 
Shoutouts:
-Sgt. Goetz for buying the model!
-Jasonct203 for the support!
-All of the naysayers for keeping me determined
 
Changelog for v0.3A
-Better collisions
-Front indicator coronas fixed
 
Changelog for v0.3B
-Livery issue fixed
-Improved collisions
-New foglight modules
 
Changelog for v0.4A
-Improved collisions
-New door panels
-Less invisible parts
 
Changelog for v0.4B
-Front bumper no longer disappears
-Other collisions are improved
-Added Flex-Fuel badge
-Updated parking lights
 
Changelog for v0.4B2
-Fixed mapping on the trunk
 
Side note- I'm still having issues with the window and door collisions.
 
Known bugs:
-Rear bumper disappears after getting hit enough times (have no idea why)
-No engine model, so the hood stays shut
-Unbreakable windows
-Able to phase through the doors.

Realistic vehicle based radar system. Vehicle direction segmentation, antenna selection, fastest mode, etc. This is a simulation of the Kustom Signals Golden Eagle II radar system which is very popular among law enforcement in the United States.
Features:
Realistic graphical interface Realistic modes 6 modes 4 moving and 2 stationary modes just like it's real life counterpart. Fastest / Closest(strongest) modes Realistic capture area Cone shaped capture area in front and behind your vehicle Lock system realistically locks the mode, range, patrol speed and target speeds
 
How to use:
 
Installation:
 
Key bindings / METRIC:
J - Power K - Mode (main modes) AlT+K - Fastest / Strongest(closest) toggle L - Lock toggle UPDATING KEYS & changing to metric (KPH):
Modes explanation:
Known Issues / Bugs:
Most issues are caused due to improper installation. MAKE SURE YOU'VE INSTALLED PROPERLY!

Here is a Hazard Systems Slic Controller For Devs to use as im feeling generous, Enjoy! 
If there is any problems send me a PM or comment below.
Please don't Redistribute This Controller anywhere else unless locked and used on a model or unless i have given you permission directly!

original model:
Ford CVPI [DEV] 1.2.0 By F5544
http://www.lcpdfr.com/files/file/8765-ford-cvpi-dev/

this is my version, it's nothing of special, but was fun to play with ZModeler, and now I want to share it
-many small changes
-added some details 
-reworked headligths and indicators 
 (I know, it's not like the original, but I like it so)
-3 in game variants
 with pushbar
 with scanner
 without pushbar and scanner
-work in progress
NOTE (optional):
if you want to use this car like a sheriff car launch OpenIV Mods\update\update.rpf\common\data\levels\gta5 extract and edit vehicles.meta, search sheriff and change this line from <handlingId>SHERIFF</handlingId> to <handlingId>POLICE</handlingId> save and import, because the sheriff handling is different and you can see the rear suspension a little bit lower

Credits
CVPI:
-Ford CVPI from Driver San Francisco
-Ported to GTA IV by F5544.
-Edited to police version by Cj24 and KevinDV.
-Ported to GTAV by F5544.
-Liveries by BogdanM.
-Beta tested by PimDSLR, Dbock1989, Prophet.
-Interior parts made by Bxbugs123/Scheafft with permission to use.
-edited by legionarius
OTHER:
-MX7000 lightbar.(LAPD version) by F5544
-ms_alpr (apr) scanner r1 by Martin Stainman
-spotlight handle: WHELEN LED PAR 46 SPOTLIGHT DEV_WHELEN_PAR-46_SPOTLI By EVI 
-spotlight by legionarius
-Go Rhino pushbar by legionarius
-Police Equipment 2.0 By Sheriff Van Dyck
-antenna from ALPR System 0.1 By Martin Stainman
-0taku - BlackJesus1 technical advice
DO NOT RE UPLOAD, THX

Whelen Cencom Sapphire/Red/Gold siren controller. lights up.
 
 
you also need to download this file, as it includes some basic textures that i always use. 
 

This work is licensed under a
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. By downloading this file you agree to the TERMS OF USE AND DISTRIBUTION, If you can not abide by those terms then do not download this file.

Using the Rancher from IV. We have successfully replicated a 240-Robert unit like the Bronco featured in the TV Series of the same name. At this time there is no interior equipment, these will likely be added in later down the line. It features a Aerodynic lightbar that was used in the show.

