SheriffRecon

I am back with another antenna. 
This antenna comes properly scaled referenced off its actual technical drawing supplied by Panorama themselves.
Also two different color variations, black and white colored housings. 
 
I hope you enjoy!
 
Polycounts in Zmod;
Antenna - 816 tris
 
Includes;
z3d file for the antenna with two different color variations
textures for all parts [1x dds in 256x256 pixel ratio / 3x dds in less than 32x32 pixel ratio]
 
TOS:
You have no authority nor permission to sell, release, or claim this product as your own
You have no authority nor permission to release a product of your own creation while utilizing my textures
You have authority and permission to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority and permission to use this product on a project for profit. No need for a "commerical license fee" 
If you use this product on a project for either profit or non-profit, please credit me in your credit's page.

This was a desire of mine to make a decent Brother printer for my own personal use, though I feel it to be the right thing to release to the community. 
This printer comes properly scaled referenced off of Brother's website, as well as a Gamber-Johnson styled/inspired armrest mount. 

I hope you enjoy. 
 
Polycounts in Zmod;
Printer - 814
Paper - 55
Mount - 849

Includes;
z3d file of the printer, paper and mount
textures for all parts [3x png in 1024x1024 pixel ratio]

TOS:
You have no authority to sell, release, or claim this product as your own
You have no authority to utilize my textures on your own released / paid part(s) 
You have no authority to convert this product to another game without explicit permission from myself
You have authority to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority to use this product on a project for profit. No need to contact me for a "commerical license fee" or permission to use on said project for profit
If you use this product on a project for either profit or non-profit, please credit me in your credit's page/file.

Nice simple air tank for your SCBA use cases. Comes correctly scaled given the 45 minute capacity limit. 
This is NOT EUP, this is a z3d dev asset to be used in your vehicle model creation(s). 

I hope you enjoy!

Polycounts in Zmod;
L0 - 530 tris
L1 - 294 tris
 
Includes;
z3d file for the AirPak
textures for all parts [3x png in 1024x512 pixel ratio]

TOS:
You have no authority nor permission to sell, release, or claim this product as your own
You have no authority nor permission to release a product of your own creation while utilizing my textures
You have authority and permission to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority and permission to use this product on a project for profit. No need for a "commerical license fee" 
If you use this product on a project for either profit or non-profit, please credit me in your credit's page.

I am back with another antenna. 
This antenna comes properly scaled referenced off its actual technical drawing supplied by Panorama themselves.
Also two different color variations, black and white colored housings. 
 
I hope you enjoy!
 
Polycounts in Zmod;
Antenna - 816 tris
 
Includes;
z3d file for the antenna with two different color variations
textures for all parts [1x dds in 256x256 pixel ratio / 3x dds in less than 32x32 pixel ratio]
 
TOS:
You have no authority nor permission to sell, release, or claim this product as your own
You have no authority nor permission to release a product of your own creation while utilizing my textures
You have authority and permission to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority and permission to use this product on a project for profit. No need for a "commerical license fee" 
If you use this product on a project for either profit or non-profit, please credit me in your credit's page.

I am back with another antenna. 
This antenna comes properly scaled referenced off its actual technical drawing supplied by Panorama themselves.
Also two different color variations, black and white colored housings. 
 
I hope you enjoy!
 
Polycounts in Zmod;
Antenna - 816 tris
 
Includes;
z3d file for the antenna with two different color variations
textures for all parts [1x dds in 256x256 pixel ratio / 3x dds in less than 32x32 pixel ratio]
 
TOS:
You have no authority nor permission to sell, release, or claim this product as your own
You have no authority nor permission to release a product of your own creation while utilizing my textures
You have authority and permission to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority and permission to use this product on a project for profit. No need for a "commerical license fee" 
If you use this product on a project for either profit or non-profit, please credit me in your credit's page.

Its a Setina PB300 made specifically to fit Underwoods CVPI base. 
This pushbar comes properly scaled and fitted directly, so no need to make adjustments. It will more than likely fit other CVPI base models, but you will have to fit it yourself. 
 
