JBin818

What's the ASI loader that comes with scripthook? Comes with the native trainer. I use simple trainer instead. And Dinput. There's a scripthookdotnet asi but that is from the dot net downloads. Just want to make sure I wasn't missing something. Everything works for me though as is.

That sounds right to me. I figured that after disabling mods folder and leaving it disabled then going into the game via GTA Launcher and it is still happening, it would have to be some file in the main game folder. Didn't think about Simple Trainer that I have. Looks like that is updated 3-4 times a years and I am about 4 behind from what it looks like. From GTA5-mods ,in the comments, the author said 7 hrs ago that he is 70 percent done, should be another day or 2. He is having a problem with the menu or something like that.

Do you have OpenIV? If so then open it and up on top where it says tools, click that and go to ASI Manager. Check if ASI Loader and OpenIV.ASI is installed. If not then click install. Try that.

Further messing around with it, it is happening to other vehicles also. So it is not just a saved vehicle at my safehouse. It is probably the type of vehicle I just happened to have saved there. I used simple trainer to spawn other vehicles and some are ok and some aren't. I make a video if you want to check out. It's on another post on this thread. I disabled mods folder (mods_), still a problem. I loaded game though GTA Launcher, still a problem. Sounds like a gameconfig problem but that is in the mod folder. Original gameconfig is still in the main directory, untouched. Confirmed Mods folder was disabled. Through GTA Launcher the Original LSPD vehicles show up. Been Off Duty this whole time so it is not something part of LSPDFR. Have a scripts folder with only Basic Cruise Control and Ambient FX so can't imagine it would be one of those. Gameconfig I updated a few days ago is from F7yo. Always been a good gameconfig. I think it's something in the game folder. Maybe SHV but I updated that. RPH updated. Increase Packfile count. Have Heap Adjuster. I'm running out of ideas.

Go into your game folder and look for RagePluginHook it is a Text Document. That is the report for the last time you played. You can upload it on here if you can't figure it out and someone here might be able to figure what the problem is.

Still have this problem. Recently updated RageNativeUI since there was a new one out. That didn't fix it. Here is a video of it. I was using Simple Trainer to spawn the cars and some were fine and others spawned me out of the vehicle and then the vehicle disappeared. You'll see in the clip. https://drive.google.com/file/d/1vb2-ODTv60LC4AWFsZA2EnTw2Ab-HpE9/view?usp=sharing

Which game config did you install? By Parks or F7yo. Parks I hear is fine but I do prefer F7YO. I just updated gameconfig by F7 and it all loads for me. Config V30.rar My HeapAdjuster I think is from FiveM Systems Division which I think is the same as Dilapidated. Dilapidated has an heapadjuster.ini that I don't have. My PackfileLimitAdjuster 1.2 is from UnknownModder. There are some files and folders in you main directory that I don't have. Wonder if one of those needs an update. I'm not sure.

Sometimes a simple Restart of your computer will fix that. I've had no lights on my ELS vehicle and I restarted it and that fixed the problem. I've read on about others who had that problem and they did the same and it fixed it. Just a Restart. Try that. If not then ok, it's some thing else.

The saved vehicle worked fine before the update. There was a minor Rage update for compatibility for vehicle gadgets it looks like. I updated that too. So I wonder if this is a Rage problem. I'll see if I can save another car (swap) and see if it is still a problem. I'll try that later.

My safe house in Vinewood Hills, I have a vehicle saved in the driveway. After this update, when I get into the vehicle, a couple seconds later it spawns me outside of the vehicle. Just outside the driver side door. I get back in and same thing happens.

Sounds like you would love this game. It is really cool playing the LEO side on a like this GTAV with the graphics GTA has. Unfortunately, that does mean a decent GPU card. Like Cyan said the Integrated Graphics aren't going to cut it. Your i3 and 1.2 GHz is weak for gaming also. Save up and shop around. There should be some great deals this time of year.

There is also a problem with the Railroad crossing gates. I never tried that barrier fix. When the train goes through the crossing, most of the time the gates would close just after the train passed. This happens in Story mode also. If you stay at that crossing the gate will go down for the next train but then never raises up after. I remember it used to work perfectly but about 4-5 years ago but after some title update it got screwed up. Before that the railroad crossing gates and all other gates worked. All gates that go into an area would open automatically coming in or going out UNLESS you are not supposed to be in there like Zancudo Base. You go there and the gate will not open, in fact a guard comes up and tells you to leave. You can still plow through it and get a 5 star warrant if you are inclined. Would be nice if all these gates worked liked they should again.

Just happen to see that on Dec. 13 there will be new title called Drug Wars. I guess we'll see how much needs to be updated. So be prepared that we may have to wait for mods to be updated in the next few days.

