EUP Backup Configurations [9.3] 7.4.2 Hot-Fix

2 hours ago, monito202000 said:

Nothing work but... I see the "problem" and was a problem from eup.

So you were able to fix the error?

44 minutes ago, Joe C Wilson said:

So you were able to fix the error?

Nope

1 hour ago, Joe C Wilson said:

So you were able to fix the error?

Ok i have a solution, I see from EUP Discord server: (this is gonna be fixed) Step One: Load into Story Mode without ragepluginhook Step Two: Once in storymode fully launch ragepluginhook Step Three: Enjoy Decals

14 hours ago, monito202000 said:

Ok i have a solution, I see from EUP Discord server: (this is gonna be fixed) Step One: Load into Story Mode without ragepluginhook Step Two: Once in storymode fully launch ragepluginhook Step Three: Enjoy Decals

 

I heard about decals not showing due to a connection error between the game and the server before, but never to the point where uniforms were broken entirely. Glad you found the source of the issue with your game.

you can add custom uniforms right like WSP?

31 minutes ago, Rlittle2011 said:

you can add custom uniforms right like WSP?

This plugin only reads what is installed to EUP Law and Order and Serve and Rescue in OpenIV. So if you want custom uniforms you'll have to replace the preexisting uniforms in OpenIV.

When I call for SWAT reinforcements the clothing is bugged

6 hours ago, xVeKk said:

When I call for SWAT reinforcements the clothing is bugged

What department? What menu? What location?

Tried editing customregions.xml to reduce the number of agencies to the ones I want, and I keep getting an unhandled exception.

CustomRegions.xml

4 hours ago, Rizencraft said:

Tried editing customregions.xml to reduce the number of agencies to the ones I want, and I keep getting an unhandled exception.

Can you provide your RPH log by chance?

39 minutes ago, Joe C Wilson said:

Can you provide your RPH log by chance?

Here it is. RagePluginHook.log

5 minutes ago, Rizencraft said:

Here it is. RagePluginHook.log

It says a setting already exists. So double check the entire file and see if you created any settings twice. Could be regions defined twice to certain departments, or a unit specified twice, etc.

1 minute ago, Joe C Wilson said:

It says a setting already exists. So double check the entire file and see if you created any settings twice. Could be regions defined twice to certain departments, or a unit specified twice, etc.

If you're willing to do so, please look over my customregions.xml file. I've done some testing, and maybe the issue would be the zones that I added. I kept fiddling with it, but I still haven't found a solution. If I keep the zones completely blank or use the default ones, that seems to work, but I want to be able to customize things.

8 hours ago, Rizencraft said:

If you're willing to do so, please look over my customregions.xml file. I've done some testing, and maybe the issue would be the zones that I added. I kept fiddling with it, but I still haven't found a solution. If I keep the zones completely blank or use the default ones, that seems to work, but I want to be able to customize things.

I looked at your file and several of your configurations have the same jurisdictions for various units.

LSPD and SAHP have the same jurisdictions (zones) such as Richman, and Davis, also you set up LSPD and SAHP to have female local units in those jurisdictions - all within Custom Regions XML. This is likely why Custom Regions XML is crashing.

You can only set one jurisdiction per department, however, you may use the Special Units XML to create units as an add-on, without the possibility of exceeding the limit of departmental jurisdictions.

You will need to change both LSPD and SAHP and ensure both do not cover any of the same jurisdictions and then you can add female local units to the Special Units XML file.

You can take the preexisting settings from Default Regions XML, and add them to Special Units XML if you wish to have them.

There is no need to set each jurisdiction for special units, as they respond anywhere upon request.

You can also set them up to be requested during pursuits, traffic stops, felony stops, Code 2, Code 3, etc. by turning these settings to true within the Special Units XML file.

5 hours ago, Joe C Wilson said:

I looked at your file and several of your configurations have the same jurisdictions for various units.

 

LSPD and SAHP have the same jurisdictions (zones) such as Richman, and Davis, also you set up LSPD and SAHP to have female local units in those jurisdictions - all within Custom Regions XML. This is likely why Custom Regions XML is crashing.

 

You can only set one jurisdiction per department, however, you may use the Special Units XML to create units as an add-on, without the possibility of exceeding the limit of departmental jurisdictions.

 

You will need to change both LSPD and SAHP and ensure both do not cover any of the same jurisdictions and then you can add female local units to the Special Units XML file.

 

You can take the preexisting settings from Default Regions XML, and add them to Special Units XML if you wish to have them.

 

There is no need to set each jurisdiction for special units, as they respond anywhere upon request.

 

You can also set them up to be requested during pursuits, traffic stops, felony stops, Code 2, Code 3, etc. by turning these settings to true within the Special Units XML file.

I see. The reason why I decided to structure it that way is to mirror the way Jurisdictions+ does the customregion.xml, but maybe what I should've done is edit both the specialunits.xml and customregions.xml file, and not only the customregions.xml file. I'll keep what you said in mind, and then get back to you if I have any further issues, or need some clarification. Thanks for the help.

Edit: Comparing the customregion.xml files for both this mod and Jurisdictions+, I noticed that the way Jursidictions+ structures the xml file is that it makes it so that for example, LocalPatrol is made into a single thing (LocalPatrol starts and ends the whole entry), instead of it being separated into multiple LocalPatrol entries. This may be how the author for that mod makes it so female untis can be included into the customregion.xml file, without being a special unit, among other things.

