Does anyone know what to change the settings so buses will pull out of the way like normal traffic?

 

Cheers 

You can do that with some Traffic Mods like Trafficflow

 

 

Edited May 12, 201312 yr by taximan5

You can do that with some Traffic Mods like Trafficflow

 

I'm using traffic flow, but buses still won't move when sirens are on?

Ram into them.

I am not sure if this is right, but I believe that you have to be 1 car length behind it to make it move to the side of the road, but the problem is that the bus is 2 car lengths, so it won't really "detect" the sirens.

As said before, I'm not sure, it's just a theory I have.

Ram into them.

 

Suppose that is the easier way haha

 

I am not sure if this is right, but I believe that you have to be 1 car length behind it to make it move to the side of the road, but the problem is that the bus is 2 car lengths, so it won't really "detect" the sirens.

As said before, I'm not sure, it's just a theory I have.

 

I'll have a look into it 

I'm using traffic flow, but buses still won't move when sirens are on?

Buses, Dump Trucks, Delivery Vans, and PD Cruisers don't move for sirens in GTAIV.  I wish there was a script though.....

Or you can use Siren Control Tool by Moerdecki. You have to press "3" on your Numpad after you've installed it, that's the Airhorn I think (not sure sorry) and then he will move :) It works on all vehicles actually.

Or you can use Siren Control Tool by Moerdecki. You have to press "3" on your Numpad after you've installed it, that's the Airhorn I think (not sure sorry) and then he will move :) It works on all vehicles actually.

Will it work with ELS?

Will it work with ELS?

 

Sure buddy! :)

Will it work with ELS?

Due to a conflict with my simple trainer, here is my setup:

N is auto change

M is silent, but they pull over

airhorn is my middle mouse button.

 

 

[ CONTROLS ] // See 'virtual key codes' for key ID's...

 

ToggleAutoSiren = 78 // N

MuteSirenSound = 77 // M

SoundCarHorn = 4 // Middle Mouse

 

 

 

 

 

[ TIME ] // (time goes in milliseconds) Example: 1000 = 1 second

 

AutoSirenInterval = 5000 // 5 seconds

FireHornInterval1 = 5000 // 5 seconds

FireHornInterval2 = 2500 // 2,5 second

FireHornDuration = 1500 // 1,5 second

 

 

 

 

 

[ SETTINGS ] // Use: 0 - no, 1 - yes

 

EnableStatusIcons = 1 // Yes

EnableFireTruckHorn = 1 // Yes

EnablePullOverOnHorn = 1 // Yes

Edited May 12, 201312 yr by Guest

I just drive around them. 

In your vehicles.meta file, use "CTRL+F" to find "FLAG_BIG". Delete every "FLAG_BIG" you see and make sure you leave no space between the other flags and the angle brackets. All trucks, buses, and large vehicles that normally won't move over will now yield when you have lights and sirens on.