Jump to content

weird thing in LCPDFR


avsports23

Recommended Posts

  • Community Team

Using a Car mod In Police 1 or Police 2?, Patrolling with a Modded Police Car Etc?

Also, You could just simply use a traffic mod like (My personal Favorite) Traffic Load: http://www.gta4-mods...afficload-f9780

Or something Like Traffic FLOW V5 R2:

PS: Isint Really cause by LCPDFR, Most of the time (if you have any) This is caused by High Poly Car Mods, Which, The game loads, But due to all the high polys, The game Allocated memory gets taken up by a simple car, When this happens, The game engine freaks out, Thus spawning a shit ton of taxis, Nothin you can really do about it unless you either A. Remove the cars, or B. use a traffic mod.

Edited by JAM-Justin35

Help us, help you!

  • Report Rule Breakers and other issues you see!

-JAM, Community Team Moderator.

Link to comment
Share on other sites

Do you have Traffic Flow yet? I thought I saw you did........This seems like from High-poly cars like JAM said. I saw your last video, and you had a modded car, maybe a few more...that could be the cause....

[center][size=1][img]http://i850.photobucket.com/albums/ab69/tony900000/Mobile%20Uploads/Firebuff-x920-sig.gif[/img][/size][/center] [center][color=#0000ff][size=3][font=tahoma, helvetica, arial, sans-serif]WinRar Download[size=2] (For Extracting Files)[/size]:[size=4] [/size][/font][/size][/color][size=4][url="http://www.rarlab.com/download.htm"][color=#ff0099]Click Here[/color][/url][/size][/center] [center][size=3][color=#0000ff]SparkIV Download: [/color][url="http://www.gtainside.com/en/download.php?do=comments&cat=326&id=28310"][color=#ff0099]Found Here[/color][/url][/size][/center] [center][color=#008000][i][b][size=3]Look Sharp, Act Sharp, Be Sharp - Officer Ben Sherman (Southland)[/size][/b][/i][/color][/center]

Link to comment
Share on other sites

I have one modded car -- the one you see in my on patrol day 2 video. But when i start patrol its fine, the later on its bad. I tried the traffic things but they didnt seem to do anything. Maybe I didnt put them in the right folder. I am supposed to put them in the EFLC folder, right? Or does it go in th scripts folder...

thanks :D

Link to comment
Share on other sites

  • Community Team

I have one modded car -- the one you see in my on patrol day 2 video. But when i start patrol its fine, the later on its bad. I tried the traffic things but they didnt seem to do anything. Maybe I didnt put them in the right folder. I am supposed to put them in the EFLC folder, right? Or does it go in th scripts folder...

thanks :D

If your using Traffic Flow, Place it in scripts, Traffic LOAD goes into your main directory.

Help us, help you!

  • Report Rule Breakers and other issues you see!

-JAM, Community Team Moderator.

Link to comment
Share on other sites

Ahaha, yeah, that's maybe while the game wasn't loading the cars.

[center][size=1][img]http://i850.photobucket.com/albums/ab69/tony900000/Mobile%20Uploads/Firebuff-x920-sig.gif[/img][/size][/center] [center][color=#0000ff][size=3][font=tahoma, helvetica, arial, sans-serif]WinRar Download[size=2] (For Extracting Files)[/size]:[size=4] [/size][/font][/size][/color][size=4][url="http://www.rarlab.com/download.htm"][color=#ff0099]Click Here[/color][/url][/size][/center] [center][size=3][color=#0000ff]SparkIV Download: [/color][url="http://www.gtainside.com/en/download.php?do=comments&cat=326&id=28310"][color=#ff0099]Found Here[/color][/url][/size][/center] [center][color=#008000][i][b][size=3]Look Sharp, Act Sharp, Be Sharp - Officer Ben Sherman (Southland)[/size][/b][/i][/color][/center]

Link to comment
Share on other sites

  • Community Team

lol probably. so anywhere in scripts? or a certain place?

Nope, just throw the two files into it.

Help us, help you!

  • Report Rule Breakers and other issues you see!

-JAM, Community Team Moderator.

Link to comment
Share on other sites

Wait what? What do you mean just throw it into place? TrafficFlow is into your Scripts. And TrafficLoad is into your Directory. It's what Justin posted above.

[center][size=1][img]http://i850.photobucket.com/albums/ab69/tony900000/Mobile%20Uploads/Firebuff-x920-sig.gif[/img][/size][/center] [center][color=#0000ff][size=3][font=tahoma, helvetica, arial, sans-serif]WinRar Download[size=2] (For Extracting Files)[/size]:[size=4] [/size][/font][/size][/color][size=4][url="http://www.rarlab.com/download.htm"][color=#ff0099]Click Here[/color][/url][/size][/center] [center][size=3][color=#0000ff]SparkIV Download: [/color][url="http://www.gtainside.com/en/download.php?do=comments&cat=326&id=28310"][color=#ff0099]Found Here[/color][/url][/size][/center] [center][color=#008000][i][b][size=3]Look Sharp, Act Sharp, Be Sharp - Officer Ben Sherman (Southland)[/size][/b][/i][/color][/center]

Link to comment
Share on other sites

  • Community Team

Wait what? What do you mean just throw it into place? TrafficFlow is into your Scripts. And TrafficLoad is into your Directory. It's what Justin posted above.

