OK so a few questions I am not very good at this

1st of all when you download the file in the INI only Alderney is filled out with POLICE, & POLICE2 if I wanted to do Broker, Bohan  etc.....

would I have to put POLICE= and then do POLICE2= and keep doing it

 

2nd- Lets say I wanted To do Alderney And I filled out POLICE= now I'm stuck it says in ini for police sign 4 you should put x-1 and for sign 1 put 0 but what about sign 2 & 3 I'm confused

 

3rd I made a Alderney skin and put it for sign one and it looked like this POLICE=0      And I used 0 for sign one but when I was in Alderney a different skin showed up

                                                                                                                  POLICE2=0

 

Attached is my ini showing what it looked like for alderney

 

 

From this Point forward I'm stuck

PLEASE HELP!

ok so what you do is copy paste the police and police2 words which is time consuming but worth the time you take. 2. Say you want your first skin to go in the Bohan area you find out what police_sign_* or cvpi_sign_* it is. Say the skin is the Police_sign_1 (In openIV or whatever texture viewer you have) you would set it out like this in the ALM.ini like so police=0 so skin 1 in OpenIV is skin0 in ALM.ini then skin2 in openiv is skin1 in alm.ini etc. if you get it good luck to you!

enjoy and hope you understand! Im on most times of the day so im here to help your issues

Thanks for your help :)

Nothing to see here!

---

This topic has been closed by LCPDFR.com staff as it has been posted in the wrong forum section. The LCPDFR support forum is for issues related to the LCPDFR modification itself only.

Please post your topic in the website support and suggestions forum instead, following the pinned instructions there.

• GTA IV Support Forum
  
• Website Support & Suggestions Support Forum
  

If you feel that this topic has been closed in error, please report this post.