-
Posts
928 -
Joined
Content Type
Forums
Gallery
Downloads
Tutorials
News Stories
Wiki
Community Guidelines
LSPDFR BOLO Series
GTA5 Native Database
GTA5 Native Parameters
Release Highlights
LSPDFR Mod Showcase
LML User Contributions
Everything posted by KN1IGHT
-
-
Yeah, you must be right After posting this topic we tried playing online again, and it worked just fine. :) He did mention when we were having connection problems, his game wasn't allowing something to completely finish, and that, that was very likely the reasons along with RockStar's servers having problems.
-
Hi guys, Last night me & a friend attempted to play online, however we were unable to connect to each other's sessions. Planning on trying to play online again tonight We mainly tried the "Invite Only Session" option, however, we both got "Unable to connect to session." We both tried sending each other invites. We can see the invites we get sent, and accept them, but cannot join each other's games. However, we can both join a public game with no problem. Any thoughts on this?
-
-
morning patrol checking for DWI
KN1IGHT commented on J.J Designs's gallery image in GTA IV Galleries
-
I've listened to a few Touchmasters and SIREN_1 sounds pretty damn similar, but SIREN_2 in the video sounds a little higher pitched then the ones I've listened to. I will continue my search, and see what I can find. Anyone else reading this topic, you are free to reply with your thoughts on what it might be as well. :) ~ KRI
-
Hi guys, I'm looking for this siren from the 2nd car in that video. I'm only looking for the WAIL & YELP tones. I think (not sure) it's a Whelen siren. Any thoughts? ~ KRI
-
I think the only Impala Hubcap out there (right now) is this one, by BxBugs Edit: I sent you a PM
-
Blue ELS Mapping to Indicator Turning Green
KN1IGHT replied to KN1IGHT's topic in GTA IV & LCPDFR Support
Thanks! It took me a few mins to find Diffuse Color, but I found it and it's no longer showing as green in zModeler! Just need to finish the model, and test it out in game! -
Blue ELS Mapping to Indicator Turning Green
KN1IGHT replied to KN1IGHT's topic in GTA IV & LCPDFR Support
I'm using emerglights_emis texture. I have checked, and the lightsemissive texture is setup correctly If it matters I'm using the emerglights_emis texture that came with Bxbugs123's Whelen Talon. -
Hi guys, I'm working in zModeler, and trying to map ELS to the front indicators on the vehicle. However, I'm getting the exact results as seen in >this topic, with the OP having the same problem. Does anyone know a fix for this? It only happens when mapping to blue ELS, but red is just fine.
-
-
Here, I will upload images of zModeler creations. Images will be uploaded regardless if it's a W.I.P. or something that's finished, and if it will be released or not. Note: In compliance with the new Gallery Rule, only W.I.P. & Finished images that will be uploaded are creations, that exported, got in game, and spawned successfully with zero errors.
-
From the album: zModeler Work
Just an Impala I made today, since I haven't done much with zModeler since my last file submission. This Impala is the Inner Edge XLP version of my Unmarked Impalas release, changed up to a marked version. I've added on the following: - Whelen Liberty by PFCBarefoot - Whelen IONs - LINZ6 Modules - Roof Antennas - Boot Antennas Note: I am well aware that the LINZ6 modules are very likely way to small. However, since this Impala wasn't based off of anything realistic, I chose to keep them the size they are.© Knight Rider - Code Two Modifications
-
From the album: zModeler Work
Just an Impala I made today, since I haven't done much with zModeler since my last file submission. This Impala is the Inner Edge XLP version of my Unmarked Impalas release, changed up to a marked version. I've added on the following: - Whelen Liberty by PFCBarefoot - Whelen IONs - LINZ6 Modules - Roof Antennas - Boot Antennas Note: I am well aware that the LINZ6 modules are very likely way to small. However, since this Impala wasn't based off of anything realistic, I chose to keep them the size they are.© Knight Rider - Code Two Modifications
-
From the album: zModeler Work
Just an Impala I made today, since I haven't done much with zModeler since my last file submission. This Impala is the Inner Edge XLP version of my Unmarked Impalas release, changed up to a marked version. I've added on the following: - Whelen Liberty by PFCBarefoot - Whelen IONs - LINZ6 Modules - Roof Antennas - Boot Antennas Note: I am well aware that the LINZ6 modules are very likely way to small. However, since this Impala wasn't based off of anything realistic, I chose to keep them the size they are.© Knight Rider - Code Two Modifications
-
From the album: zModeler Work
Just an Impala I made today, since I haven't done much with zModeler since my last file submission. This Impala is the Inner Edge XLP version of my Unmarked Impalas release, changed up to a marked version. I've added on the following: - Whelen Liberty by PFCBarefoot - Whelen IONs - LINZ6 Modules - Roof Antennas - Boot Antennas Note: I am well aware that the LINZ6 modules are very likely way to small. However, since this Impala wasn't based off of anything realistic, I chose to keep them the size they are.© Knight Rider - Code Two Modifications
-
From the album: zModeler Work
Just an Impala I made today, since I haven't done much with zModeler since my last file submission. This Impala is the Inner Edge XLP version of my Unmarked Impalas release, changed up to a marked version. I've added on the following: - Whelen Liberty by PFCBarefoot - Whelen IONs - LINZ6 Modules - Roof Antennas - Boot Antennas Note: I am well aware that the LINZ6 modules are very likely way to small. However, since this Impala wasn't based off of anything realistic, I chose to keep them the size they are.© Knight Rider - Code Two Modifications
-
Looking for DSF CVPI with no pushbar?