I hope you enjoy. 
 
Polycounts in Zmod; (will vary with crossbar, counts listed is utilizing the no holes crossbar)
L0 - 1236 tris
L1 - 722 tris
L2 - 588 tris

Includes;
z3d file of the pushbar with 2 other crossbar variants to support mounting of either CEOs Whelen IONs or Cj24's Whelen LIN3/TIR3 as well as a premade collision box
textures for everything [3x dds in 512x512 pixel ration]

TOS:
You have no authority nor permission to sell, release, or claim this product as your own
You have no authority nor permission to release a product of your own creation while utilizing my textures
You have authority and permission to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority and permission to use this product on a project for profit. No need for a "commerical license fee" 
If you use this product on a project for either profit or non-profit, please credit me in your credit's page. 

Its a Setina PB300 made specifically to fit Underwoods CVPI base. 
This pushbar comes properly scaled and fitted directly, so no need to make adjustments. It will more than likely fit other CVPI base models, but you will have to fit it yourself. 
 
I hope you enjoy. 
 
Polycounts in Zmod; (will vary with crossbar, counts listed is utilizing the no holes crossbar)
L0 - 1236 tris
L1 - 722 tris
L2 - 588 tris

Includes;
z3d file of the pushbar with 2 other crossbar variants to support mounting of either CEOs Whelen IONs or Cj24's Whelen LIN3/TIR3 as well as a premade collision box
textures for everything [3x dds in 512x512 pixel ration]

TOS:
You have no authority nor permission to sell, release, or claim this product as your own
You have no authority nor permission to release a product of your own creation while utilizing my textures
You have authority and permission to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority and permission to use this product on a project for profit. No need for a "commerical license fee" 
If you use this product on a project for either profit or non-profit, please credit me in your credit's page. 

Its an antenna the mounts to the glass of your vehicle WITHOUT creating a hole in it. Isn't that cool? 
This antenna comes properly scaled referenced off its actual technical drawing supplied by Panorama themselves. 
As well comes with proper axis points for easy rotation of the antenna. You're welcome. 

I hope you enjoy!

Polycounts in Zmod;
Antenna - 632 or 636 tris

Includes;
z3d file for the antenna with proper scale box for wire size 
textures for all parts [2x png in 512x512 pixel ratio / 1x png in 4x4 pixel ratio]

TOS:
You have no authority to sell, release, or claim this product as your own
You have no authority to utilize my textures on your own released / paid part(s) 
You have no authority to convert this product to another game without explicit permission from myself
You have authority to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority to use this product on a project for profit. No need to contact me for a "commerical license fee" or permission to use on said project for profit
If you use this product on a project for either profit or non-profit, please credit me in your credit's page/file.

Its an antenna the mounts to the glass of your vehicle WITHOUT creating a hole in it. Isn't that cool? 
This antenna comes properly scaled referenced off its actual technical drawing supplied by Panorama themselves. 
As well comes with proper axis points for easy rotation of the antenna. You're welcome. 

I hope you enjoy!

Polycounts in Zmod;
Antenna - 632 or 636 tris

Includes;
z3d file for the antenna with proper scale box for wire size 
textures for all parts [2x png in 512x512 pixel ratio / 1x png in 4x4 pixel ratio]

TOS:
You have no authority to sell, release, or claim this product as your own
You have no authority to utilize my textures on your own released / paid part(s) 
You have no authority to convert this product to another game without explicit permission from myself
You have authority to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority to use this product on a project for profit. No need to contact me for a "commerical license fee" or permission to use on said project for profit
If you use this product on a project for either profit or non-profit, please credit me in your credit's page/file.

This was a desire of mine to make a decent Brother printer for my own personal use, though I feel it to be the right thing to release to the community. 
This printer comes properly scaled referenced off of Brother's website, as well as a Gamber-Johnson styled/inspired armrest mount. 

I hope you enjoy. 
 
