So, how are the handling lines going? It's okay if you stopped on the XF-R.

Well tbh I didn't really have much time, mostly my LAPD vic took a lot of time and also I've been making handlings for chasez. I'll try to make it soon, if you still need it.

EDIT: Alright check the 3rd post, it's released there :D

Edited April 28, 201213 yr by Sgt.Kanyo

Yeah, it's okay.

Thanks though. I is be using it.

Hey Sgt.Kanyo, could you go over your handling line for Cj24's LCPD 1.5AC Tahoe? I really enjoy the model but the handling line provided with it has major suspension issues. Any bump in the road will cause it to bounce violently and if you hit a bump while making a turn its prone to tip over. I was able to tone it down only slightly by playing with the upper/lower suspension limits and suspensionraise, but not enough to make it usable.

Here's the model, Thanks!

- Handling line by Sgt.Kanyo

It might do that because of the kind of Tahoe. I guess you could try another line.

What do you mean? If that handling line wasn't made for that specific model I don't know which one it was made for as it's different from all of Kanyo's other Tahoe handling lines. That model needs a specific handling line for it to work properly

Well since nobody would use the Jaguar handling I kinda ditched it, but I made a Caprice 9C1 handling. It's in the 3rd post.

The 1991? Great. :)

Can you make a handling line for EVI's Vapid cruiser, but base it off the 97 cvpi?

c13: its the original car from game so you don't need 1 BUT he made alrewady so check first posts.

Ah yes, I made 1 for the original police cruiser, but that was based on a 1998-2010 crown vic. Anyway I can't promise anything, but I'll see what I can do.

Thanks, hope you are able to complete it!

Hey Sgt.Kanyo, could you go over your handling line for Cj24's LCPD 1.5AC Tahoe? I really enjoy the model but the handling line provided with it has major suspension issues. Any bump in the road will cause it to bounce violently and if you hit a bump while making a turn its prone to tip over. I was able to tone it down only slightly by playing with the upper/lower suspension limits and suspensionraise, but not enough to make it usable.

Here's the model, Thanks!

Hey Kanyo would you be able to do anything about the suspension on this vehicle? That'd be awesome if you could, or perhaps explain what settings are causing this behavior?

Is it any similar to this bug in the video:

If yes, then I'm afraid I can't do anything about it, because this is like one of the weirdest things in GTA IV, some people has these bouncy suspension bugs, while others never had it.

For example there's smokey's 93 Mustang, it worked perfectly fine on both smokey's and mine side, however a friend of mine had that bouncy suspension bug.

Since I can't recreate that bug I can't really do anything about it.

You should check if you have the original vehicles.ide line and actually everything original except for the handling line I gave.

If nothing works, I usually suggest making the suspension feel softer. Like it's on "4.0 1.7 1.7" right now, it should be around "2.5 1.5 1.5".

If you have a different sort of bug, it could be because the center of mass of the car is moved in zmodeler on the x / y (left and right / forwards and backwards) axis which usually messes up the handling. That's why I try to convince modders only to move it on the z coordinates (up n down).

Is it any similar to this bug in the video:

[media=]

If yes, then I'm afraid I can't do anything about it, because this is like one of the weirdest things in GTA IV, some people has these bouncy suspension bugs, while others never had it.

For example there's smokey's 93 Mustang, it worked perfectly fine on both smokey's and mine side, however a friend of mine had that bouncy suspension bug.

Since I can't recreate that bug I can't really do anything about it.

You should check if you have the original vehicles.ide line and actually everything original except for the handling line I gave.

If nothing works, I usually suggest making the suspension feel softer. Like it's on "4.0 1.7 1.7" right now, it should be around "2.5 1.5 1.5".

If you have a different sort of bug, it could be because the center of mass of the car is moved in zmodeler on the x / y (left and right / forwards and backwards) axis which usually messes up the handling. That's why I try to convince modders only to move it on the z coordinates (up n down).

Yeah thats the problem! Damn it. I got it it to be a little less bouncy by playing with Su Sl Sr and the Z axis, I'll try it out with the softer suspension settings

Edit, seemed to fix it, I also raised the Su Sl and Sr lines with it. Thanks for the help Kanyo

Edited May 26, 201213 yr by Dramacydal503

Hey Dramacydal503 could you share the modded handling I have the prob too even with Evi's demo tahoe.

2505 0.363 85 0.0 0.3 -0.44 0.5 4 0.16 5.0 240 0.48 0.55 0.6 33 1.5 1.5 13 0.12 0.48 2.5 1.5 1.5 0.2 -0.1 -0.03 0.66 2.0 1.0 2.2 2.4 0.0 50000 440010 0 0

Modified entries in bold. Oh when I say I raised Su and Sl I meant that I lowered it. I'm going to try it with the original height of Kanyo's line and see if just softening the suspension worked. It's sitting a little low, because thats how I had the line before thinking that was the issue.

Thanks!

Sgt.Kanyo: When I have that problem with one of my mods, I re-export it, and then it's solved. Seriously, it works. Mostly that bug comes once I added something, like a cage or lightbar.

Ah thanks, so it's confirmed it's the model then. I can't do anything about that, if you get that suspension bug, you guys should contact the converter.

Hey Sgt. Kanyo can I ask what part of the handling I have to change if a car flips when turning?

Thanks in advice.