I am having issues involving stopping specific blipped vehicles. My lspdfr key.ini file registers to "A" on the controller to pull vehicles over however most of the time I attempt this I am presented with the message as seen in the screenshot. Pulling over vehicles seem to work very rare but it does work sometimes when I press "A" on the controller and the message changes as the proper keys assigned. When following the message however, and pressing left stick on the controller it does not work the vehicle that is meant to be pulled over just continues driving in a straight path until it crashes.

I am using ELS for my lighting system 

Any help is appreciated, thank you.

It's "A" on a XBOX Controller by default.
If you did not change it in your keys.ini, it's going to be "A" despite that message. I've gotten that myself too.

 

For ELS you need to be in Stage 3 to pull them over.

Thank you when I am next on lspdfr I will ensure that I am at stage 3 els before pulling vehicles over and see if the problem ensues still. 

The problem is still reoccurring when pressing LShift or A on the Xbox controller to initiate the traffic stop and when pressing left stick the vehicle continues driving in a straight path until it crashes

You need to turn off Traffic Control in the ELS.ini.

Does not work still. Should I just try a fresh reinstall?

I just found it it only occurs with my "POLICE3" slot all other els vehicles work just fine when performing traffic stops

You may want to check the police3.xml and link the car you are using with it. 🙂

POLICE3.xml <--- ELS of POLICE3

 

Los Santos Police Mega-Pack [ELS] - Page 4 - Vehicle Models - LCPDFR.com<---CAR PACK 

 

"2013 FPIU Marked" is the vehicle I have for the slot 

Edited December 6, 20205 yr by Brian292948