Polycounts in Zmod;
Printer - 814
Paper - 55
Mount - 849

Includes;
z3d file of the printer, paper and mount
textures for all parts [3x png in 1024x1024 pixel ratio]

TOS:
You have no authority to sell, release, or claim this product as your own
You have no authority to utilize my textures on your own released / paid part(s) 
You have no authority to convert this product to another game without explicit permission from myself
You have authority to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority to use this product on a project for profit. No need to contact me for a "commerical license fee" or permission to use on said project for profit
If you use this product on a project for either profit or non-profit, please credit me in your credit's page/file.

This was a desire of mine to make a decent Brother printer for my own personal use, though I feel it to be the right thing to release to the community. 
This printer comes properly scaled referenced off of Brother's website, as well as a Gamber-Johnson styled/inspired armrest mount. 

I hope you enjoy. 
 
Polycounts in Zmod;
Printer - 814
Paper - 55
Mount - 849

Includes;
z3d file of the printer, paper and mount
textures for all parts [3x png in 1024x1024 pixel ratio]

TOS:
You have no authority to sell, release, or claim this product as your own
You have no authority to utilize my textures on your own released / paid part(s) 
You have no authority to convert this product to another game without explicit permission from myself
You have authority to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority to use this product on a project for profit. No need to contact me for a "commerical license fee" or permission to use on said project for profit
If you use this product on a project for either profit or non-profit, please credit me in your credit's page/file.

This was a desire of mine to make a decent Brother printer for my own personal use, though I feel it to be the right thing to release to the community. 
This printer comes properly scaled referenced off of Brother's website, as well as a Gamber-Johnson styled/inspired armrest mount. 

I hope you enjoy. 
 
Polycounts in Zmod;
Printer - 814
Paper - 55
Mount - 849

Includes;
z3d file of the printer, paper and mount
textures for all parts [3x png in 1024x1024 pixel ratio]

TOS:
You have no authority to sell, release, or claim this product as your own
You have no authority to utilize my textures on your own released / paid part(s) 
You have no authority to convert this product to another game without explicit permission from myself
You have authority to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority to use this product on a project for profit. No need to contact me for a "commerical license fee" or permission to use on said project for profit
If you use this product on a project for either profit or non-profit, please credit me in your credit's page/file.

This was a desire of mine to make a decent Brother printer for my own personal use, though I feel it to be the right thing to release to the community. 
This printer comes properly scaled referenced off of Brother's website, as well as a Gamber-Johnson styled/inspired armrest mount. 

I hope you enjoy. 
 
Polycounts in Zmod;
Printer - 814
Paper - 55
Mount - 849

Includes;
z3d file of the printer, paper and mount
textures for all parts [3x png in 1024x1024 pixel ratio]

TOS:
You have no authority to sell, release, or claim this product as your own
You have no authority to utilize my textures on your own released / paid part(s) 
You have no authority to convert this product to another game without explicit permission from myself
You have authority to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority to use this product on a project for profit. No need to contact me for a "commerical license fee" or permission to use on said project for profit
If you use this product on a project for either profit or non-profit, please credit me in your credit's page/file.

This was a desire of mine to make a decent Brother printer for my own personal use, though I feel it to be the right thing to release to the community. 
This printer comes properly scaled referenced off of Brother's website, as well as a Gamber-Johnson styled/inspired armrest mount. 

I hope you enjoy. 
 
Polycounts in Zmod;
Printer - 814
Paper - 55
Mount - 849

Includes;
z3d file of the printer, paper and mount
textures for all parts [3x png in 1024x1024 pixel ratio]

TOS:
You have no authority to sell, release, or claim this product as your own
You have no authority to utilize my textures on your own released / paid part(s) 
You have no authority to convert this product to another game without explicit permission from myself
You have authority to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority to use this product on a project for profit. No need to contact me for a "commerical license fee" or permission to use on said project for profit
If you use this product on a project for either profit or non-profit, please credit me in your credit's page/file.

