So the local PD here has a a lightbar very common to the whelen liberty...only thing is, instead of it being clear, the glass/plastic is blue and red. Im not really sure how I could change the color of the glass/plastic in zmodeler, especially if its blue and red lol any ideas?

http://www.google.com/imgres?q=Altamonte+Springs+Police+cars&hl=en&biw=1280&bih=621&tbm=isch&tbnid=oCPEDNGzacLdXM:&imgrefurl=http://www.wftv.com/news/news/gunfire-reported-outside-altamonte-springs-bar/nJrmM/&docid=wlemOqECAp3G8M&imgurl=http://media.cmgdigital.com/shared/img/photos/2012/02/22/44/62/24618224.jpg&w=640&h=360&ei=19trUNfhBIHq8wTK7YDoDQ&zoom=1&iact=rc&dur=373&sig=110624198295100965336&page=4&tbnh=110&tbnw=194&start=68&ndsp=23&ved=1t:429,r:18,s:68,i:348&tx=73&ty=41

Edited October 3, 201213 yr by VooDoobie_Studios

Since all the pieces of glass are mapped of one single texture, you'd need to create a new texture file with both the red and yellow pieces of glass, and then re-map them to the new textures.

Can't you just edit the ELS textures of the lightbar to make them coloured? I've done it tons of times before.

Can't you just edit the ELS textures of the lightbar to make them coloured? I've done it tons of times before.

No because all the pieces of glass are mapped to one texture, meaning if you change it to red, all the glass will be red, and if you change it to blue all the glass will be blue.

No because all the pieces of glass are mapped to one texture, meaning if you change it to red, all the glass will be red, and if you change it to blue all the glass will be blue.

Not even if you extract the ELS textures directly from SparkIV? That's what I meant. :turned:

Yes, there is only one square on the texture which is clear. All the pieces of glass are mapped to that one single square. If you edit it, it will affect every single pice of glass.

Ah okay, thanks for clearing that up.

Pretty much like 00Stevo has on his WIP CVPI, he has the textures that hes mapped set to red and blue, but if you notice on his 6th pic the actual lightbar he made himself, but he has the glass 3 colors, clear, red and blue.

@Tom, I see what your saying, since both liberty's that are unlocked have just one item as the glass, so I'll poke around and see if I cant change the color, should be able to make my own and possibly assign that new material in material editor, right?

Edited October 4, 201213 yr by VooDoobie_Studios