Jump to content

ENB's - Wont Stop Lagging When ELS is On...


matt411

Recommended Posts

I have tried just about every ENB and when ELS lights are on, they go really slow in certain spots on the map and it's very irritating - and I am running the game with no shadows, view / detail down to like 1-5. 1366 x 768 resolution. (It even lags still in lower res) .

 

I have the steam version of gta4 - 1.0.7.0 patch.

 

It's odd because I have a Gateway FX6860 UR10p - which is an I-7 processor. Video card is a ATI Radeon 7770- 2GB DDR5. 12 gigs of ram. 2tb HD. Power supply is 700 watts.  And yes I am running the card overclocked and enabled graphics overdrive. Unless I got totally ripped off when buying this computer I'd imagine it's fairly up there with specs - unless the card they have in here is really junk??

 

I recently updated the ATI Catylist software but it's still lagging.

 

I used to have an i-5 processor gateway. It lagged there too, but I upgraded the video card to a 1gig DDR5, can't remember the brand but it wasn't ATI Radeon. When I upgraded the game ran perfectly with no lag with ENB + els lights. (Sad I sold that computer)

 

So I guess my questions are these:

Is my graphics card and/or power supply really that crappy?

What makes an ENB lag most when ELS lights are on? I have tried turning off every antialiasing setting / etc. that could be causing the slow down in the enb.ini files.

 

Thanks, and please let me know if you need any other specs with my setup.

Link to comment
Share on other sites

Yea they haven't seemed to do anything unless theres specific paramaters I'm not including in the commandline.

 

All it does is make the game say "warning your graphic settings are too high" etc. but it shows like 500mb / 4,000mb used..??

Link to comment
Share on other sites

How long have you had this card for? Try some other games that use the GPU as much as GTA 4 does, and finally what ENBs have you tried? I recommend Savior ENB, it looks pretty awesome and doesn't use lots of resources either. 

SCNG FTW!!

 

If you would like to see my mods, please click here

 

 

AND NEVAR EVAR EVAR PM ME FOR SUPPORT (KTHNXBYE <3)

 

Link to comment
Share on other sites

I have tried just about every ENB and when ELS lights are on, they go really slow in certain spots on the map and it's very irritating - and I am running the game with no shadows, view / detail down to like 1-5. 1366 x 768 resolution. (It even lags still in lower res) .

 

I have the steam version of gta4 - 1.0.7.0 patch.

 

It's odd because I have a Gateway FX6860 UR10p - which is an I-7 processor. Video card is a ATI Radeon 7770- 2GB DDR5. 12 gigs of ram. 2tb HD. Power supply is 700 watts.  And yes I am running the card overclocked and enabled graphics overdrive. Unless I got totally ripped off when buying this computer I'd imagine it's fairly up there with specs - unless the card they have in here is really junk??

 

I recently updated the ATI Catylist software but it's still lagging.

 

I used to have an i-5 processor gateway. It lagged there too, but I upgraded the video card to a 1gig DDR5, can't remember the brand but it wasn't ATI Radeon. When I upgraded the game ran perfectly with no lag with ENB + els lights. (Sad I sold that computer)

 

So I guess my questions are these:

Is my graphics card and/or power supply really that crappy?

What makes an ENB lag most when ELS lights are on? I have tried turning off every antialiasing setting / etc. that could be causing the slow down in the enb.ini files.

 

Thanks, and please let me know if you need any other specs with my setup.

Lower your Graphics in game and Cut some Proccess you do not need while in Game.

That will Help a lot. You can also use a Game Boster Program.

 

Sergeanto!

Link to comment
Share on other sites

My graphics are as low as they can go in the game, it doesn't help.

 

I know left 4 dead 2 is older but I can run that max settings not one bit of lag even in multiplayer.

 

The game runs fine without an ENB, even most ENB are ok until I turn els lights on. I figured however with a 2gb DDR5 card and I7, nothing should lag even if its an ENB.

 

I've also tried Savior ENB and its the one I have right now, it still slows in certain spots when ELS lights are on.

Edited by matt411
Link to comment
Share on other sites

Make sure that you are running the game with the administrative rights by going to GTA IV/EFLC folder, right click on GTAIV.exe/EFLC.exe, select 'Properties' then 'Compatibility' and enable option 'Run this program as administrator', also do the same exact thing to the LaunchGTAIV/EFLC.exe (if you have Windows 8, then ignore LaunchGTAIV/EFLC.exe part).

