I'm helping a guy with working on cars. We got a CHP Caprice (1986-1990), it uses the same carcols.ymt, carvariations.meta and ELS VCF files from Lundy's 1990 SDSO Caprice. We want to edit the carcols file in order to make the FS JetStream lightbar have the steady burn red light, according to California state laws. We tried to do it by ourselves but it turns out to be pretty tricky. What we got is this:

https://drive.google.com/open?id=1zzCH5iUMvy6VUJ06-N3-aRlO0WlbOKYb

 

Anyone with experience in making carcols patterns?

Edited February 27, 20188 yr by badass22

Can't help you much, but I swear I've seen car mods (both ELS and non-ELS) with steady burn lights for GTA V. It should be possible. 

4 hours ago, badass22 said:

I'm helping a guy with working on cars. We got a CHP Caprice (1986-1990), it uses the same carcols.ymt, carvariations.meta and ELS VCF files from Lundy's 1990 SDSO Caprice. We want to edit the carcols file in order to make the FS JetStream lightbar have the steady burn red light, according to California state laws. We tried to do it by ourselves but it turns out to be pretty tricky. What we got is this:

https://drive.google.com/open?id=1zzCH5iUMvy6VUJ06-N3-aRlO0WlbOKYb

 

Anyone with experience in making carcols patterns?

All you have to do is give the light a lightsemissive texture and material, and then name it as something light steady burn so you know what it is.

18 minutes ago, majorpaine2015 said:

All you have to do is give the light a lightsemissive texture and material, and then name it as something light steady burn so you know what it is.

no, then it would be on all the time. 

 

5 hours ago, badass22 said:

I'm helping a guy with working on cars. We got a CHP Caprice (1986-1990), it uses the same carcols.ymt, carvariations.meta and ELS VCF files from Lundy's 1990 SDSO Caprice. We want to edit the carcols file in order to make the FS JetStream lightbar have the steady burn red light, according to California state laws. We tried to do it by ourselves but it turns out to be pretty tricky. What we got is this:

https://drive.google.com/open?id=1zzCH5iUMvy6VUJ06-N3-aRlO0WlbOKYb

 

Anyone with experience in making carcols patterns?

is the siren set to rotator or flash?

3 hours ago, OfficerFive0 said:

no, then it would be on all the time. 

 

is the siren set to rotator or flash?

The lightbar pattern is rotary. It’s controlled by the carcols file. ELS VCF is just the stage controller (the light rotators are enabled in LSTG-3).

If you want, I can give you the carcols file here.

2 hours ago, badass22 said:

The lightbar pattern is rotary. It’s controlled by the carcols file. ELS VCF is just the stage controller (the light rotators are enabled in LSTG-3).

If you want, I can give you the carcols file here.

if you want the siren to be steady burn, then set rotate to false and flash to true. it may not be verbatim, as this is off of memory

@OfficerFive0 Here's my carcols setup: https://drive.google.com/open?id=1TZu4q7iKdJ3pEN1SOg-nE_oDeY9kgIIq

 

The line starts with Aerodynic, it's a modified version of the carcols from Lundy's ELS Caprice.

The settings were edited on the line RED ROTATOR #2.

Edited February 28, 20188 yr by badass22

@OfficerFive0 I figured out that the steady burning light were the 2 on the end of the lightbar (extra_ten).

 I edited the ELS file and installed Lundy’s corona enhancement.

And then I fixed it!

can anyone explain this a little more to me? Trying to set a steady burn light but this all sounds confusing af