OfficerUnderwood

I present a total remaster of my Marked ALST CVPI.
This remaster includes many updates like:
Upgraded to 11 model year Upgraded to the Whelen Liberty SX Updated Whelen TIR3's Proper "3rd Brake Light's" HQ Interior ALEA Skin and more!!! Anyways I hope you do enjoy this model as I did make sure this is as real as the CVPI's while there are some left in the fleet around my part of Bama and with the pictures that my good friend "Gump" provided which I thank & I took pride into it as a Future Trooper for the Great State of Alabama.
 
Exclusive to: GTA-Mod-Center.com & LCPDFR.com
NOTES: Picture don't fully represent final version, there where minor changes made since the pictures were taken.

ANOTHER CVPI AGAIN!!!!!!!!!!!!!!! This time a LCPD Traffic Enforcement Unit based off of Tarrytown New York PD's Special Enforcement. There is a marked skin in case you want to roll as a marked unit. Enjoy as always.

I release today a set of cars featuring the Federal Signal Valor lightbar. These cars are based off of Kygo/Tim98(at the time)'s Valor pack which was never released but featured in the videos of Code Zero in the .95 MP days. These use Code Zero's skin which I have permission to release with the cars, proof is in the credits on this page & the credits.txt. This pack will be updated at times in the next few weeks or days to add new vehicles.
NOTES:
1. DO NOT ASK ME TO MAKE A CAPRICE OR GIVE YOU THE MODEL AS THAT IS A AUTOMATIC NO!!
2. DO NOT UPLOAD OR REUPLOAD TO ANY SITES, Only uploaded by me to LCPDFR.com, GTAPoliceMods.com, & GTA-Mod-Center.com
3. DO NOT ASK ME FOR ANY UNLOCK PARTS AS I FOUND THEM JUST LIKE ANY PERSON ON A WEBSITE

I present to the public finally after figuring GTA V out and getting this ready for release. A 2011 Ford Crown Victoria Police Interceptor as The San Andreas Highway Patrol. This model has been worked on for more than a month's time almost to be up to the standards of a 2011 Ford Crown Victoria Police Interceptor. My sources are Knowledge, 2011 Ford Crown Victoria Manual, & Local Owners/Police. At this time the only inaccuracy is the Light Module on the dash which shall be worked on in a later update.
Bugs (1):
Gauge's are inaccurately calibrated, I expect you could rely on the good ole SNT Speedometer in the upper right like in IV Notes (2):
The model is locked under automatic insisted request of modelers Recommended using fellow ljcrary's Crown Victoria Sound Mod http://www.lcpdfr.com/files/file/8689-crown-victoria-sound-mod-v2/ If you have any questions concerning the model, you may contact me at anytime and I will be able to answer.

A simple Stalker DSR 2X with a remote.

USE MY NEW BASE UNDER THIS LOGO. THIS MODEL IS OLD. DONT BE THAT GUY THAT USES THE DRIVERSF MODEL. FORZA DID IT MORE JUSTICE.

After development started in August of 2015. I have been trying to achieve to get the perfect 2011 CVPI out to the public unlocked for all to use and make what they want, no matter how bad one thinks of their model. Today to the public I present the Development 2011 CVPI for everyone to use and enjoy.
I want to thank these people for their motivation to get this CVPI to where it is
Cj24 (For releasing the original model on IV) KevinDV (For his works on the original model) Ubisoft (For providing the parts I need thanks to their Lincoln Town Car in DriverSF) BxBugs123 (Late credit, Anyways I thank him for his headlamps textures) Lundy (For his motivation, help, & door handles) Gump (For his motivation, support, & testing of the model in which he would say "Hell yeah man!") ljcrary (For his motivation & support of the model to get it out to the public unlocked) Virzza (For his motivation & support on release) thegreathah (For his motivation & support on release) DroidRZRLover (For his motivation & support on release) Prophet (For his joke in which is very much true) and the Community for the models they release in order for all to enjoy and I hope this enhances it Bugs:
Gauge's are inaccurately calibrated, I expect you could rely on the good ole SNT Speedometer in the upper right like in IV Notes:
Original model: Unlocked for developmental usage, give credits as always As accurate as possible to the 2011 model year CVPI Recommended using fellow ljcrary's Crown Victoria Sound Mod  Updates might come in the near future. If I missed a credit, missed something, or whatever please contact me anytime and I'll be happy to fix or resolve whatever the problem may be with cooperation.

