Emergency Light/Siren Issues after RDE installation

[ThinBlueNoob 1]

This is my first post, and I want to start off by saying thank you to all who contribute to this community. I recently installed LSPDFR with my GTA-V and these forums have proven to be an invaluable resource. I have been very excited to begin modding my game with new vehicles, features, etc. Of course, like many, I have run into issues and had to troubleshoot my way out of it thanks to the help and guidance from this great community. Until now, there has not been a single problem I was not able to over come by simply pursuing the threads. 

 

Keep in mind, I am very new to altering GTA V so I am hoping this issue is an easy fix for a seasoned veteran. 

 

OK! On to the issue at hand.

 

Today I decided to give RDE 3.0 a spin. I have had issues with trying to install it on-top of my current installation so I decided to just start with a clean GTA V installation + LSPDFR 0.3.1 to make sure the process went smoothly... And to my excitement, flawless installation. I followed up by adding VisualV, ScriptHookV, RadianceV, and ELS. Like a breeze! 

 

Loaded the game up. Everything looks great, especially the new emergency vehicles (Noose, Military,etc). 

 

HOWEVER! I quickly noticed many, if not most of these new emergency vehicles would not allow me to activate the Lights/Siren by using the "E" key. 

 

I have spent about 5 hours at this point messing around in OpenIV with Notepad++ looking at config files sure as "carvariations.meta" in all the DLCfolders to see if there was some command to edit. At this point, I am about as dead in the water as one can get and have resorted to reaching out to the community. 

 

The (emergency) vehicles so far that are experience issues with activating the lights and sirens seem to be most of the vehicles that do not populate in the command line. I am able to spawn the vehicle if I manually type in (ex. spawn nooseinsurgent). Although once I occupy the vehicle and press the "E" keybinding, I get nothing but the generic horn as if the game recognizes the vehicle as a Civilian. 

 

My Questions are:

 

1) How does one go about fixing the issues with Lights / Sirens on these emergency vehicles?

2) Is there someway to update the commandline settings to recognize the vehicles added by the RDE installation?

 

I greatly appreciate any input, advice or guidance. Thank you for your time.

ThinBlueNoob - FL 

[Break 978]

1) The RDE Vehicles are (I believe) all non-ELS, so maybe that's where the conflict lies.
2) those settings are not handled by the commandline.

 

How did you get RDE 3.0 to run? It doesnt support the most current version of the game.

If I was you, I'd try to remove ELS, and infact any other mod and see if that solves the problem.

[Reddington 4,447]

1 minute ago, Break said:

1) The RDE Vehicles are (I believe) all non-ELS, so maybe that's where the conflict lies.
2) those settings are not handled by the commandline.

 

How did you get RDE 3.0 to run? It doesnt support the most current version of the game.

If I was you, I'd try to remove ELS, and infact any other mod and see if that solves the problem.

 

I've never used RDE, so I could be talking out my ass with RDE being involved. Even if the vehicles aren't specifically made for ELS, they can work with ELS if the VCF is configured properly.  Though, I'm not sure if RDE is able to interact with the VCF folder.

[ThinBlueNoob 1]

7 minutes ago, Break said:

1) The RDE Vehicles are (I believe) all non-ELS, so maybe that's where the conflict lies.
2) those settings are not handled by the commandline.

 

How did you get RDE 3.0 to run? It doesnt support the most current version of the game.

If I was you, I'd try to remove ELS, and infact any other mod and see if that solves the problem.

I am actually using build 877 w/ 0.47 RPH.  I will see if removing ELS will fix the issue.  Thanks for the advice.

6 minutes ago, Kallus Rourke said:

 

I've never used RDE, so I could be talking out my ass with RDE being involved. Even if the vehicles aren't specifically made for ELS, they can work with ELS if the VCF is configured properly.  Though, I'm not sure if RDE is able to interact with the VCF folder.

I might back out of RDE if it is causing this much problems for me. 

After upgrading to RDE all local/noose swat vehicles are the preset to be the Riot Brute armored vehicle. What is kind of interesting is that, lets say for instance I call via radio for Local SWAT. The sheriff / lspd livery Riot shows up CODE 3 and allows both AI and User to activate lights. 

Now if I call for Noose Swat, the same Riot vehicle in Noose livery ( I am assuming and nearly certain it is a different vehicle filename than the local riot) shows up responding CODE 2 and does not allow either AI / User to active light / siren. 

 

This is same for the NOOSE Granger and just about any emergency vehicle I did not have prior to RDE 3.0 Install. 

 

I will say, all other mods / vehicle files that I have installed manually and not through some massive install package has worked flawlessly. 

 

As I mentioned in the previous comment, I will try to remove ELS and see what happens.... but at the moment not having high hopes. 

 

Thanks for the quick responses gentlemen. 

[Will 2,178]

This topic has been moved to the appropriate forum. Please post in the correct location in the future.

[Blake231 0]

So i'm sure this is something simple that I"m missing, but how do i see the rest of this posts in this thread. I can see that the topic was "moved".  But how do i know where so I can continue reading?

 

Thank you

[Reddington 4,447]

43 minutes ago, Blake231 said:

So i'm sure this is something simple that I"m missing, but how do i see the rest of this posts in this thread. I can see that the topic was "moved".  But how do i know where so I can continue reading?

 

Thank you

 

 

Hi there,

 

Will's post is just a notification that the entire thread was moved to a new location.  No posts have been split up, all posts that were in this thread prior to being moved are still here. :)  Since you already have a topic for your issue, as well as this thread is almost a month old, I'm going to go ahead and close it. :)  For everyone's convenience, in the future, please don't hijack someone else's support thread.  Support works out a lot better if it's just the thread creator and the helpers posting. :)

 

Thank you.

 

 

If you feel this topic has been closed in error, please report this post.