PLEASE NOTE:
Requires the carcols.ymt for the Aerodynic to correctly function

THIS IS ONLY FOR SINGLE PLAYER.
NOT OFICALLY PART OF EUP
THIS IS NOT A TEXTURE EDIT. THIS PED WAS EDITED BY ME IN ZMODELER 3
YES I'M THE REAL AUTHOR. J9090 IS JEFFREYZZZ3304 HERE.
 I made a LSPD EUP Ped model.
Instructions:
Download the file(Should be done) 
Import the files to C:\Program Files Grand Theft Auto V\update\x64\dlcpacks\eup\dlc.rpf\x64\models\cdimages\eup_componentpeds.rpf\mp_m_freemode_01_male_heist
 
If no EUP, import into Grand Theft Auto V\update\x64\dlcpacks\mpheist\dlc.rpf\x64\models\cdimages\mpheist_streamedpeds.rpf\mp_m_freemode_01_male_heist
Done 
Required: 
OPENIV
Thank you 
J9090 
CREDITS
AlexAshfold for EUP and inspiration. 
Oleg for Zmodeler 3 and Tips
Gta5-mods and lcpdfr for hosting file
Thank you.
P.S:This was my third attempt on a ped. Please rate low. This is just a fix to a tiny detail. Thank you for reading to the bottom. 
Feel free to include this in a pack.
 

BUGS
UV mapping is not great. The awkward shape of the original texture makes it challenging to UV map it.

Hi there! Here is a true classic :)
,,As seen on tv...''

A 1997 Ford Crown Victoria P71 with authentic LAPD equipment. This is not a christmas tree, simplicity makes it beautiful :) Happy playing, make a reply if you like it! (Known bugs being fixed)

Note that front steady burn light has flashing coronas around it, because game limitations, but i think it looks cool this way :) ,,Workable,, spotlight version soon....

For people who are still getting sick from being ran over by drivers freaking out because of gunshots, StopShittingbricks® might be the answer.
StopShittingBricks® stops peds in cars from, well, shitting bricks / freaking out and running you over.
StopShittingBricks® is not a plugin but a file modification, so performance drops are non-existent.
StopShittingBricks® will stop most peds in vehicles from freaking out when shots are fired, they will still react when being shot at.
Peds on foot are unchanged.
Please note that this is an alpha version, and it is not perfect yet, some cars might still freak out.
Place the included events.meta in update/update.rpf/common/data using OpenIV.
A backup file is also provided.

I'm very proud to finally present you the latest FancyPanties Development project called CVPI-VUV (Various-Utility-Vehicle)
 
VUV (Various-Utility-Vehicle) means this car contains several additional parts beside extra parts, that can be mounted. They can be applied via Mod-Menu / Benny’s Custom Parts through native trainer:
5x Setina pushbar versions
5x interior/rear compartment layouts
5x spotlight versions
4x antenna versions
3x Setina gunrack versions
2x Whelen rear interior lighters
2x steeringwheels
1x Toughbook C19
1x Setina prisoner compartment
1x Python III radar
1x rainguards
1x statehat at front passenger seat
 
 
Extra / Add / variation parts explanation:
______________________________________________________________________________________
veh_components_menu:
extra_1: tough book c19
extra_3: boot antenna v1
extra_4: setina prisoner compartment
extra_5: python III radar
extra_8: setina pushbumper v1
extra_11: setina pushbumper v2
extra_12: statehat on passenger seat
veh_mod_menu:
spoiler: antenna_layout_2-4
front bumper: gunrack layout 1-3
skirt: whelen rear interior lightbar v2
grill: spotlight layout 2-5
bonnet: setina v1 pushbumper layout 2-5
benny’s vehicle mod menu:
trim design: interior/rear compartment layout 2-5
steering wheel: steering wheel for compartment 2
windows: rain guards on doors
 
some features have already been showcased in the preview video:
new light pattern / trafficadvisor showcase video:
 

2003 CVPI with an MX7000. Simple but still a nice vehicle. It has dual spotlights which are non-functioning for the time being. It also has a Setina PB200 Pushbar which is extra 2. 
 
Planned for this model:
1.Re-size spotlights and make them functioning. 
2. Make passenger side spotlight extra. 
3. Add some more equiptment if possible. 
4. Any requests.
5. Add option for centercaps.
 

By a lot of requests I upload it here. This is my own font and some other stuff I used to create LAPD skins.
Feel free to use it to create ur own LAPD skins. Credits to me and fcvp71 (bumper stickers) are required.

