2013 Tahoe & 2018 Charger Legend Mini-pack [NON-ELS] 1.0.0

Works good, only problem for me is like the front visor lights, back window lights, and lightbar freakout, like the back window lights and visor dont work,  the lights on the lightbar are not on the car, flashing away and back, due to this I can only use the slicktop version of it, and have to deal with the right light bulbs working only on the  back lights.

3 hours ago, ZadeOfficial said:

Works good, only problem for me is like the front visor lights, back window lights, and lightbar freakout, like the back window lights and visor dont work,  the lights on the lightbar are not on the car, flashing away and back, due to this I can only use the slicktop version of it, and have to deal with the right light bulbs working only on the  back lights.

I haven't experienced this, this has to be a carcols conflict on your end.

Alright, thanks, ill look into it.

3 hours ago, MickeyJD said:

I haven't experienced this, this has to be a carcols conflict on your end.

Alright, ill check it out

Where should I install the meta files "carvariations" & "carcols" & "vehicles" ?

@Joshua Tanner

Finally a non-els tahoe with a lot of extras that I can use perfectly. Very cool, I´ve been waiting for this a long time.

Will there be a slicktop-only version too? Also multi-livery-support would be great.

And one question:

Is it possible to change the lighting slightly?

The front windshield now is configured (looking on front) RBBB and RRRB (would like to change to BBBB and RRRR)

and in the rear windshield it is (looking on back) RB and RB (would like to change to RR and BB)

If not, it´s not so bad. I´ll keep it anyways.... 🙂

nice tahoe!! love it!! would it be possible to add a deck light to the front windshield? great work!!

Edited January 7, 20206 yr by fireems68023

11 hours ago, darkblue said:

@Joshua Tanner

Finally a non-els tahoe with a lot of extras that I can use perfectly. Very cool, I´ve been waiting for this a long time.

Will there be a slicktop-only version too? Also multi-livery-support would be great.

 

And one question:

Is it possible to change the lighting slightly?

The front windshield now is configured (looking on front) RBBB and RRRB (would like to change to BBBB and RRRR)

and in the rear windshield it is (looking on back) RB and RB (would like to change to RR and BB)

If not, it´s not so bad. I´ll keep it anyways.... 🙂

 

Could you show me the issue?, it could be that the carcols where not installed correct

13 hours ago, Joshua Tanner said:

Could you show me the issue?, it could be that the carcols where not installed correct

Hey, there is no issue with it Sir. Everything works exactly as it should as shown in the pictures. I was just wondering if it´s possible to change some lights to my personal liking (like in the attached pictures). Sure I can go through all .ytd files to find out and every line of the carcols but to save hours of work I thought I just ask if it´s possible anyway and you could tell me what I have to change🙂

Sometimes changing one light has an effect to others too. Speaking of the rear lights would mean: If I would change the right light on the right LED-Bar to red, it will also change the right light on the left LED-Bar to red, so it is not possible the way I want it because they use the same texture source. That´s what I wanted to know, Sir. Maybe you could tell me.

Edited January 7, 20206 yr by darkblue

op

6 hours ago, darkblue said:

 

Hey, there is no issue with it Sir. Everything works exactly as it should as shown in the pictures. I was just wondering if it´s possible to change some lights to my personal liking (like in the attached pictures). Sure I can go through all .ytd files to find out and every line of the carcols but to save hours of work I thought I just ask if it´s possible anyway and you could tell me what I have to change🙂

Sometimes changing one light has an effect to others too. Speaking of the rear lights would mean: If I would change the right light on the right LED-Bar to red, it will also change the right light on the left LED-Bar to red, so it is not possible the way I want it because they use the same texture source. That´s what I wanted to know, Sir. Maybe you could tell me.

 

No sorry, I dont plan on going back on working on this unless there was a bug that needs to be fixed.

Edited January 8, 20206 yr by Joshua Tanner

16 hours ago, Joshua Tanner said:

op

 

No sorry, I dont plan on going back on working on this unless there was a bug that needs to be fixed.

