2013+ Taurus and Explorer with Valor light-bar and a ram-bar.

Hello!

My name's Slimjim98, you can call me Slim for short.  My police department recently bought some new cruisers.  They recently purchased one Ford Police Interceptor Sedan (Taurus) and one Police Interceptor Utility (Explorer).  They use Ford's white and black police paint scheme.  I'm looking for someone to create the two based off this picture.  It's not the best, but it's the only one out there so far.  I've yet to see one come by, so I haven't been able to take a picture of it myself.   http://www.gannett-cdn.com/-mm-/1c37c409874c24fa48e371404c811cefa97ee36a/c=216-0-3672-2592&r=x404&c=534x401/local/-/media/2015/07/24/Clarksville/B9318205692Z.1_20150724121319_000_GK7BEHJ8M.1-0.jpg

http://www.clarksvilleevents.com/wp-content/uploads/2014/08/21-DSC_3873.jpg         

http://images53.fotki.com/v1609/photos/4/49373/1859178/cnpca15480-vi.jpg

It has a Federal Signal Valor light-bar, which is all blue.  The front bumpers have a unit number, which is four digits in this case.  The rear says "ClarksvillePD.org".  And it too has the unit number.  On the left side of the rear is says "Emergency" with "Call 911" on the right side.  All of the others that aren't black and white are the current cars.  The rear and front are the same, they just use Ford's black and white paint scheme.  Everywhere there is text on there, it's on the new one.  I.e.  the front and side unit numbers and the badge.  If you care to help me out and make these based on the first picture, I would really appreciate it.  If you have any problems or questions, let me know and I'll answer them to the best of my knowledge.