Could you try these?

Pierce PUC Pumper Tanker (3000 gallons of water)
========================================

25400 0.6 95 0.0 0.9 -0.35 0.5 8 0.08 1.0 90 0.3 0.50 0.1 35 0.8 2.2 5 0.09 0.3 3.5 2.5 2.5 0.5 -0.12 0.03 0.34 1.5 1.0 1.6 2.2 0.0 40000 48 300000 2

optimized for PFCBarefoot's Pierce Heavy Pumper V1.4 ELS



Pierce PUC Pumper (1200 gallons of water)
===================================

12700 0.6 95 0.0 0.0 -0.24 0.5 8 0.08 1.0 110 0.35 0.50 0.1 40 0.8 1.2 11 0.09 0.5 3.0 2.3 2.3 0.25 -0.12 0.0 0.5 1.5 1.0 1.6 2.2 0.0 40000 48 300000 2

optimized for DeathsDeciple's Fire Truck / Fire V1.1F

Could you make a handling line for a Chevy Express in BlackJesus01 LCPD car pack?

Have you tried this handling yet?

2338 0.38 80 0.0 0.07 -0.6 0.0 4 0.105 1.0 250 0.3 0.55 0.7 33.0 1.4 1.0 11 0.12 0.49 3.0 1.5 1.5 0.12 -0.08 0.0 0.5 2.0 1.0 2.3 2.5 0.0 20000 440010 0 2

It's the GMC Savana handling. They are the same vehicles, with different brands.

Could you make a handling line for a Chevy Express in BlackJesus01 LCPD car pack?

Have you tried this handling yet?

2338 0.38 80 0.0 0.07 -0.6 0.0 4 0.105 1.0 250 0.3 0.55 0.7 33.0 1.4 1.0 11 0.12 0.49 3.0 1.5 1.5 0.12 -0.08 0.0 0.5 2.0 1.0 2.3 2.5 0.0 20000 440010 0 2

It's the GMC Savana handling. They are the same vehicles, with different brands.

use that as he took the original savanna and then converted it into a express

Can you make a handling line for this dev dodge ram 3500 ambulance that is up for download. Here is the link. Thanks

http://www.lcpdfr.com/files/file/8194-dev-dodge-ram-3500-ambulance-unlocked/?tab=comments

Yes and also, it's been released on the first page.

Hey Sgt. Kanyo! Idk if there is already one, but could you make a handling line for Gangrenn's 2014 Seagrave Tower Ladder? 

This one was made for his 2013 Ferrara 100, it should work with the seagrave as well:

31200 0.5 90 0.0 0.0 -0.3 0.0 6 0.07 5.0 100 0.1 0.50 0.2 40.0 0.8 1.0 10 0.09 0.48 2.2 0.5 0.5 0.2 -0.15 0.02 0.44 1.5 0.5 2.0 2.5 0.0 40000 240048 300000 2
 

I have used every single Taurus handling on the first page and every one makes this car flip when turning. Its RoeganTV's 2013 FPI Undercover. Could you make a handling line for this so I don't flip over?

 

Could you try these?

Pierce PUC Pumper Tanker (3000 gallons of water)
========================================

25400 0.6 95 0.0 0.9 -0.35 0.5 8 0.08 1.0 90 0.3 0.50 0.1 35 0.8 2.2 5 0.09 0.3 3.5 2.5 2.5 0.5 -0.12 0.03 0.34 1.5 1.0 1.6 2.2 0.0 40000 48 300000 2

optimized for PFCBarefoot's Pierce Heavy Pumper V1.4 ELS



Pierce PUC Pumper (1200 gallons of water)
===================================

12700 0.6 95 0.0 0.0 -0.24 0.5 8 0.08 1.0 110 0.35 0.50 0.1 40 0.8 1.2 11 0.09 0.5 3.0 2.3 2.3 0.25 -0.12 0.0 0.5 1.5 1.0 1.6 2.2 0.0 40000 48 300000 2

optimized for DeathsDeciple's Fire Truck / Fire V1.1F

tried both the front end is lifted up.

This one was made for his 2013 Ferrara 100, it should work with the seagrave as well:

31200 0.5 90 0.0 0.0 -0.3 0.0 6 0.07 5.0 100 0.1 0.50 0.2 40.0 0.8 1.0 10 0.09 0.48 2.2 0.5 0.5 0.2 -0.15 0.02 0.44 1.5 0.5 2.0 2.5 0.0 40000 240048 300000 2
 

I never thought of using that line. I will do that. Thanks!

I have used every single Taurus handling on the first page and every one makes this car flip when turning. Its RoeganTV's 2013 FPI Undercover. Could you make a handling line for this so I don't flip over?

tried both the front end is lifted up.

I've just released both handlings on the front page, under 2012 Ford Police Interceptor and 2013 Pierce Arrow XT Engine.

I've just released both handlings on the front page, under 2012 Ford Police Interceptor and 2013 Pierce Arrow XT Engine.

Thanks man. 

Is there a handling line for this truck somewhere here?

Try this one:

2008 Ford F-350 Super Duty:
=======================
 
3488 0.38 80 0.0 0.1 -0.22 0.5 6 0.19 5.0 150 0.3 0.55 0.5 33 1.5 1.1 10 0.09 0.5 3.0 0.8 0.8 0.17 -0.1 0.0 0.5 2.0 1.0 1.8 2.5 0.0 49655 440010 0 0
 
optimized for gfxle's unmarked F350

Already tried that one, truck corners like its on a turntable.

Edited August 28, 201510 yr by Starmix

Sorry wrong handling, I've just realized that truck was dunkboi's base, so try this:

3107 0.38 80 0.0 0.08 -0.35 0.0 6 0.19 5.0 150 0.2 0.55 0.5 33 1.5 1.1 10 0.18 0.49 3.0 0.8 0.8 0.15 -0.1 0.0 0.5 2.0 1.0 1.5 2.5 0.0 49655 440010 0 0

If it turns slowly, that's because it's no supercar. It's a 3 tonne truck.

Hey Kanyo, can you create a line for the Ram 1500 in this pack: http://www.lcpdfr.com/files/file/7303-lcsd-truck-pack/

Yeah sure. I'll post it when I'm finished.

can you do a handling line for this cadillac escalade?

many thanks