Basically the title says it all! I was working on a semi project where I take the MTL Flatbed's cab and place it on the Phantom's frame. Exporting it from Zmodeler was a success and no errors were encountered. I am hoping this is just a simple handling line that needs to be changed.

 

Please if you know how to fix this, please reply!

 

Here is a video:

https://www.youtube.com/watch?v=dzaiNBxjY5M&feature=youtu.be

Video is still processing.

What is your handling line

What is your handling line

PHANTOM     10000.0  4.0   80 0.0 0.4 -0.3   0.0  7  0.14  0.3 135.0 0.20 0.50 0.2  40.0 1.10 0.85 35.0 0.15 0.40   1.0  0.6  0.6  0.20 -0.25 0.0  0.65   1.0 1.0 0.8 1.0 0.0  40000 200048 300000 2

 

 

It's the default Phantom's handling line.

Maybe change the handling down from 10000 to something different

Maybe change the handling down from 10000 to something different

Tried that, still bounces.

 

I changed the 10000 to 50000.

On 12/21/2014 at 5:33 PM, ThatOneHick said:

Tried that, still bounces.

 

I changed the 10000 to 50000.

How'd you fix this? I'm getting the bouncing shit now too...

6 hours ago, LAPD Gang Unit Jester said:

How'd you fix this? I'm getting the bouncing shit now too...

I figured out that I moved the tires where they are suppose to be without moving the collision for them. I alligned the collision for the wheels and it fixed everything.

I haven't done jack with the wheels. Would not moving the collision files for ELS and other crap do that?