ELS Setup in zmodeler.

Here are some simple steps for ELS setup.

Extra_1 (Primary Flash) Color- Usually blue

Extra_2 (Secondary Flash) Color- Usually red

Extra_3 (Secondary Flash) Color- Usually blue

Extra_4 (Primary Flash) Color- Usually red

Extra_5 (Wig_wag 1) [ will activate to take-down 1) Color- Usually white

Extra_6 (Wig_wag 2) [ will activate to take-down 2) Color- Usually white

Extra_7 (Traffic Advisor 1) Color- Usually orange/yellow

Extra_8 (Traffic Advisor 2) Color- Usually orange/yellow

Extra_9 (Traffic Advisor 3) Color- Usually orange/yellow

Dummy Primaritives

(Extra_1) Size 0.04 Scaled on X-Y-Z axis.

(Extra_2) Size 0.04 Scaled on X-Y-Z axis.

(Extra_3) Size 0.04 Scaled on X-Y-Z axis.

(Extra_4) Size 0.04 Scaled on X-Y-Z axis.

(Extra_5) Size 0.04 Scaled on X-Y-Z axis.

(Extra_6) Size 0.04 Scaled on X-Y-Z axis.

(Extra_7) Size 0.04 Scaled on X-Y-Z axis.

(Extra_8) Size 0.04 Scaled on X-Y-Z axis.

(Extra_9) Size 0.04 Scaled on X-Y-Z axis.

Extra_1 Should consist of, Extra_1_L0 & Extra_1_L1

Extra_2 Should consist of, Extra_2_L0 & Extra_2_L1

Extra_3 Should consist of, Extra_3_L0 & Extra_3_L1

Extra_4 Should consist of, Extra_4_L0 & Extra_4_L1

Extra_5 Should consist of, Another Dummy named Extra5, size should be 0.02 scaled on X-Y-Z axis. Extra5 Should consist of L0 & L1 also.

Extra_6 Should consist of, Another Dummy named Extra6, size should be 0.02 scaled on X-Y-Z axis. Extra6 Should consist of L0 & L1 also.

Extra_7 Should consist of, Extra_7_L0 & Extra_7_L1

Extra_8 Should consist of, Extra_8_L0 & Extra_8_L1

Extra_9 Should consist of, Another Dummy named Extra9, size should be 0.02 scaled on X-Y-Z axis. Extra9 Should consist of L0 & L1 also.

(If no second dummy is added to Extra5,6,9 They will mostly likely not flash, or will be darker then the rest)

Example, I did not have L1's but make sure you create them. (Hope this helped)!