I think this would work. Go to your plugins folder then LSPDFR folder, then Ultimate Backup Folder, and open up Default Regions. Whatever agency your are playing, find that in that Default Regions xml file, open to Edit when you're ready to change something. I just happen to have non lethal under North Yankton as an example. <NonLethals> <NonLethal>WEAPON_STUNGUN</NonLethal> <NonLethal>WEAPON_NIGHTSTICK</NonLethal> </NonLethals> Yours probably has Stungun only. Add another line underneath and add the night stick just as you see above. You can delete the stungun if you want or leave it. When you're in game, on duty, with your partner, pull out your nightstick and your partner should do the same. It should work. Another area to look at is your Stop the Ped.ini in the Plugins/LSPDFR folder. This would be under the Realistic Weapons section so look for that. Under that section you should see something like what I copied below. Make sure WEAPON_NIGHTSTICK is in there like you see here. // STP will make sure these additional loadouts are set up during the startup. It can be more than one (comma delimited). // You may put any weapon as the additional loadouts, except for lethal handguns, rifles, shotguns, and fire extinguisher. AdditionalLoadouts=WEAPON_STUNGUN,WEAPON_FLASHLIGHT,WEAPON_NIGHTSTICK

In the GP .ini there are a few things I'm not clear on what it does. Attempt to initiate pursuit true/false. What does that do? Priority Tone. What does that do when enabled. And what is the Auto Priority Tone? Pursuit Authority enabled - true/false. What does that do? Also I thought when you request Radio Check that enables the officer check in feature every 1-5 mins. But I guess that is different. So what does radio check do? I notice after requesting it I see briefly a box with info but not sure what it means. I know Opus has a video explaining some of the settings but didn't explain these.

If you don't have a mods folder then you probably didn't install OpenIV. You don't need it when you are starting out on lspdfr but once you want to start replacing or adding vehicles and some other stuff you will need OpenIV. When installing OIV it will ask you if you want to create a mods folder if you don't have one. Say yes and it does it for you. If you don't have OIV then don't worry about it. Just do exactly what Lenny said above.

In Simple Trainer, there is a option in increase or decrease wanted level I believe it's called. I don't know the language in the video, or read it, but it did show at the beginning as he's leaving the parking, cops pointing guns at him. I think Luce is right by selecting cop to attack player to make that work. I've done that in normal game but not on duty. I would think you need to be on duty to call back up. I don't know any other way.

If I remember from 4 years ago when I got this PC and had some trouble with installing lspdfr. It turned out that McAfee was the problem. It was included on my new Dell. So i got rid of it and everything related to McAfee that I could see in Programs. For me McAfee was deleting Rage when I would try to open it to play lspdfr. So I would have to reinstall. Even when I marked it as safe I guess McAfee thought otherwise. If you have McAfee get rid of it. You just got a new Computer?

I have scripthookdotnets and it loads and works fine for me. I don't know what your problem could be.

Did you disable any anti virus programs, live scanning protection, security protection?

Yeah, I've had that same thing to in the past. I think F is a GTA setting for vehicle doors and would have to remember to disable that in GTAV Settings. I have more than a few plugins and so assigning keys gets tricky. Any that have a Menu I usually put it in the Function Keys, like Trainer is F3, Rage F4. EUP, spotlight editor, Heli Assit, Better EMS I have all assigned to Function Keys. This is the only game with mods/plugins that I've ever played that take up so much keys. I think about 95% of my keyboard has something to work the game. How do I remember all the keys? Check pic. 😆

Ok....Then I guess I didn't understand your question.

Are you referring to GP? I installed it about 3 weeks ago and I'm still learning it and trying to remember what all I can request and all the other commands and actions. I think there are a few things on the backup menu that might not be available on GP like request for Supervisor. Unless I can add that to GP somehow and a Super will show up in a specific uniform and specific vehicle that i have customized in UB/Special Units. I think there are a couple features in the UB and STP Menus that aren't available in GP. I would have to look through and see. In the meantime as I get used to GP I might find that I'm not using one or both of those other menus then I'll disable that menu. I usually don't get rid of plugins until I know for sure I'm not using them and that will happen just over time playing for me.

Let's use for example the B key for Backup. Press B only and the backup menu comes up like it should. Now I want to add a different menu from another plugin and I want to use the B key so I would have to use a modifier. Usually LCRTL ot LALT are common ones. So I'll set one of those modifier+B to bring up the other menu but the Backup menu still pops up also on top of it. The backup setting menu is for B only. Why does the backup menu still pop up even when you use a modifier? It's not just that. If I have a modifier+E for another menu the STP menu still pops up or modifier G will bring up the STP Context. When I noticed this is when I installed Grammar Police and the Interaction and Settings menus are F2/F3 but there is a Lctrl modifier. When i press modifier+F3 brings up the trainer menu and the GP. Trainer is only set for F3. So that is the problem I'm having. What can be done? Thanks