This was a desire of mine to make a decent Brother printer for my own personal use, though I feel it to be the right thing to release to the community. 
This printer comes properly scaled referenced off of Brother's website, as well as a Gamber-Johnson styled/inspired armrest mount. 

I hope you enjoy. 
 
Polycounts in Zmod;
Printer - 814
Paper - 55
Mount - 849

Includes;
z3d file of the printer, paper and mount
textures for all parts [3x png in 1024x1024 pixel ratio]

TOS:
You have no authority to sell, release, or claim this product as your own
You have no authority to utilize my textures on your own released / paid part(s) 
You have no authority to convert this product to another game without explicit permission from myself
You have authority to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority to use this product on a project for profit. No need to contact me for a "commerical license fee" or permission to use on said project for profit
If you use this product on a project for either profit or non-profit, please credit me in your credit's page/file.

This was a desire of mine to make a decent Brother printer for my own personal use, though I feel it to be the right thing to release to the community. 
This printer comes properly scaled referenced off of Brother's website, as well as a Gamber-Johnson styled/inspired armrest mount. 

I hope you enjoy. 
 
Polycounts in Zmod;
Printer - 814
Paper - 55
Mount - 849

Includes;
z3d file of the printer, paper and mount
textures for all parts [3x png in 1024x1024 pixel ratio]

TOS:
You have no authority to sell, release, or claim this product as your own
You have no authority to utilize my textures on your own released / paid part(s) 
You have no authority to convert this product to another game without explicit permission from myself
You have authority to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority to use this product on a project for profit. No need to contact me for a "commerical license fee" or permission to use on said project for profit
If you use this product on a project for either profit or non-profit, please credit me in your credit's page/file.

This was a desire of mine to make a decent Brother printer for my own personal use, though I feel it to be the right thing to release to the community. 
This printer comes properly scaled referenced off of Brother's website, as well as a Gamber-Johnson styled/inspired armrest mount. 

I hope you enjoy. 
 
Polycounts in Zmod;
Printer - 814
Paper - 55
Mount - 849

Includes;
z3d file of the printer, paper and mount
textures for all parts [3x png in 1024x1024 pixel ratio]

TOS:
You have no authority to sell, release, or claim this product as your own
You have no authority to utilize my textures on your own released / paid part(s) 
You have no authority to convert this product to another game without explicit permission from myself
You have authority to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority to use this product on a project for profit. No need to contact me for a "commerical license fee" or permission to use on said project for profit
If you use this product on a project for either profit or non-profit, please credit me in your credit's page/file.

Mounting bracket for Whelen IONs under the rear spoiler of Chevrolet's Tahoe PPV/SSV vehicle. 
This specific mount is standard fitted to GeorgieMoon's 2018 Tahoe version 1.2 PPV/SSV and is fitted for CEO's paid IONs
It will fit other base models if you know how to vertex it, I guess. 
No I will not help you fit it to other base models. 
 
Polycount; 1806 for dual mount in zmod 
Tricount; 2496 for dual mount in zmod
Vertcount; 2036 for dual mount in zmod

Includes;
The mount in z3d format
The mounts textures [3x png in 128x128 pixel ratio]
(CEO paid IONs are not included) 



You have no authority to sell, release, or claim this product as your own
You have no authority to release a product of your own while utilizing my textures
You have authority to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority to use this product on a project for profit. No need for a "commerical license fee" 
If you use this product on a project for either profit or non-profit, please credit me in your credit's page.

Mounting bracket for Whelen IONs under the rear spoiler of Ford's Police Interceptor Utility vehicle. 
This specific mount is standard fitted to Kane104's FPIU version 2.5 and is fitted for CEO's paid IONs
It will fit other base models if you know how to vertex it, I guess. 
No I will not help you fit it to other base models. 
 