Another model release that I have been working on for a month or 2 maybe. This CHP CVPI Pack features currently the marked and slicktop variants. I do plan on later adding the Commercial Vehicle Enforcement CVPI.
Bugs:
On slicktop variant, you have to reset the window tint to "None" to get the rambar lights working. Notes :
As accurate as possible to my knowledge of the California Highway Patrol fleet To enable parking mode on slicktop variant, enable extra 1 in the components menu in Simple Native Trainer Recommended using fellow ljcrary's Crown Victoria Sound Mod http://www.lcpdfr.com/files/file/8689-crown-victoria-sound-mod-v2/ If you have any questions concerning the model, you may contact me at anytime and I will be able to answer.

A month in development trying to get it to work with GTA V's Siren System then transitioned EVL and finally finished. These 2 CVPI's are based on the LAPD & LASD but presented as LSPD & LSSD Fleet Vic's. Features a reworked Arjent made to work with EVL, accurate interior's to my knowledge and what I saw from pictures, & etc.
Enjoy.
Bugs (1):
Gauge's are inaccurately calibrated, I expect you could rely on the good ole SNT Speedometer in the upper right like in IV Notes (1):
Recommended using fellow ljcrary's Crown Victoria Sound Mod http://www.lcpdfr.com/files/file/8689-crown-victoria-sound-mod-v2/ & a visual mod of self choice Updates might come in the near future. This mod will be updated to support ELS when released. Requirements (1):
http://www.lcpdfr.com/files/file/9218-evl-beta/
If you have any questions concerning the model, you may contact me at anytime and I will be able to answer.

A simple Motorola XTL5000 radio
Notes:
Microphone might need resize Emis texture in file for you to map to the radio

Just a simple FS Touchmaster Delta siren box

Tonight members of LCPDFR. I present to you a DEV Tahoe for you modelers to use. Why did I do this model? Because frankly the original person who made a Tahoe close to this one wasn't really the nicest about me asking to convert his. Well... after that I just decided to find it and convert it myself. Took about a few months before I found it. So I converted it and made it way better than his base because why not? Hell I don't want to keep this model to myself like most. I want this to be released to you guys as ya'll deserve such. Please. Enjoy it.
I want to thank these people for their motivation to get this Tahoe to where it is
(Not saying) for not letting me convert his base and giving that motivation for me to do it on my own Gump for his "Tayhoe" love and for wanting me to make one for him GTAxBOSS for his Tahoe rims The Silent Talking Banana for his motivation on the model Those whom liked and commented on my status updates about the model and the Community for the models they release in order for all to enjoy and I hope this enhances it Bugs:
Gauge's are inaccurately calibrated, I expect you could rely on the good ole SNT Speedometer in the upper right like in IV Gauge's are mapped to the taxigen guage texture  Notes:
Model is over 90,000. This is mostly due to the interior. If demanded I will add a LQ interior as a option. Stock plates are removable. Just delete the plates in polygon mode by material selecting "vehicle_genericmud_car" material Unlocked for developmental usage, give credits as always As accurate as possible to the 2013 model year Updates might come in the near future If I missed a credit, missed something, or whatever please contact me anytime and I'll be happy to fix or resolve whatever the problem may be with cooperation.

A simple Stalker M/A-Com Radio.

A simple Stalker Dell Latitude 6420/30 ATG.

Oof. A fuckin' laptop. It's tough, I guess.

Let me add that + in there to be cool and hip with the kids here.
 
Instead of making a guide. Here's it is. A DLC that puts all the police cars together instead of being scattered here and there. Plus it allows you to create new proper slots. Figured I'd share since it could be useful to y'all plus to people making packs. If I somehow messed it up, comment and I'll try to figure it out. Worked about 10 minutes ago of uploading this.
 
Update: Well Albo made something similar which me and others had no idea about. Then again we were gone from FR for awhile. I made this for the Valor pack and decided to share it since I didn't see it plus no one made a proper guide on it. Mainly has use to people making packs at this point.

