i have els v8 cars and i have els v8 installed but when i turn my lights on i have no corner strobes!? do i have to enable them?

i have els v8 cars and i have els v8 installed but when i turn my lights on i have no corner strobes!? do i have to enable them?

 

In the VCF for that vehicle turn them on 

 

[ CORONAS ]

Headlights = on, 0

Taillights = off, 0

IndicatorsF = on, 0

IndicatorsB = on, 0

Reverselights = off, 0

 

In the VCF for that vehicle turn them on 

 

[ CORONAS ]

Headlights = on, 0

Taillights = off, 0

IndicatorsF = on, 0

IndicatorsB = on, 0

Reverselights = off, 0

 

 

Thank you so much! I always wondered why my strobes would flash on the ground but never apear to flash on the vehicle itself.

Thank you so much! I always wondered why my strobes would flash on the ground but never apear to flash on the vehicle itself.

 

You can also replace that "0" with "1-5" to get different paterns

MODERATOR NOTICE
Moving to GTA IV Discussion & Media.

wow thanks

I can not even get them to show up...

I can not even get them to show up...

 

If you're referring to the corona strobes from ELS v8, I think that some vehicles aren't able to show them, but I could be wrong. If I am wrong, then make sure that the car you are using is an ELS enabled car, and make sure that ELS is turned on for that vehicle. 

Every car I've downloaded so far can use the ELSv8 Coronas. I think they have something to do with the light dummies or whatever (I'm not a modeler). So as long as a vehicle has headlights, taillights, indicators and reversing lights you should be able to use them. Only the takedown coronas depend on how the model was set up.

 

Every car I've downloaded so far can use the ELSv8 Coronas. I think they have something to do with the light dummies or whatever (I'm not a modeler). So as long as a vehicle has headlights, taillights, indicators and reversing lights you should be able to use them. Only the takedown coronas depend on how the model was set up.

This is correct. The coronas flash wherever the dummy is placed. So say you enable front indicator strobes. The corona will flash wherever the indicator_lf and indicator_lr dummies are placed.