darkblue

@0 Venom Snake 0 I noticed a bug on the silverado. When opening the passenger door it kinda detaches when opening. It comes a bit out and then opens. Might be a model issue you cannot really do something about but I thought I just report. Car will be in my game anyway because it´s the only non-els I can use. And of course because it´s cool!

Cool ! 🙂

The model is perfect but it should have a federal signal aerodynic on top.

🤔 hm maybe I´ll give it a try. Good to gain some more knowledge about this especially when only using non-els. Thanks man!

Yep, that worked. Thank you very much. It has also a bit too much environmental lighting but I guess I can live with that. 🙂 This is freakin awesome! 👍

@0 Venom Snake 0 Very cool, finally a non-els pack with the silverado I can really use. Since the alley lights are extras, is there a way to change the carcols so they won´t light up? I don´t like them because they always turn on with the siren lights. I use it in SP as replace but couldn´t figure out which specific line to change....

Muahaha. Finally. The GMC Van is great as coroner! 👍

Very nice. The Silverado is great for Coroner use. 👍

Hey there. Mostly the uniform shirts and normal t-shirts which have the little space for the magazines in front (dunno how it´s called exactly...) And also the polo´s are clipping through, when walking on stairs. But on tighter shirts the main issue is the space in the shoulder section. It´s too narrow at the bottom and too wide on the top. It sits on the shoulders but it´s too far away from the body itself.

It looks really cool, but in my opinion it does not fit any top. Wether there is too much space in the shoulder area (front and rear) or the shirt is clipping through the back. So, sorry. Very high quality model and I´m sure it was a lot of work, but unless this won´t be fixed I´ll sadly not use it. But really good work!!

carcols.ymt is located in: mods(i guess you have that folder?!)/update/update.rpf/x64/data open the carcols.ymt with OpenIV with edit and search for the term "sirens". Then put the sirensettings somewhere to the other sirens. Same goes with the lights. Sometimes it can´t be added, I don´t know why. But OpenIV refuses to save then or reports an error. A wrong sign somewhere is enough and hard to locate. But be carefull, this requires a bit more experience than adding the carvariations. Make sure to have the exact same layout than the other sirensettings, too. It took a while for me to understand how this works. The key points are the entry and the exit lines. I recommend placing it somewhere between two existing settings so you have the same entry and exit phrases.

Hey, I put the carvariations into my carvariations of mpchristmas2 and added the carcols.meta files into my carcols.ymt archive it should be correct because otherwise my lights won´t work properly

Ok, I understand, I just wanted to know. Thanks for your reply. I was able to notice some bugs if you like to fix them: - the rear seats clip into the inner wheel well - the rear lights in the window are floating when the trunk is open - there is a gap between the rear bumper and the trunk interior you can look through to the ground (when trunk is open) - texture issue in the trunk (kind of a board going from side to side) - turn signals do not work properly I don´t mind them, just wanted to tell. It´s great work though, keep it up!! 🙂

Hey, there is no issue with it Sir. Everything works exactly as it should as shown in the pictures. I was just wondering if it´s possible to change some lights to my personal liking (like in the attached pictures). Sure I can go through all .ytd files to find out and every line of the carcols but to save hours of work I thought I just ask if it´s possible anyway and you could tell me what I have to change🙂 Sometimes changing one light has an effect to others too. Speaking of the rear lights would mean: If I would change the right light on the right LED-Bar to red, it will also change the right light on the left LED-Bar to red, so it is not possible the way I want it because they use the same texture source. That´s what I wanted to know, Sir. Maybe you could tell me.

@Joshua Tanner Finally a non-els tahoe with a lot of extras that I can use perfectly. Very cool, I´ve been waiting for this a long time. Will there be a slicktop-only version too? Also multi-livery-support would be great. And one question: Is it possible to change the lighting slightly? The front windshield now is configured (looking on front) RBBB and RRRB (would like to change to BBBB and RRRR) and in the rear windshield it is (looking on back) RB and RB (would like to change to RR and BB) If not, it´s not so bad. I´ll keep it anyways.... 🙂

make sure to have sirensettings 2 in the carvariations.meta and then set all the coronas in the carcols.ymt to 0 for this number (as DANZ described above) then it should work. or open the police3.xml and find these files: <Extra01 IsElsControlled="true" <Extra02 IsElsControlled="true" ..... and so on set every line starting with extra to "false" should also work, I think. I´m no longer using ELS so I´m not familiar with it.

Yes, it´s non els. The reason: The car has extras which will be toggled by the game. ELS uses this method too. But instead of vehicle extras it toggles the defined lights set to the car (when ELS-enabled car) That´s the reason why most ELS cars do not have many extra parts. It is limited in extras and if you have a special light setup you need every slot you have to create a unique light pattern. e.g. A ELS car has defined the blue light on the roof as extra 2. The .xml file defines the duration of the extra and the time when on and off. So it will create the "flashing" of the light. It simply toggles on and off in a defined time. Now when using a non-ELS car which has the pushbar defined as extra 2 it will toggle this in the same rythm defined in the .xml file. So it will affect the pushbar to flash. Or in this case: the ALPR. Try to locate the extras number (you can choose on and off in the police garage when using it in a normal police car slot) and simply set the value referred to this number to 0 or false in the .xml file. If you do, you can use it with ELS. Or delete the .xml file. Then it should work. The .xml file is the one in the ELS folder named by the police car slot, you are using, e.g. sheriff2.xml

Are you using this car with ELS ?

Again, very good model with accurate interior. I was waiting for this to come. The rear blue decklights need some work, they´re a bit too big. The rest is nearly perfect !!!! And the dirt needs to be done.

Stunning! This is the best FPIS I´ve ever seen on LSPDFR and it´s NON-ELS for SP and not FiveM !!! Sadly most of the Non-Els Cars are for FiveM use only but NOT this. And it works perfectly and has no bugs (at least I didn´t notice, yet). Great work !!!

@Danz Will you release these black/white livery (at least blank like in the tahoe) ??? 🙂

Excellent Model. We need more detailed non-els cars like this which are NOT for FiveM !!!