After almost a year in development I finally release this. Recently I've been extremely busy plus lost interest in the modeling scene. After recent events I have decided to release this since I obviously ain't working on it. It is at what most I've talked to said is a finished state. Some bugs here and there but minor enough for the average modeler to fix. Anyways I thank all the people who have contributed to the models in so many ways. It means alot. And I thank the community for it's support and the models they make. It's what keeps this community running. Thank y'all and take care.

A simple SmartController

*IN BIG BOLD LETTERS!!!! FOR Y'ALL WHO HAVE BEEN MAKING SKINS!! YOU MUST PAINT WHERE IT SAYS TO "KEEP BLACK" BLACK AND NOT THE BODY COLOR!!! THAT IS THE TRIM ON THE DOOR AND ON EVERY TAURUS IN REAL LIFE IT IS BLACK!!!! NOT BLUE, GREY, WHITE, OR WHATEVER!!!!*
Thank You
Here you go guys after 2 months I think of developing. A 2016 Ford Taurus Police Interceptor unlocked for the public to use! Frankly this is becoming the new Crown Victoria and there is no proper unlocked models for the public to use. So here is this. This took alot of motivation and help from the community and I would like to take a moment to thank these people for their support over the course of this development.
 
Ljcrary for being a Taurus lover and wanting one Gump for wanting a Taurus to make a K9 unit out of *ahem* Ridgerunner for allowing me to release his front bumper on this model Him1250 for providing parts to use Carper for his work on poly crunching the rear bumper BxBugs123 for allowing his parts to be converted to V finally as he said in a status update on his website OfficerFive0 for his support and offer of help Lundy for being L4's police... and letting me know about the "interior" material
Izick, DogShoe13, TrentMU, HDgamersPC, Drix Designs, Slendis, Thegreathah, Windows446, Neonlazer, GravelRoadCop, ALLENjr12 for their support
and the Community for the models they release in order for all to enjoy and I hope this enhances it
 
Bugs:
Gauge's are inaccurately calibrated, I expect you could rely on the good ole SNT Speedometer in the upper right like in IV Gauge needles are not blue, not sure how to do such? Notes:
To not overlook something I couldn't implement properly is you should add Whelen Vertex's in the headlamps! As shown here https://i.gyazo.com/241c0f3a5e62ec6f7f838a267985fb66.png Stock plates are removable. Just delete the plates in polygon mode by material selecting "vehicle_genericmud_car" material Unlocked for developmental usage, give credits as always As accurate as possible to the 2016 model year Updates might come in the near future  
If I missed a credit, missed something, or whatever please contact me anytime and I'll be happy to fix or resolve whatever the problem may be with cooperation.

And finally here is that 2015 Charger PPV you the community has been needing. Enjoy.
 
Bugs:
Gauge's are inaccurately calibrated, I expect you could rely on the good ole SNT Speedometer in the upper right like in IV Notes:
Model is over 80,000. This is mostly due to the interior. Stock plates are removable. Just delete the plates in polygon mode by material selecting "vehicle_genericmud_car" material DO NOT USE POLICE2's HANDLING LINE! Unlocked for developmental usage, give credits as always As accurate as possible to the 2015 model year Updates might come in the near future  
If I missed a credit, missed something, or whatever please contact me anytime and I'll be happy to fix or resolve whatever the problem may be with cooperation.

Here I am back from a long hiatus and thought I'd finish up the Impala as best as I can and release it to you guys to enjoy. The Charger will be done soon. After the Charger I will be focusing on my LCPD Valor Pack port development. Anyways here is the Impala finally. Enjoy.
 
Bugs:
Gauge's are inaccurately calibrated, I expect you could rely on the good ole SNT Speedometer in the upper right like in IV Notes:
Unlocked for developmental usage, give credits as always As accurate as possible to the 2016 model year Updates might come in the near future  
If I missed a credit, missed something, or whatever please contact me anytime and I'll be happy to fix or resolve whatever the problem may be with cooperation.

