ltstern

You have to run the Steam EXE as admin and set everything to LOW with modded cars. Each time a 4MB+ car spawns, the graphic memory gets sapped up. Its also good to check your hard drive paging file for what folder GTAIV is installed on. If there isn't more than 2 GB virtual memory, GTAIv will start eating into main memory and cause a crash. I was getting full blue screen crashes until I changed the paging file and cleaned up my hard drive

SO I've tried almost every trick there is to get the memory bug out of LCPDFR with steam and had no luck. until I tried this combo. Im using a 4GB gtx 460 card with this setting. Use the number with how many gig video mem you have. I was able to play for 2 hours with no crash and no memory leak with all high poly modded cars. The eventual problem came with the stop spike script not LCPDFR here's my code that has worked the best Go into properties and launch options, copy and paste -availablevidmem 4.0 -norestrictions using nomem restrictions didnt work for me, it just maxed out until it crashed. But for some reason these two together make it more stable then I've ever experienced. Hope this helps someone

Can you make a wrap around unmarked with black rims, same lighting as the other unmarked... like a sergeants car. Also code 2 or lstg 2 on patrol unit has mirror beams, grills and one red and blue blue lighthead on light bar activated in front, the rear facing is correct... sort of.. code 1 or traffic control is only rear facing lights activated PPB motor pool is designated by C-central SE-southeast N-north and theres trimet police. The cars reflect their districts Great job none the less

Go into the Bios Setup and enable plug and play. If you have win 7 it should automatically detect the new card and use system drivers for it until you get the right ones

Ive been checking the log files in LCPDFR. It seems to crash every time an audio file is not found at different streets, or areas that the dispatcher calls out. I can't get backup to arrive with out crashing right when the call goes out. Cant get prisoner transport either. Other then that, its great Im using ELS and vehicle mods with VdH scripts. and Help? [iNFO - 9:11:32 PM] [Log] Started [iNFO - 9:11:32 PM] [Main] Main: Initializing... [iNFO - 9:11:32 PM] [Main] Main: LCPDFR Engine © 2011-2013 LMS [iNFO - 9:11:32 PM] [Main] Main: DO NOT USE THIS WITHOUT PERMISSION. YOU MAY NOT SHARE, MODIFY OR DECOMPILE THIS FILE. [iNFO - 9:11:32 PM] [PluginManager] Initialize: Loading custom plugins [WARNING - 9:11:32 PM] [settings] ReadSettings: Invalid entry [iNFO - 9:11:32 PM] [settings] ReadSettings: Suspect transporter POLICE [iNFO - 9:11:32 PM] [settings] ReadSettings: Suspect transporter POLICE2 [iNFO - 9:11:32 PM] [settings] ReadSettings: Suspect transporter PSTOCKADE [WARNING - 9:11:32 PM] [settings] ReadSettings: Invalid entry [WARNING - 9:11:32 PM] [settingsFile] GetValue: Value not found: UsingPoliceStationMod (Main) [iNFO - 9:11:32 PM] [Main] Main: Initializing done [iNFO - 9:11:32 PM] [serverCommunication] InitializeConnection: Internet connection available [iNFO - 9:11:34 PM] [stats] CollectSystemInformation: Server stats updated [iNFO - 9:11:54 PM] [serverCommunication] InitializeConnection: Public IP Address is: [WARNING - 9:11:54 PM] [serverCommunication] InitializeConnection: Couldn't reach server [WARNING - 9:11:54 PM] [serverCommunication] InitializeConnection: Failed to connect to the LCPDFR server. Multiplayer is deactivated [iNFO - 9:11:54 PM] [NetworkManager] NetworkManager: In network session: False Is host: False [iNFO - 9:11:54 PM] [Authentication] Authentication: Server not available, trying to authenticate offline [ERROR - 9:11:54 PM] [Authentication] Authentication: Authentication failed. Couldn't reach server or no valid lease available [iNFO - 9:11:54 PM] [Authentication] Authentication: User is in offline mode [WARNING - 9:16:09 PM] [scenarioCopPullover] Initialize: Failed to create driver [WARNING - 9:17:46 PM] [ContentManager] AddPed: Ped already has a non-default content manager. It's recommended to properly reset the content manager, before changing [WARNING - 9:24:48 PM] [scenarioDrugDeal] Process: Peds have been disposed during scenario [WARNING - 9:29:52 PM] [script.CalloutManager] Failed to free callout properly: DrunkDriver [WARNING - 9:32:55 PM] [ContentManager] AddPed: Ped already has a non-default content manager. It's recommended to properly reset the content manager, before changing [ERROR - 9:36:16 PM] [] Error while processing script: Frisk: Invalid call to an object that doesn't exist anymore! at GTA.Ped.get_isAliveAndWell() at freval_211.eval_fr54() at freval_295.Process() at LCPD_First_Response.Engine.Scripting.Plugins.ScriptManager.Process() [WARNING - 9:36:16 PM] [] Failed to free script properly: Frisk [WARNING - 9:36:24 PM] [AudioHelper] formattedStreet President_Ave [WARNING - 9:36:24 PM] [AudioHelper] audioFilePath d:Program Files (x86)Grand Theft Auto IV - Episodes From Liberty CitylcpdfrAudioPoliceScannerStreetsPRESIDENT_AVE.wav [WARNING - 9:36:24 PM] [AudioHelper] streetName President_Ave [WARNING - 9:39:23 PM] [soundEngine] PlayExternalSound: IO error while opening wave stream from d:Program Files (x86)Grand Theft Auto IV - Episodes From Liberty CitylcpdfrAudioPoliceScannerRANDOMCHAT_06.wav. File already in use? [WARNING - 9:50:37 PM] [AudioDatabase] GetAudioFileForAction: No file found for: HEMATITE_ST [ERROR - 9:50:38 PM] [Main] CRITICAL ERROR DURING MAINLOOP! REPORT THIS ISSUE AT LCPDFR.COM BY INCLUDING THIS LOGFILE. [ERROR - 9:50:38 PM] [] System.InvalidCastException: Unable to cast object of type 'freval_77' to type 'freval_89'. at freval_238.eval_fr0(freval_81 A_0, Boolean A_1) at freval_53.eval_2.eval_fr0() at freval_53.eval_2.eval_fr0(Object[] A_0) at LCPD_First_Response.Engine.Timers.DelayedCaller.fr0() at LCPD_First_Response.Engine.Main.fr2() Log started on: 21:11:32 12-29-2013 ------------------------ [iNFO - 21:11:32] Gameversion - 1.1.2.0 [iNFO - 21:11:32] XLiveLess present - skipping xlive changes [iNFO - 21:11:32] AdvancedHook 0.28 © 2010-2013 LMS - Initialized [iNFO - 21:11:32] Permission granted for LCPDFR only [iNFO - 21:11:32] Thanks to listener, aru and #iv-modding [iNFO - 21:11:32] Attaching exception handler... [iNFO - 21:11:32] Exception handler attached [iNFO - 21:11:32] Patching game functions... [iNFO - 21:50:38] An exception occured [iNFO - 21:50:38] Process: F10000 Address: 7541C41F (lèv) Code: E0434352 Registerdump - EAX: 5559E580 EBP: 5559E5D0 EBX: 5 ECX: 5 EDI: 1 EDX: 0 EIP: 7541C41F ESI: 5559E640 ESP: 5559E580