Polycount; 1022 for dual mount in zmod 
Tricount; 2044 for dual mount in zmod
Vertcount; 1944 for dual mount in zmod

Includes;
The mount in z3d format
The mounts textures [3x png in 128x128 pixel ratio]
(CEO paid IONs are not included) 



You have no authority to sell, release, or claim this product as your own
You have no authority to release a product of your own while utilizing my textures
You have authority to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority to use this product on a project for profit. No need for a "commerical license fee" 
If you use this product on a project for either profit or non-profit, please credit me in your credit's page.

Mounting bracket for Whelen IONs under the rear spoiler of Ford's Police Interceptor Utility vehicle. 
This specific mount is standard fitted to Kane104's FPIU version 2.5 and is fitted for CEO's paid IONs
It will fit other base models if you know how to vertex it, I guess. 
No I will not help you fit it to other base models. 
 
Polycount; 1022 for dual mount in zmod 
Tricount; 2044 for dual mount in zmod
Vertcount; 1944 for dual mount in zmod

Includes;
The mount in z3d format
The mounts textures [3x png in 128x128 pixel ratio]
(CEO paid IONs are not included) 



You have no authority to sell, release, or claim this product as your own
You have no authority to release a product of your own while utilizing my textures
You have authority to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority to use this product on a project for profit. No need for a "commerical license fee" 
If you use this product on a project for either profit or non-profit, please credit me in your credit's page.

Mounting bracket for Whelen IONs under the rear spoiler of Chevrolet's Tahoe PPV/SSV vehicle. 
This specific mount is standard fitted to GeorgieMoon's 2018 Tahoe version 1.2 PPV/SSV and is fitted for CEO's paid IONs
It will fit other base models if you know how to vertex it, I guess. 
No I will not help you fit it to other base models. 
 
Polycount; 1806 for dual mount in zmod 
Tricount; 2496 for dual mount in zmod
Vertcount; 2036 for dual mount in zmod

Includes;
The mount in z3d format
The mounts textures [3x png in 128x128 pixel ratio]
(CEO paid IONs are not included) 



You have no authority to sell, release, or claim this product as your own
You have no authority to release a product of your own while utilizing my textures
You have authority to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority to use this product on a project for profit. No need for a "commerical license fee" 
If you use this product on a project for either profit or non-profit, please credit me in your credit's page.

Mounting bracket for Whelen IONs under the rear spoiler of Ford's Police Interceptor Utility vehicle. 
This specific mount is standard fitted to Kane104's FPIU version 2.5 and is fitted for CEO's paid IONs
It will fit other base models if you know how to vertex it, I guess. 
No I will not help you fit it to other base models. 
 
Polycount; 1022 for dual mount in zmod 
Tricount; 2044 for dual mount in zmod
Vertcount; 1944 for dual mount in zmod

Includes;
The mount in z3d format
The mounts textures [3x png in 128x128 pixel ratio]
(CEO paid IONs are not included) 



You have no authority to sell, release, or claim this product as your own
You have no authority to release a product of your own while utilizing my textures
You have authority to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority to use this product on a project for profit. No need for a "commerical license fee" 
If you use this product on a project for either profit or non-profit, please credit me in your credit's page.

Mounting bracket for Whelen IONs under the rear spoiler of Chevrolet's Tahoe PPV/SSV vehicle. 
This specific mount is standard fitted to GeorgieMoon's 2018 Tahoe version 1.2 PPV/SSV and is fitted for CEO's paid IONs
It will fit other base models if you know how to vertex it, I guess. 
No I will not help you fit it to other base models. 
 
Polycount; 1806 for dual mount in zmod 
Tricount; 2496 for dual mount in zmod
Vertcount; 2036 for dual mount in zmod

Includes;
The mount in z3d format
The mounts textures [3x png in 128x128 pixel ratio]
(CEO paid IONs are not included) 



You have no authority to sell, release, or claim this product as your own
You have no authority to release a product of your own while utilizing my textures
You have authority to make edits to this product on your own accord, though you cannot release it to the general public without explicit permission from myself
You have authority to use this product on a project for profit. No need for a "commerical license fee" 
If you use this product on a project for either profit or non-profit, please credit me in your credit's page.