So, I have been working hard with RobertTM on his LSMPD pack. I decided that the SLR he was using, while good, was not as good as it could be...So I opened up 3dsMax, and decided to scratch build a new SLR.

Pods have been tweaked and signalmaster put in..

Scratch built MX7000. Planning different versions of it. Current setup that I am working on is the old St. Louis County Police setup...meaning 5 rotators, takedowns, and 2 amber flashers in the back of the bar....

I am still learning about the materials, but as you can see, the mirrors in the lightbar are actual mirrors, and to show the detail of the rotator assembly...

 

So...a little update. Reflectors have been adjusted, misc stuff added and carcols worked over along with the vcf. Some really cool things about this.....There are 2 different speed rotators on this bar, along with actual working intersection sweeps! The only problem with the intersection sweeps is that they only move in one direction, meaning once they move and finish, they immediately snap back to the start position. It doesn't really bug me because with everything else flashing, you hardly notice it, plus it is nice to have a environmental lit sweep that you can actually see sweep. The other problem with the sweep is since GTA pulls info on where the axis is located at, the corona actually sits behind the reflector. Again not really noticeable, unless you are really close to the bar, and looking right at the sweep.

Woah! Nice car man. Are you planning on doing a pack?

I was thinking about it....Might do St. Louis County, and surrounding municipalities. Thinking of doing one of their older unmarked cars.

looking great buddy!

1 hour ago, flwpheonix said:

I was thinking about it....Might do St. Louis County, and surrounding municipalities. Thinking of doing one of their older unmarked cars.

Great! The community deserves more vehicles to play with. Keep up the great work.

Latest update...

Updated the paint scheme to what it was in the 90s, added Extra_1 to the rotators, and added a Touchmaster.

Houston....we have hubcaps.....The materials for the lightbar, I am still not happy with. Trying to reduce the reflectivity of the lightbar glass.

New update....wiring harness wired up....

Hey guys, Jonnhy here,

im very happy to say THANK YOU to @flwpheonix for letting me show that picture and an additional Gameplay Episode Series for all of you on my YouTube Channel, stay tuned for more informations!

 

JPicture #1:

 

JVideo #1:

 

PS: I want remember that guy is very friendly, kinda and a trusted modder so, i trust him 

Edited June 23, 20178 yr by Mr.JonnhyCZG

So...little update. STLC PD is 99.9% done. Added Ballwin PD which bumps up against St. Louis County's West County district. Ballwin is about 90% done.

Next one in the pack....STL Metro PD

 

Hey,

sieht sehr gut aus, das Ganze.

Aber bitte tue mir einen Gefallen und nimm die Zeit für deine Projekte und setzt dich mit dem Modding bis ins Detail auseinander.

99 % der hier veröffentlichen Fahrzeuge sind nicht besonders gut gemacht.

Orientiere dich an Steinberg4145, Lundy, BxBugs123 und Izick.

Diese Leute haben Ahnung und wissen, wovon sie reden.

Einige versuchen hier ein Fahrzeug nach dem Anderen raus zu bringen, ohne auf Qualität zu achten.

Das mindert den Spielspaß enorm.

Ich würde ja selber auch was veröffentlichen, habe nur leider keine Zeit dafür.

Und als Deutscher stehe ich ja auch immer für Made In Germany. ; )

 

Erstens Schecter...bin kein Deutscher...Bin Amerikaner ;) Wohnt und arbeitet nur im Deutschland... ;)

 

That being said, these models do have the correct amount of detail. I have modeled these cars  based off personal experience in them. I have spent numerous hours sitting in both the St. Louis County Police cars and Ballwin PD cars. These cars did not have center consoles, laptops. etc. What you see in the pics is how they were setup in the inside. As far as the lightbars go, they are as detailed as I can possibly make them without going completely overboard in the polys. The only things that you see in the pics that were not scratchmade are the cars and spotlights. The rest were completely scratchmade by me. Once you download them, and you do not think that they are up to your standard, feel free to delete them off your hard drive. ;)

Just a quick update. Changed the way the emmisives were on the lightbar. Instead of using DRO1 I am now using DRO2.

Edited July 4, 20178 yr by flwpheonix

STL Metro PD almost done. Materials have been fixed on all cars, and correct antennas have been added. All that is left to do on the LP6000 is the alleys and takedowns.

Edited July 5, 20178 yr by flwpheonix

MO Highway Patrol.... It may look like I am using the same MX on each car (except for the LP6000) but each department's MX is different. Ballwin's bar has a red and blue flasher in front with a arrowstick in the back, and the main rotators go red-blue-red-blue with no center rotator. STL County's is only 2 amber flashers in back and have main rotators as red-red-blue-blue. MO HWP is basically a mix of the two with a arrowstick in the back, red-blue flashers in front and the main rotators red-red-blue-blue.

Edited July 5, 20178 yr by flwpheonix