Here it is! A remaster after 2 years. Stop using my 2 year old model. Use this one. It's much better and does the Tahoe justice. Oh and the gauges are still mapped to GenTaxi. So figure it out. I don't really use the gauge. It's a useless luxary that can't get the speed right on custom models.
 
- 2007 Tahoe by someone on 3dCadBrowser
- Modifed into 2014 and converted to GTA V by OfficerUnderwood
- Interior by ShadyDK14, fitted by Peralta, edited by Peralta and OfficerUnderwood with parts by Ubisoft
- Light textures by Peralta
- Mirrors & door handles by Ubisoft, fitted by Peralta
- Center area, steering wheel, door arm rests, & seats by Ubisoft, edited by OfficerUnderwood.
- Wheels by BxBugs123, Tire texture by EVI.

Frick it. Here y'all go. I improved Hurk's Exploder and people said I should release it. Ta da.
 
Hurk's Exploder
police3_hi = 4.6MB & police3= 12.1MB (Oof... Big Oof) 165,849 polys 50 textures & 35 materials Hurk's Exploder modified alot by OfficerUnderwood
police3_hi = 3.7MB & police3= 7.4MB 150,935 polys 43 textures & 35 materials? Something like that. Credits:
- Ford explorer Base model purchased by Thehurk, GTAxB0SS, Requiem and Windows446
- Poly Crunched, Textured, Converted by Thehurk. 
- Interior purchased by TrentMU and FRGamer
- Textures by Taylor Swift, Thehurk, & OfficerUnderwood
- Heavily edited this piece of something into a polished piece of heck by OfficerUnderwood using parts by Criterion Software
- Rims by BxBugs123, Centercap by Carper
- Interceptor Hood text by GTAxB0SS
- I'm not gonna add my frickin' name 5 billion times to get attention
 
(12/22/18 1:50am) Test added to description to fuckin' rek some benson guy. Apparently you can add to descriptions without updating the file like in the past. Thanks FR. 

Hey there!
 
The newest addition to the CHP fleet, now also available for GTA V. 
 
Features:
Accurate Lighting
Accurate Equipment
The front and rear of the lightbar can be controlled independently
Animated  antenna
Reflective Decals
And a whole bunch of small details most of you will never notice
 
That should be it.
 
Have fun!
 
These cars require an unedited carvariation.meta to work properly!!!
If you do not have it, the yelp pattern will be messed up.

It's not just a k-9 unit! It's k-9 with a prisoner transport! So, now you can have best of both worlds! I spent a month on this Tahoe, perfecting this! There isn't a thing that wasn't looked at and fixed...Love this Tahoe..Even has working spotlights corona's!Own VCF. Some extra options should you decide you want them. Give it a download and check it out! Also, the twitter on the back of the Tahoe is real. I was making the livery from Georgia Tech PD and thought it would be cool to have a Sandy Shores PD twitter. If you want to check it out..just saying. Haha.

Credits:
 
To install the models:
1)Get OpenIV
2)Navigate to mods/update/x64/dlcpacks/latest patch day number/dlc.rpf/x64/levels/gta5/props/click on vehicles.rpf
3)Make sure edit mode is on at the top right and click the green "plus" up top.
4)Import the police.yft,police_hi and police.ytd
 
To install ELS .VCF
1)With normal window browser(not openIV) got to local disk C/Program Files/Rockstar Games/Grand Theft Auto V/ELS/pack_default
2)Drag and drop the police.xml that was provided in the download. The provided .VCF is to ensure correct lighting patterns and extra's.
 
To install extra options in the folders:
1)With OpenIV navigate to mods/update/x64/dlcpacks/latest patch day number/dlc.rpf/x64/levels/gta5/props/vehicles.rpf and look for police.ytd
2)Make sure edit mode is on
3)Click import
4)Naviate to where the extra optional textures are and click on them
5)Click save
 
 
Stay vigil and thirsty my friends..

0o0o0o0o0 I released a actual model 0o0o0o0o0
 
Here it is a slicktop with lights on it and a bunch of different skins like HEAT, DUI Enforcement, Traffic Enforcement, & Unmarked. Plus it reflects 0o0o0o.
 
Also if you're buying or selling glued together models. You're wrong and stupid.
 
Credits!