Loosely based of Orange County Sheriff,CA. Includes texture for clear glass. 
Optimized for:

Video by @thegreathah
 

Siren Mastery
 
SUPPORT IS NO LONGER OFFERED - FEEL FREE TO HELP UPDATE THE CODE 
Siren Mastery is now open source. https://github.com/Albo1125/SirenMastery
Siren Mastery is a script modification that allows you to master your siren tones. Toggle to your secondary siren at the press of a key/button, silence your siren using any key/button you like and even control exactly which 'secondary' siren plays! You can be up and running with Siren Mastery within 5 minutes (installation tutorial click HERE).
Requirements - some of these are included (credits go to their appropriate authors):
Albo1125.Common 6.6.4.0 or higher (included) RAGEPluginHook 0.51 or higher (not included) NAudio 1.8.0.0 (included) A legal copy of GTA V (version 1.0.1011.1 or above). There is also a download to free up unneeded controller bindings so they can be used for Siren Mastery. Get it here.
You can find some new, customised UIs for Siren Mastery in the spoiler below:
 
Summary of current features (please check documentation carefully too):
Change the Siren Toggle key/button and assign it an optional modifier key/button. Change the 'lights only' toggle key/button and assign it an optional modifier key/button. This works even if your siren is off so you can control whether your siren should play before turning your lights on. New 'Toggle Secondary Siren' key/button with an optional modifier key/button. This allows you to switch to secondary sirens without having to hold down a key/button. New 'Toggle Bullhorn' key/button with an optional modifier key/button. This allows you to keep sounding your bullhorn without having to hold down a key/button. Works simultaneously with sirens. New 'Next Siren' key/button that cycles to the next siren. Can optionally include the Off state as a cycle stage. Your siren now stays on when you leave your vehicle and you don't mute it. This can be disabled from the GeneralConfig file. Determine the siren tone that should be playing. You are able to select which siren tone to play, including the ability to differentiate between secondary sirens. Additional Siren Modes Dual Siren Mode. Manual Siren Mode. Additional customisable sirens per vehicle model. Allows you to have up to TEN total sirens per vehicle model. Fully Functional and Customisable UI. Feel free to create and release your own custom UI files. The size and position of the UI can be customised via the UIConfig file. Customisable Siren Switching Tones (like Siren Switch Honker). Sirens are fully customisable per vehicle model via an XML file. All keybindings are customisable and fully customisable controller support is included. The vehicles.awc size and length limits are effectively removed while using Siren Mastery, allowing for greater siren variety. British Users: You can now have British Siren Switch/Toggle sounds (in other words, horns!). Simply replace the relevant files in the Plugins/SirenMastery folder with the ones included in Siren Switch Honker's download.  
Support is no longer offered - what to do if you encounter a bug or have problems:
Watch the installation video for my modifications here. Use this tool: http://www.lcpdfr.com/files/file/9755-lspdfr-troubleshooter-by-albo1125/  Read the documentation file if you're having trouble getting a specific feature to work. Suggestions can be made here. If all else fails: Please leave a comment (not a review). Include your RAGEPluginHook.log file, located in your Grand Theft Auto V folder. Also, please provide an accurate description of what happened. Please do not reupload or redistribute this without my permission, rather link back to this original page. Thank you.

decided to make a 3d impala logo as the simple 2d texture was too ugly. u can convert it to whatever use it on whatever idc.

Well, some might wonder why I decided to upload a School Bus on this site. Well, I thought this would give a good base for a prison bus or something the likes, hence why I left the model unlocked and provided a wireframe template. Unfortunately I don't have time for that, but perhaps someone is up for it.
For the model features:
-Openable bonnets, doors and stop signs
-Detailed driver interior
-Working dials
-Complete set of LOD models
-Bulletholes, dirt, glass shatter all included
-Includes model files for windshield wiper support and without

Hi there!
i'm back with a real retro project :) Hope you like it!
Every taxi stuff is authentic from the 80's made by me. I want to thank Lundy and the guys in the credits for the base Caprice model with template, it was a great starting point. The car is almost bug free, Remarks are welcome.

IMPORTANT!
If you don't edit or replace your vanilla vehicle.meta with the setting written in the readme your car will have only one paintjob! 

A simple ytd file that includes some commonly used textures that aren't included in the default ytds so you wont have those annoying errors again.
To use: add this to your preloaded pack, in your zmodeler import menu.