Hello everybody, instead of stressing myself out over this glass, I came to the community to ask for help. So, as some of you may know, Im currently making a RCMP pack. But the issue is that the glass on my Chevy Tahoe and Chevy Express will NOT break. I have ID's set, flags set, Crash entered in the COL's and material but it just wont break. Please help me! Please do not link a video, they show the exact same thing Im doing to make glass break. Unless it shows something not listed here. Thanks. - OfficerWalters

 

http://prntscr.com/emdbc5

 

http://prntscr.com/emd36q

 

http://prntscr.com/emd1jo

Use a hammer to break it, should work after.

7 hours ago, OfficerWalters said:

Hello everybody, instead of stressing myself out over this glass, I came to the community to ask for help. So, as some of you may know, Im currently making a RCMP pack. But the issue is that the glass on my Chevy Tahoe and Chevy Express will NOT break. I have ID's set, flags set, Crash entered in the COL's and material but it just wont break. Please help me! Please do not link a video, they show the exact same thing Im doing to make glass break. Unless it shows something not listed here. Thanks. - OfficerWalters

 

~snip~

Do you have LODs?  Not having them also results in that bug. Also, although your settings appear for the most part correct, under   Properties > Mesh > Vertices > Format are the normals and deformable fields ticked? Refer to this thread as a guide.

 

6 hours ago, MrPotato said:

Use a hammer to break it, should work after.

You should try using a hammer on a rotting potato. I smell one.

Edited March 21, 20179 yr by Kane104

11 minutes ago, Kane104 said:

You should try using a hammer on a rotting potato. I smell one.

cute

1 hour ago, Kane104 said:

Do you have LODs?  Not having them also results in that bug. Also, although your settings appear for the most part correct, under   Properties > Mesh > Vertices > Format are the normals and deformable fields ticked? Refer to this thread as a guide.

 

You should try using a hammer on a rotting potato. I smell one.

No I don't have LODs, not yet. Yes normals and deformable are ticked

Just now, OfficerWalters said:

No I don't have LODs, not yet. Yes normals and deformable are ticked

Well, there's your problem. Just for testing sake create duplicates and add them to the LOD levels, at least up to L3. Then test again, it ought to work.

Alright, I'll try that once Im back from school

10 hours ago, Kane104 said:

Well, there's your problem. Just for testing sake create duplicates and add them to the LOD levels, at least up to L3. Then test again, it ought to work.

Ok, just tried, still does not work...

5 hours ago, OfficerWalters said:

Ok, just tried, still does not work...

Have you tried seeing if your cols have proper window id

 

8 hours ago, MrPotato said:

Have you tried seeing if your cols have proper window id

 

On 3/20/2017 at 10:42 PM, OfficerWalters said:

I have ID's set