Err, Im not really sure what aspect your speaking to, So I'll reply to both,

He was speaking of where to place Traffic flow if im not mistaken, I don't think he was even attempting to use Traffic Load,

When I stated throw the two files into it, I meant throw the two Traffic Flow Files into scripts due to him asking "lol probably. so anywhere in scripts? or a certain place?"

Help us, help you!

  • Report Rule Breakers and other issues you see!

-JAM, Community Team Moderator.

Link to comment
Share on other sites

Err, Im not really sure what aspect your speaking to, So I'll reply to both,

He was speaking of where to place Traffic flow if im not mistaken, I don't think he was even attempting to use Traffic Load,

When I stated throw the two files into it, I meant throw the two Traffic Flow Files into scripts due to him asking "lol probably. so anywhere in scripts? or a certain place?"

should I put them into the "scripts" folder, or the "lcpdfr" folder in the "scripts" folder?

Link to comment
Share on other sites

  • Community Team

should I put them into the "scripts" folder, or the "lcpdfr" folder in the "scripts" folder?

As stated above,

If your using TRAFFIC LOAD, Place in your MAIN DIRECTORY.

If your using TRAFFIC FLOW, Simply Place in your SCRIPTS FOLDER, No, Do not place them in your LCPDFR Folder, Just your scripts...

Help us, help you!

  • Report Rule Breakers and other issues you see!

-JAM, Community Team Moderator.

Link to comment
Share on other sites

Err, Im not really sure what aspect your speaking to, So I'll reply to both,

He was speaking of where to place Traffic flow if im not mistaken, I don't think he was even attempting to use Traffic Load,

When I stated throw the two files into it, I meant throw the two Traffic Flow Files into scripts due to him asking "lol probably. so anywhere in scripts? or a certain place?"

Ohh lol. Yeah, I was confused by that too.

So, looks like you'll be using TrafficFlow. That goes into your Scripts folder. Put the 2 files of TrafficFlow, and Trafficflow.net.dll into there.

Edited by Sharp-

[center][size=1][img]http://i850.photobucket.com/albums/ab69/tony900000/Mobile%20Uploads/Firebuff-x920-sig.gif[/img][/size][/center] [center][color=#0000ff][size=3][font=tahoma, helvetica, arial, sans-serif]WinRar Download[size=2] (For Extracting Files)[/size]:[size=4] [/size][/font][/size][/color][size=4][url="http://www.rarlab.com/download.htm"][color=#ff0099]Click Here[/color][/url][/size][/center] [center][size=3][color=#0000ff]SparkIV Download: [/color][url="http://www.gtainside.com/en/download.php?do=comments&cat=326&id=28310"][color=#ff0099]Found Here[/color][/url][/size][/center] [center][color=#008000][i][b][size=3]Look Sharp, Act Sharp, Be Sharp - Officer Ben Sherman (Southland)[/size][/b][/i][/color][/center]

Link to comment
Share on other sites

alright did that. seems to be working!

next thing on my list...i got the indicator thing, but i dont know which keys to turn left and right, and i know it says the keys in the .ini thing but I don have any ".ini" thing. So can someone tell me the default keys?

Link to comment
Share on other sites

Really, just read the readme file and that should really helps. Read that first, and if you don't get it, then start posting....

[center][size=1][img]http://i850.photobucket.com/albums/ab69/tony900000/Mobile%20Uploads/Firebuff-x920-sig.gif[/img][/size][/center] [center][color=#0000ff][size=3][font=tahoma, helvetica, arial, sans-serif]WinRar Download[size=2] (For Extracting Files)[/size]:[size=4] [/size][/font][/size][/color][size=4][url="http://www.rarlab.com/download.htm"][color=#ff0099]Click Here[/color][/url][/size][/center] [center][size=3][color=#0000ff]SparkIV Download: [/color][url="http://www.gtainside.com/en/download.php?do=comments&cat=326&id=28310"][color=#ff0099]Found Here[/color][/url][/size][/center] [center][color=#008000][i][b][size=3]Look Sharp, Act Sharp, Be Sharp - Officer Ben Sherman (Southland)[/size][/b][/i][/color][/center]

Link to comment
Share on other sites

Don't mean to hijack a thread but

TrafficFlow r5v2

TrafficLoad

and one other i cannot remember

Now TrafficFlow r5v2 is nice but you only have 20 cars you can put in there. TrafficLoad I have never used before and the 3rd one i cannot remember made all my textures disappear if i panned my camera too fast. I also tried to use traffic flow and the 3rd one together and it was the same thing.

So my question is will trafficload cause texture loss and does it spawn all cars?

Visit me on youtube. The most common reason for crashing is user error. Make sure you have the latest RAGE, ScripthookV, ScripthookVdotnet and turn off your antivirus. Make sure you have an up to date gameconfig.xml as well. Use Allbo's plugin troubleshooter to find any errors too. 


 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...