Yeah I'm a-bit of an knob at this. Been using ELS V6 for an long time, and so I'm moving to ELS V7, and yes I have used it many times before.

 

I'll get to my point, I'm customizing my config, and I don't want to hold down "T" for the Sirens, is there away to hit an tab and the Siren stays on.   

 

 

Hello, have you read the ELS User Manual? Should tell you what to do to enable the different stages (and so the siren). 

Hello, have you read the ELS User Manual? Should tell you what to do to enable the different stages (and so the siren). 

 

ELS ABBREVIATIONS.......  

 

HDSF: Hands-free siren mode.

SRN: Siren.

STBY: Standby siren mode.

MAN: Manual siren tone.

 

At the moment mine is set to norm

 

 

Edited February 24, 201412 yr by Empire

I believe you have to press J three times to activate the various lightning stages and then press H or G (I do not personally use ELS, so not 100% sure). 

I believe you have to press J three times to activate the various lightning stages and then press H or G (I do not personally use ELS, so not 100% sure). 

 

That is correct, It does not change for me.. I want to have "G" instead of "H" and I have disable my trainer. and I want to have the settings so that I don't have to turn on the lights to get the sirens on.

 

Here are my settings

 

CRUISE ]

DisableAtLstg3 = on

UseExtra1 = on

UseExtra2 = off

UseExtra3 = off

UseExtra4 = on

[ SOUNDS ]

HRN_Type = hdsf

HRN_SrnToneForMan2 = yelp

SRN_ResetSrnTone = on

SRN_AllowToneYelp = on

SRN_AllowToneAlt1 = on

SRN_AllowToneAlt2 = on

[ WRNL ]

Type = strb

UseScnNotTkd = off

ForcePatForLstg = off

PatId_Lstg2 = 0

PatId_Lstg3 = 0

[ PRML ]

Type = leds

ForceDfltPat = off

DfltPatId = 0

ExpressModeRandPat = off

ForcePatForSrnTones = off

PatId_Yelp = 0

PatId_Alt1 = 0

PatId_Alt2 = 0

[ SECL ]

Type = leds

DisableAtLstg3 = off

ForcePatForLstg = off

PatId_Lstg1 = 0

PatId_Lstg2 = 2

PatId_Lstg3 = 3

 

And in the ini

[ CONTROLS ]

Toggle_LSTG = 74 // J by default

Toggle_SECL = 75 // K by default

Toggle_WRNL = 76 // L by default

Toggle_SRN = 72 // G by default

Toggle_InfoPanel = 77 // M by default **

Toggle_Hazlights = 0 // Nothing/disabled by default **

Toggle_Takedowns = 221 // ] by default

Toggle_Cruise = 219 // [ by default

Chng_Pat_PRML = 85 // U by default *

Chng_Pat_SECL = 73 // I by default *

Chng_Pat_WRNL = 79 // O by default *

Horn_Manu = 84 // T by default

Horn_Airh = 89 // Y by default

FunctionKey = 18 // Alt by default ***

ComboKey = 17 // Ctrl by default

ToggleExpressMode = 8 // Backspace by default **

 

That is correct, It does not change for me.. I want to have "G" instead of "H" and I have disable my trainer. and I want to have the settings so that I don't have to turn on the lights to get the sirens on.

 

Here are my settings

 

Do you mean you want the siren and the lights to turn on with a single button push? For that, you need to activate express mode. The key binding is in the ini. You might need to change it to something other than backspace (the default) - that key didn't work at all for me. After you activate express mode, you just need to press your GTA IV siren key to activate the siren and the lights.

Do you mean you want the siren and the lights to turn on with a single button push? For that, you need to activate express mode. The key binding is in the ini. You might need to change it to something other than backspace (the default) - that key didn't work at all for me. After you activate express mode, you just need to press your GTA IV siren key to activate the siren and the lights.

 

I just only want "g" tab instead of 'H" tab, but it seems it does not work for me, I'll try express mode