Hi there, I`m very new to game modding and got one question about the motion sequence on a bike.

Wanted this Harley Davidson FLH 1200 Police:

Edited May 16, 201411 yr by LCP4Help

What your problem is, is that you probably did the wrong vehicles.ide file. I have one for you. For every part i put car, just put the name of the model you replaced.

        Car, Car, bike, Car,ZOMB, veh@bike_chopper, NULL, 100, 999, 0.2294, 0.1987, 0, 4, 1.0, 0 noboot

You could try this tutorial, which is for the FH1200.

https://www.youtube.com/watch?v=134MdbvN1_E

 

Problem is, the other one is for another type of motorcycle so it's a bit different here and there.

You could try changing the handling line, the Harley Davidson might need a certain handling line to be able to operate properly.

 

open up your handling.dat file, find the bike that you modded and replace it's handling line with this! 

 

344.0 0.1 85 0.0 0.0 -0.15 0.0 4 0.15 1.0 310.0 0.6 0.65 0.6 33.0 1.4 1.5 15.0 0.13 0.45 4.5 3.5 3.5 0.20 -0.10 0.0 0.5 0.5 1.0 0.8 1.5 0.0 25000 440010 1 0

Edited May 16, 201411 yr by CouthInk4

Thanks a lot, appreciate your guys help! Finally it works!

 

What your problem is, is that you probably did the wrong vehicles.ide file. I have one for you. For every part i put car, just put the name of the model you replaced.

        Car, Car, bike, Car,ZOMB, veh@bike_chopper, NULL, 100, 999, 0.2294, 0.1987, 0, 4, 1.0, 0 noboot

 

Didn't work at all, bike got stuck the wrong side and wasn`t even able to get moved.

 

You could try changing the handling line, the Harley Davidson might need a certain handling line to be able to operate properly.

 

open up your handling.dat file, find the bike that you modded and replace it's handling line with this! 

 

344.0 0.1 85 0.0 0.0 -0.15 0.0 4 0.15 1.0 310.0 0.6 0.65 0.6 33.0 1.4 1.5 15.0 0.13 0.45 4.5 3.5 3.5 0.20 -0.10 0.0 0.5 0.5 1.0 0.8 1.5 0.0 25000 440010 1 0

 

Didn`t try this one. What are all these values about?

 

You could try this tutorial, which is for the FH1200.

https://www.youtube.com/watch?v=134MdbvN1_E

 

Problem is, the other one is for another type of motorcycle so it's a bit different here and there.

 

This tutorial helped me out. Just the good old copy and paste, the easy way ;)

 

Again, thank you all!

 

You have to use the handling line for that particular bike, or the ped will act as if on a crotch rocket and the bike will run/look strange.

 

Also, pstockade does not have a handling line, look in the vehicle.ide and its handling line is pointed to nstockade I believe.  You have to change this to the handling line you are using.  

 

You should use EFLC if you want a police bike, and you get two extra police car slots as well (not to mention it's a better port, much smoother game play with less tendency to crash).  Basically you get policeb, police3 and police4 in the image file with EFLC and all separate handling lines as well.  

 

EFLC lends itself to modded police bikes much better.

 

DrDetroit

 

 

DrDetroit, thanks for explanation! Bike runs smooth so far but gonna check out EFLC later on.

Edited May 17, 201411 yr by LCP4Help