 

Ok, I understand, I just wanted to know. Thanks for your reply.

I was able to notice some bugs if you like to fix them:

- the rear seats clip into the inner wheel well

- the rear lights in the window are floating when the trunk is open

- there is a gap between the rear bumper and the trunk interior you can look through to the ground (when trunk is open)

- texture issue in the trunk (kind of a board going from side to side)

- turn signals do not work properly

I don´t mind them, just wanted to tell.

It´s great work though, keep it up!! 🙂

Edited January 8, 20206 yr by darkblue

6 hours ago, darkblue said:

 

Ok, I understand, I just wanted to know. Thanks for your reply.

I was able to notice some bugs if you like to fix them:

 

- the rear seats clip into the inner wheel well

- the rear lights in the window are floating when the trunk is open

- there is a gap between the rear bumper and the trunk interior you can look through to the ground (when trunk is open)

- texture issue in the trunk (kind of a board going from side to side)

- turn signals do not work properly

 

I don´t mind them, just wanted to tell.

 

It´s great work though, keep it up!! 🙂

Quick question, where did you install the carcols and carvariation files?

 

Edited January 8, 20206 yr by Gary.

20 hours ago, Gary. said:

Quick question, where did you install the carcols and carvariation files?

 

Hey,

I put the carvariations into my carvariations of mpchristmas2 and added the carcols.meta files into my carcols.ymt archive

it should be correct because otherwise my lights won´t work properly

10 hours ago, darkblue said:

 

Hey,

I put the carvariations into my carvariations of mpchristmas2 and added the carcols.meta files into my carcols.ymt archive

it should be correct because otherwise my lights won´t work properly

Thanks for your information,

I know where to install the carvariations now,

but still curious about where can I find carcols.ymt,

appreciate.  

14 hours ago, Lucasfan1201 said:

Thanks for your information,

I know where to install the carvariations now,

but still curious about where can I find carcols.ymt,

appreciate.  

carcols.ymt is located in: mods(i guess you have that folder?!)/update/update.rpf/x64/data

open the carcols.ymt with OpenIV with edit and search for the term "sirens". Then put the sirensettings somewhere to the other sirens. Same goes with the lights.

Sometimes it can´t be added, I don´t know why. But OpenIV refuses to save then or reports an error. A wrong sign somewhere is enough and hard to locate. But be carefull, this requires a bit more experience than adding the carvariations. Make sure to have the exact same layout than the other sirensettings, too. It took a while for me to understand how this works. The key points are the entry and the exit lines. I recommend placing it somewhere between two existing settings so you have the same entry and exit phrases.

Shiawassee County, MI based?

On 1/11/2020 at 4:44 PM, Stryker2020 said:

Shiawassee County, MI based?

Yes

On 1/8/2020 at 12:26 PM, darkblue said:

 

Ok, I understand, I just wanted to know. Thanks for your reply.

I was able to notice some bugs if you like to fix them:

 

- the rear seats clip into the inner wheel well

- the rear lights in the window are floating when the trunk is open

- there is a gap between the rear bumper and the trunk interior you can look through to the ground (when trunk is open)

- texture issue in the trunk (kind of a board going from side to side)

- turn signals do not work properly

 

I don´t mind them, just wanted to tell.

 

It´s great work though, keep it up!! 🙂

All of those issues except the floating lights are model issues, they are not the work of Joshua Tanner. They are the work of OfficerUnderwood.

On 1/13/2020 at 2:11 AM, MickeyJD said:

Yes

 

All of those issues except the floating lights are model issues, they are not the work of Joshua Tanner. They are the work of OfficerUnderwood.

Awesome, that's my county!

These are fantastic models! Any plans to possibly turn the antenna farm on the roof of the charger into an extra so the car can truly be unmarked?

Can anyone help me get my lights working? i got the cars in fine, just their lights wont turn on

Chevy Colorado for next project