Jump to content

ELS V8 Lighting color?


Go to solution Solved by cwalton311,

Recommended Posts

My apologies if this isn't in the right area, as I am having issues navigating this website.

In ELS V7 the area around my car when ELS was activated would flash with both red and blue lights. With the current set up of cars I have installed now one car has all blue primary lights. The area around my cars when ELS is on is all red. How do I change this? And can I make the area lights red/blue for some cars and just blue for others?
Thank you.

I don't have any files attached below. Again, my apologies is this isn't the right thread. 

I am running LCPDFR V1.0b and ELS v8

Link to comment
Share on other sites

You should be able to change the area flash, However i don't know how.

 

There is a user manual that came with ELS v7 that tells you how to though, so consult the manual:)

If you want to me reply as soon as possible, then either quote or @CouthInk4  me as i'll be notified, a general reply will not notify me

Check out my YouTube channel!https://www.youtube.com/channel/UCXj0EXXJfERhPJTROHY6Ma

 

Untitled.png

 

Link to comment
Share on other sites

  • Management Team

The forum is not a substitute to reading the user manual that comes with ELS. You'll specifically want to refer to sections 2.06, 3.01, 6.06, and 6.07.

Edited by willpv23

"Work and ideas get stolen, then you keep moving on doing your thing."

Link to comment
Share on other sites

The forum is not a substitute to reading the user manual that comes with ELS. You'll specifically want to refer to sections 2.06, 3.01, 6.06, and 6.07.

I am aware of that. I have already read through the under manual was looking for somebody to further help me as it did not answer my question.

No, this area is for support with the LCPDFR mod only; other issues go into GTA IV Support Requests. I'm moving this thread there now.

Thank you!

Link to comment
Share on other sites

  • Management Team

I am aware of that. I have already read through the under manual was looking for somebody to further help me as it did not answer my question.

Thank you!

  • Open default_config.ini
  • Scroll to [ ENV_LIGHT_COLORS ]
  • Change whichever extras you wish to change. Acceptable colors are RED, BLUE, EBLUE, WHITE, AMBER, GREEN, MAGENTA. Extras 1-4 are primary lights, usually the lights on the lightbar. Extras 5-6 are the warning lights, usually wig-wags/takedowns. Extras 7-9 are secondary lights, usually a traffic advisor.
  • Save as a name other than default_config, i.e. police.ini.
  • Open _SLOTCONTROL.ini
  • For the car you wish to use the configuration file you just created, i.e. [ POLICE ], change "File = default_config" to "File = [name of your file, i.e. police]"
  • Repeat for every car you wish to change
Edited by willpv23

"Work and ideas get stolen, then you keep moving on doing your thing."

Link to comment
Share on other sites

  • Solution

 

  • Open default_config.ini
  • Scroll to [ ENV_LIGHT_COLORS ]
  • Change whichever extras you wish to change. Acceptable colors are RED, BLUE, EBLUE, WHITE, AMBER, GREEN, MAGENTA. Extras 1-4 are primary lights, usually the lights on the lightbar. Extras 5-6 are the warning lights, usually wig-wags/takedowns. Extras 7-9 are secondary lights, usually a traffic advisor.
  • Save as a name other than default_config, i.e. police.ini.
  • Open _SLOTCONTROL.ini
  • For the car you wish to use the configuration file you just created, i.e. [ POLICE ], change "File = default_config" to "File = [name of your file, i.e. police]"
  • Repeat for every car you wish to change

 

Oh my gosh, thank you will! I had to repeat your steps a couple of times, but I finally got it! Thank you much!

Link to comment
Share on other sites

  • Management Team

Oh my gosh, thank you will! I had to repeat your steps a couple of times, but I finally got it! Thank you much!

 

Glad to help.

"Work and ideas get stolen, then you keep moving on doing your thing."

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...