 

Also, try to launch the game with LaunchGTAIV.exe

Link to comment
Share on other sites

AMD

 

there's your problem. They work badly with ENB

 

It's sad that my previous 1 GIG DDR5 card performed flawlessly opposed to this 2 gig DDR5. My previous card wasn't AMD either so I'm guessing that's the issue. What brand do you recommend not only for good enb performance, but for good gaming performance with all games in general? I'd like to stay around the $150 range of cards.

Link to comment
Share on other sites

It's sad that my previous 1 GIG DDR5 card performed flawlessly opposed to this 2 gig DDR5. My previous card wasn't AMD either so I'm guessing that's the issue. What brand do you recommend not only for good enb performance, but for good gaming performance with all games in general? I'd like to stay around the $150 range of cards.

 

I'm fairly certain mine was around $170 from NewEgg(Granted, this is in CAD), but I've been using the GTX 560Ti for about a year now and I've had absolutely no problems with it at all. Your computer specs nearly match mine, as I have an i7 and 16GB of ram, so I'm assuming you'd end up with the same experience overall.

 

This card has allowed me to play multiple games on high graphics settings(Skyrim, GTAIV, PayDay2, Warframe, etc) and runs moderately cool at 50c. I've also not once experienced any issues with ENBs in GTAIV, and have yet to experience any bad "city bug" or texture loss. If you're looking for a decent card I'd definitely recommend the GTX560Ti.

 

Link to comment
Share on other sites

I'm fairly certain mine was around $170 from NewEgg(Granted, this is in CAD), but I've been using the GTX 560Ti for about a year now and I've had absolutely no problems with it at all. Your computer specs nearly match mine, as I have an i7 and 16GB of ram, so I'm assuming you'd end up with the same experience overall.

 

This card has allowed me to play multiple games on high graphics settings(Skyrim, GTAIV, PayDay2, Warframe, etc) and runs moderately cool at 50c. I've also not once experienced any issues with ENBs in GTAIV, and have yet to experience any bad "city bug" or texture loss. If you're looking for a decent card I'd definitely recommend the GTX560Ti.

 

THIS

or GTX660Ti(560Ti's sucessor)

OR if you got the cash,why not get GTX780?

Link to comment
Share on other sites

I have tried just about every ENB and when ELS lights are on, they go really slow in certain spots on the map and it's very irritating - and I am running the game with no shadows, view / detail down to like 1-5. 1366 x 768 resolution. (It even lags still in lower res) .

 

I have the steam version of gta4 - 1.0.7.0 patch.

 

It's odd because I have a Gateway FX6860 UR10p - which is an I-7 processor. Video card is a ATI Radeon 7770- 2GB DDR5. 12 gigs of ram. 2tb HD. Power supply is 700 watts.  And yes I am running the card overclocked and enabled graphics overdrive. Unless I got totally ripped off when buying this computer I'd imagine it's fairly up there with specs - unless the card they have in here is really junk??

 

I recently updated the ATI Catylist software but it's still lagging.

 

I used to have an i-5 processor gateway. It lagged there too, but I upgraded the video card to a 1gig DDR5, can't remember the brand but it wasn't ATI Radeon. When I upgraded the game ran perfectly with no lag with ENB + els lights. (Sad I sold that computer)

 

So I guess my questions are these:

Is my graphics card and/or power supply really that crappy?

What makes an ENB lag most when ELS lights are on? I have tried turning off every antialiasing setting / etc. that could be causing the slow down in the enb.ini files.

 

Thanks, and please let me know if you need any other specs with my setup.

Don't Run a Dam* ENB then. IF you are wanting ELS to look Shiney or how they

look like in Life is to ONLY Change the Time Cycles and Visual Settings ONLY!!

 

Sereganto!

Link to comment
Share on other sites

  • 2 weeks later...

I ended up getting a PNY Geforce gtx 650 ... 2gb DDR5.  It helped a little and gives a little better framerate than the AMD Radeon HD7770 I had... but I am still getting framerate fluctuations in certain spots on the map. Is it normal for fluctuations to go from like 55.2 fps to 45 fps or even lower?

 

With v sync off I get anywhere from like 72 fps + but with major fluctuations down to 50 fps and screen tearing. (Fps fluctuations seem more dynamic with this turned off)

 

With v sync on, it seems to be locked at 55.2 fps and not go above that... but it does slow down to 44 fps or even lower in some spots.

 

Is there a way to "lock" the framerate so it does not fluctuate?

 

Again I'm using savior enb. game4video enb is about the same fps wise.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...