Edited September 4, 20223 yr by Rizencraft

There is a option to put NYSP SWAT?

9 hours ago, monito202000 said:

There is a option to put NYSP SWAT?

I don't believe EUP has SWAT outfits for NYSP yet, no.

9 hours ago, Joe C Wilson said:

I don't believe EUP has SWAT outfits for NYSP yet, no.

Damn, thats why they respond with NYSP jacket

There is a Sandy Police?

Edited September 19, 20223 yr by monito202000

5 hours ago, monito202000 said:

There is a Sandy Police?

Sandy PD does not exist in EUP, but if you were referring to vehicles you can set up zones for them. This is an example, however you'd have to delete any existing zones containing SANDY to prevent crashing. This will also allow them to spawn ambient also. 

In regions xml make a new region as such;

Then remove SANDY from the BCSO section in that same file and then open backup xml.

In backup xml add these lines - this will allow all available backup in the zone we just created;

For Ultimate Backup its the same process, but you can use the custom regions file to setup the new zone. The original Ultimate Backup comes with documents for referencing zones also. Make sure to set up state backup, female backup, K9, SWAT , and even transport units for it too if you plan to use it.

In agency EUP you can edit BCSO to spawn Sandy PD cars or create a duplicate of the BCSO settings and name it to SSPD or something and update the agency settings again as we did here.

Edited September 19, 20223 yr by Joe C Wilson

4 hours ago, Joe C Wilson said:

Sandy PD does not exist in EUP, but if you were referring to vehicles you can set up zones for them. This is an example, however you'd have to delete any existing zones containing SANDY to prevent crashing. This will also allow them to spawn ambient also. 

 

In regions xml make a new region as such;

  Reveal hidden contents

<Region>
        <Name>SandyShores</Name>
        <Zones>
            <Zone>SANDY</Zone>
        </Zones>
    </Region>

 

Then remove SANDY from the BCSO section in that same file and then open backup xml.

 

In backup xml add these lines - this will allow all available backup in the zone we just created;

 

  Reveal hidden contents

<BackupUnits>
    <LocalPatrol>
        <SandyShores>
            <Agency>bcso</Agency>
        </SandyShores>
    </LocalPatrol>
    <StatePatrol>
  <SandyShores>
            <Agency>sahp</Agency>
        </SandyShores>
    </StatePatrol>
    <LocalSWAT>
        <SandyShores>
            <Agency>bcso_swat</Agency>
        </SandyShores>
    </LocalSWAT>
    <NooseSWAT>
        <SandyShores>
            <Agency>noose</Agency>
        </SandyShores>
    </NooseSWAT>
    <LocalAir>
        <SandyShores>
            <Agency>bcso_asu</Agency>
        </SandyShores>
    </LocalAir>
    <NooseAir>
        <SandyShores>
            <Agency>noose_asu</Agency>
        </SandyShores>
    </NooseAir>
    <Ambulance>
        <SandyShores>
            <Agency>bcfd_ems</Agency>
        </SandyShores>
    </Ambulance>
    <Firetruck>
                <SandyShores>
            <Agency>bcfd_fire</Agency>
        </SandyShores>
    </Firetruck>
</BackupUnits>

 

For Ultimate Backup its the same process, but you can use the custom regions file to setup the new zone. The original Ultimate Backup comes with documents for referencing zones also. Make sure to set up state backup, female backup, K9, SWAT , and even transport units for it too if you plan to use it.

 

In agency EUP you can edit BCSO to spawn Sandy PD cars or create a duplicate of the BCSO settings and name it to SSPD or something and update the agency settings again as we did here.

Thanks

hello i have a question since i installed this mod there are no more cops in front of the police stations even the service cars are no longer ???

16 hours ago, brock6602 said:

hello i have a question since i installed this mod there are no more cops in front of the police stations even the service cars are no longer ???

That is very odd. Do you have EUP Law and Order 9.3 and Serve and Rescue 1.5 installed? If not, that is likely the issue. This modification reads OpenIV through EUP folders to load the uniforms from the preconfigured slots. So if EUP is not installed, they won't show up as these files are only XML, and not a physical uniform mod. As for vehicles not spawning, make sure you are copying and pasting all files from the LSPDFR folder into your game folder as well.

1 hour ago, Joe C Wilson said:

C'est très étrange. Avez-vous installé EUP Law and Order 9.3 et Serve and Rescue 1.5 ? Si ce n'est pas le cas, c'est probablement le problème. Cette modification lit OpenIV via les dossiers EUP pour charger les uniformes à partir des emplacements préconfigurés. Donc, si EUP n'est pas installé, ils ne s'afficheront pas car ces fichiers ne sont que du XML et non un mod uniforme physique. En ce qui concerne les véhicules qui ne se reproduisent pas, assurez-vous de copier et coller également tous les fichiers du dossier LSPDFR dans votre dossier de jeu.

yes I have eup installed I have been playing lspdfr for a few years I have never had this problem I have installed everything correctly

37 minutes ago, brock6602 said:

yes I have eup installed I have been playing lspdfr for a few years I have never had this problem I have installed everything correctly

Hmm, can I see your rage plugin hook log? And your LSPDFR data and custom folders? You could screenshot these two if you'd like. I never heard of this before. I can take a look at your log and folders to see maybe if something is missing or isn't loading right?