KN1IGHT replied to PatientMental's topic in Suggestions & Requests
You didn't really specify whether you're looking for a marked or unmarked DSF CVPI Here's 2 I released a while ago: '?do=embed' frameborder='0' data-embedContent>> However, these only have the Hubcap version of the wheels, but a texture is included to make the Hubcaps black -
2011 Dodge Ram 5500 LASD Hazmat Truck
KN1IGHT commented on Chippy's gallery image in GTA IV Galleries
-
Anyone modify their car? (Real Life)
KN1IGHT replied to Element's topic in General & Miscellaneous Discussion
2014 Ford F150 XL Regular Cab Just finished some things on it today. Has Line-X bed liner (in the bed obviously), Line-X on a front portion of the hood, Line-X along the sides as well. Looks pretty good. "Looks like a show truck" is the exact words of the gentleman who sprayed on the Line-X. Headache rack on the back, with 2 RECON 15 inch Mini LED Lightbars wired up appropriately/ differently then originally intended. (Like this except without the reverse lights, and rather then flashing half for each indicator, the whole lightbar lights up except the left, middle and right LEDs seen on in the video. All connections soldered, so no changing of the stock tail lights for me anytime soon. Headache rack was made at home, all that was bought was the square tubing for it. All wiring for rear lights were put in the headache rack, before it was welded together. Also sprayed black, with the Line-X coating. Two 4" RioRand LED Flood Lights on the heacache rack for reverse lights, wired up to a switch rather then reverse lights One 12" RioRand LED Lightbar installed in the front bumper , where the front license plate used to be, and also wired to another switch inside. Edit: Just took these on my iPhone earlier tonight. I will try get some daytime pics Should be self explanatory, how the RECON Lightbars were wired up Back-up/ reverse lights turned on, along with park lights Front lightbar turned on The front lightbar Lightbar, park lights, headlights & fog lights turned on Park lights turned on. This is how bright the RECON Bars get at a distance Had to take this one at an angle, to show what's turned on, when the park lights are activated The front lightbar, up close. -
Problem With "Extra_7" and "Extra_8" In ZModeler
KN1IGHT replied to JoshuaFrameTV's topic in Tutorials & Questions
My bad. I thought he meant the actual mirror light part (Ex: Mini LED, Whelen ION) and not the ELS -
Problem With "Extra_7" and "Extra_8" In ZModeler
KN1IGHT replied to JoshuaFrameTV's topic in Tutorials & Questions
I normally attach any mirror lights directly to the door_L0 and the door_L1, and I usually don't get any problems with crashing. If a crash/ error happens, it's something else -
Men Can't Hit Women, Agree or Disagree
KN1IGHT replied to DivineHustle's topic in General & Miscellaneous Discussion
My (KRI's) Opinion: Honestly, if there's no reason to hit the woman, then no But, if the man's life is in danger (Ex: Woman is pointing a gun or waving a knife around) then I would have to say yes. As for how hard the man would hit, depends on why he's considering/ going to hit in the first place This is my friend's opinion on this as well (almost the same as mine above): My Friend's Opinion: Honestly, if there's no reason to hit the woman, then no But, if the man's life is in danger (Ex: Woman is pointing a gun or waving a knife around) then I would have to say yes, as a "last option". By The last option thing, I mean if the man is in a situation where the woman has a weapon (knife, gun, etc.) but isn't paying attention (has her back turned) and he can safely disarm her and get the weapon away from both individuals, then okay. But if it comes to having to hit, then I have to say the man has no choice Edit: A video showing a man abusing a woman in public, and then the woman doing the same thing to the man, can be found here. Now, unfortunately the results/ reactions in that video are true. Everyone reacts to a man abusing a woman (in public), in some way, but when it's the woman abusing the man, in some way (in public) as seen in the video, no one reacts/ does anything

.png.fdab16d62ab8306ef34cec59284f4b12.png.9d5e6cf9427ad028178843acb6c725cb.png)