Hi guys.

I had ELS, old version and old version of LCPD mod, today I installed latest LCPD mod and newer ELS (v7). Everything is really great, but there is one thing that bothers me, that would be emergency lights. They were well until I installed v7 and replaced visualSettings.ide or something, and now it looks like this, kinda disorted or what?

 

 

Edited July 31, 201312 yr by Skytech

In the picture it looks fine to me. I don't see any problem.

Have you tried another car maybe? Those lights can be weird

Edited July 31, 201312 yr by Foward

I tried numerous types of cars, but the same "problem". It's not only for em. lights, all lights, hazzard, tail, rear, all are glowing or what, even a taxi, I can see him on a mile glowing with commercials on top of the roof xd

Looks like a lot of bloom/corona.  Although my lights look the same during certain time cycles...I like it.  Gives the emergency lights a little more umph!

 

DrDetroit

Try changing   car.defaultlight.emissive.on      in the visualSettings

No guys, if all the lights are on the in the vehicle.ide check if at the end of police there is a "ext_all" & remove it.

Just captured another screenshot.

 

Should be:

'>

 

My:

 

I will try removing that, and report back if it stills stay bloomed.

There is no "ext_all".

 

police,        police,        car,        POLICE,        POLICE,        VEH@STD,    VEH@STD_RI1,        100,    999,        0.2345, 0.2345,        0.2,    2,    1.0    ,1,    ext_requi+ext_strong

Remove all ext_requi & into ELS.ini be sure that:

ClearRandAiExtras = on

Did all, same...

Wait a minute, maybe I got you wrong. You want to tone the bloom down or what?

Try the old visualsettings you used.

Wait a minute, maybe I got you wrong. You want to tone the bloom down or what?

 

Yes, I don't want bloom :)

Ahh then just go into visualsettings.dat & change emissive light down to what you like.

Ok, thanks. As soon as I try next time, I will report if nothing happens :)

Hey all, I just wanted to say that i didn't like the bloom on the ELS either, but adjusting the emissive levels does work and it looks great. So thanks for the the info.

Hey all, I just wanted to say that i didn't like the bloom on the ELS either, but adjusting the emissive levels does work and it looks great. So thanks for the the info.

 

Can you copy me your settings pls :)

I did something that almost made lights transparent xd

Mate just change the visual settings....

Sure thing i'd be happy to give u my settings,

 

# Other emmissive lights

car.defaultlight.emissive. on  50.00

car.defaultlight.emissive.off  0.05

car.brakelight.emissive.on    20.00

car.brakelight.emissive.off    0.05

car.middlebrakelight.emissive.on   20.00

car.middlebrakelight.emissive.off   0.05

car.reversinglight.emissive.on    5.00

car.reversinglight.emissive.off    0.10

car.extralight.emissive.on 50.00

car.extralight.emissive.off   0.05

 

 

I only changed 3 things here, i changed the "reversing light from 10.00 to 5.00"

the " car default light emissive from 150.00 to 50.00"

then the "car extra light emissive from 150.00 to 50.00"

 

Now thats how I like them, feel free to try them out..... But please make a back-up of your original just in case you don't like my settings.    GOOD LUCK I HOPE YOU LIKE THEM !!!!

 

 

Thanks :)

No problem hope it works for you....