I just installed an FPIU and changed the diffuse tint to "0x00FFFFFF" the light bar is fine but the break lights are white? Any suggestions?

Thanks 

In the ELS XML file open it up and check the color and you can change it to red.  I had that happen to one of my vehicles.  You should see this in your vehicles ELS XML. 

 

<ACORONAS>
        <Headlights DfltPattern="0" ColorL="white" ColorR="white" />
        <TailLights DfltPattern="0" ColorL="red" ColorR="red" />
        <IndicatorsF DfltPattern="1" ColorL="red" ColorR="blue" />
        <IndicatorsB DfltPattern="0" ColorL="red" ColorR="red" />
        <ReverseLights DfltPattern="1" ColorL="red" ColorR="blue" />
    </ACORONAS>

 

Change the tail lights to red.  It will probably say white on yours.

ok will try it out thanks man!

1 hour ago, JBin818 said:

In the ELS XML file open it up and check the color and you can change it to red.  I had that happen to one of my vehicles.  You should see this in your vehicles ELS XML. 

 

<ACORONAS>
        <Headlights DfltPattern="0" ColorL="white" ColorR="white" />
        <TailLights DfltPattern="0" ColorL="red" ColorR="red" />
        <IndicatorsF DfltPattern="1" ColorL="red" ColorR="blue" />
        <IndicatorsB DfltPattern="0" ColorL="red" ColorR="red" />
        <ReverseLights DfltPattern="1" ColorL="red" ColorR="blue" />
    </ACORONAS>

 

Change the tail lights to red.  It will probably say white on yours.

my tail lights say red and are still white

Edited February 4, 20197 yr by Ocean25

How about your reverse lights?  What color do those say?  I think on my FPIU the reverse lights said white which would be true but since they were so close to the brake lights it made the break lights look white.  I just remembered that it looked like that on code 3.  I think normal cruise was ok.  Wonder if it is a problem with vehicle that the author may have to fix. 

the whole taillight is white, not the color it flashes like the actual color of it is white