http://www.4shared.com/rar/NjTDU0-0/portland_police_cvpi.html http://www.youtube.com/watch?v=-VrcG3LSYys&feature=share&list=UUk5u6Bp3H88qs1Ei_XtRiRA&index=9

download http://www.4shared.com/rar/NjTDU0-0/portland_police_cvpi.html? RamBar is there unlocked, I made the 2009-2011 car, they have updated things a little

Dont know if this has been posted, but somehow separating the siren and light controls while you are typing info in the MDT would be great. its very messy during traffic stops

Updated with Oregon State Police Skin by RidgeRunner http://www.youtube.com/watch?v=UcJ76dqQ-Dw

read the zmodeler tutorials put out on the site by Oleg, he is the master of it and all modding. Also search the zmodeler forums alot for specific questions. For beginner, you need to go through playing with a stock GTA car to get how everything works. Import export play in game ect, see what effects things have.

[REL] Sheriff Buffalo Patrol ELS 2.0 features Go Rhino Pushbar by Bx Bugs All other parts made my me and Rockstar Games. Features Halogen Flash emulation for rear caution lights ELS settings ; [ FBI ] Active = 1 Halogen_Only = 0 Color_Light1L = 1 Color_Light2L = 0 Color_Light3R = 1 Color_Light4R = 0 Color_Light7L = 1 Color_Light8C = 0 Color_Light9R = 0 Offst_SLights = 0 Spotlight settings [FBI] spot-x=-0.8 spot-y=+0.9 spot-z=+0.5 http://youtu.be/ZMnMJYCHixE DOWNLOAD http://www.4shared.c...alo_20ELS.html?

best mod in a long long time My sheriff buffalo / default buffalo settings [FBI] spot-x=-0.8 spot-y=+0.9 spot-z=+0.5

hmmn, thanks kevin, learn a new one everyday

your dummy's are in the wrong position (probably got moved too low..)?. import the stock CVPI again with the extra parts you created detached, then reattach, and exprt