Stenda Group

Pullover+
Extends LSPDFR's traffic stop system with on-foot vehicle control, intelligent repositioning, and enhanced pullover animations — all fully configurable and compatible with your existing setup.

The plugin is available in 5 different languages: English, Spanish, French, German, and Russian


Requirements :
LSPDFR 0.4+
Optimized for use with Policing Redefined or Stop The Ped

Installation :
CopyPullover+.dllandPullover+.iniintoGTA V\Plugins\LSPDFR\
EditPullover+.inito configure keys, language, and module settings
Launch GTA V

Configuration & Commands :
Everything configurable via a single Pullover+.ini file. All settings reloadable at runtime without restarting LSPDFR.

Key SHIFT+E— initiate a traffic stop while on foot (use the same key to cancel it)
Controller : LeftShoulder+DPadDown
Key SHIFT+N— place a blue position marker to set exactly where the vehicle should stop. Move the marker with the arrow keys, confirm with Enter. Press again to clear the saved position.
Controller : LeftShoulder+DPadRight
Key M— when in your police vehicle during a pullover, opens a blue marker to choose exactly where the suspect vehicle should reposition. Move with arrow keys, confirm with Enter, press M again to cancel.
Up/Down/Left/Right — move the blue marker (configurable) Enter — confirm marker position (configurable) NumPad5 — reset marker to default position (configurable)

Pullover ReloadSettings— reload ini live
Pullover ToggleFootTrafficStop— toggle module
Pullover SetLanguage— switch language live

Features :

On-foot Traffic Stop
Signal a moving vehicle to pull over while standing on the roadside — no police car required. Works with a configurable key or controller button.

Cone-based vehicle detection with configurable range and angle
Chained vanilla animations: hand raise → pointing gesture
Place a blue position marker (Shift+N) to set exactly where the vehicle should stop — move it with arrow keys and confirm with Enter
Configurable flee chance triggers a real LSPDFR pursuit
Automatic road-aligned parking when no position is set: lateral offset + heading correction
Stuck detection — aborts the wait loop if the vehicle is blocked and forces position as fallback
Same key releases the vehicle — driver returns to normal traffic
Ambient speech on stop trigger, gender-aware voice (toggleable)
Full controller support with independent button + modifier


Enhanced Traffic Stop
Improves vanilla LSPDFR pullovers with repositioning, animation, and sound — triggered during an active in-vehicle pullover with a single keypress.

Press M to open a blue position marker — place it exactly where the suspect should stop, move it with arrow keys, confirm with Enter, cancel with M
When on foot during a pullover, M triggers automatic road-aligned repositioning instead
Road heading captured before maneuver for accurate final alignment
Wave animation plays on pullover initiation
ELS yelp siren triggered automatically
"Stop vehicle" megaphone speech on pullover start, gender-aware voice
Repositioning blocked if suspect vehicle is still moving
All marker keys fully configurable via ini (keyboard + controller)


Incompatibilities :
This plugin is intended to serve, in part, as a spiritual successor to Custom Pullover plugin. There is no need to use Custom Pullover (which has not been updated for a long time), and doing so could cause compatibility issues with this plugin.

Known bugs :
/

Pullover+
Extends LSPDFR's traffic stop system with on-foot vehicle control, intelligent repositioning, and enhanced pullover animations — all fully configurable and compatible with your existing setup.

The plugin is available in 5 different languages: English, Spanish, French, German, and Russian


Requirements :
LSPDFR 0.4+
Optimized for use with Policing Redefined or Stop The Ped

Installation :
CopyPullover+.dllandPullover+.iniintoGTA V\Plugins\LSPDFR\
EditPullover+.inito configure keys, language, and module settings
Launch GTA V

Configuration & Commands :
Everything configurable via a single Pullover+.ini file. All settings reloadable at runtime without restarting LSPDFR.

Key SHIFT+E— initiate a traffic stop while on foot (use the same key to cancel it)
Controller : LeftShoulder+DPadDown
Key SHIFT+N— place a blue position marker to set exactly where the vehicle should stop. Move the marker with the arrow keys, confirm with Enter. Press again to clear the saved position.
Controller : LeftShoulder+DPadRight
Key M— when in your police vehicle during a pullover, opens a blue marker to choose exactly where the suspect vehicle should reposition. Move with arrow keys, confirm with Enter, press M again to cancel.
Up/Down/Left/Right — move the blue marker (configurable) Enter — confirm marker position (configurable) NumPad5 — reset marker to default position (configurable)

Pullover ReloadSettings— reload ini live
Pullover ToggleFootTrafficStop— toggle module
Pullover SetLanguage— switch language live

Features :

On-foot Traffic Stop
Signal a moving vehicle to pull over while standing on the roadside — no police car required. Works with a configurable key or controller button.

Cone-based vehicle detection with configurable range and angle
Chained vanilla animations: hand raise → pointing gesture
Place a blue position marker (Shift+N) to set exactly where the vehicle should stop — move it with arrow keys and confirm with Enter
Configurable flee chance triggers a real LSPDFR pursuit
Automatic road-aligned parking when no position is set: lateral offset + heading correction
Stuck detection — aborts the wait loop if the vehicle is blocked and forces position as fallback
Same key releases the vehicle — driver returns to normal traffic
Ambient speech on stop trigger, gender-aware voice (toggleable)
Full controller support with independent button + modifier


Enhanced Traffic Stop
Improves vanilla LSPDFR pullovers with repositioning, animation, and sound — triggered during an active in-vehicle pullover with a single keypress.

Press M to open a blue position marker — place it exactly where the suspect should stop, move it with arrow keys, confirm with Enter, cancel with M
When on foot during a pullover, M triggers automatic road-aligned repositioning instead
Road heading captured before maneuver for accurate final alignment
Wave animation plays on pullover initiation
ELS yelp siren triggered automatically
"Stop vehicle" megaphone speech on pullover start, gender-aware voice
Repositioning blocked if suspect vehicle is still moving
All marker keys fully configurable via ini (keyboard + controller)


Incompatibilities :
This plugin is intended to serve, in part, as a spiritual successor to Custom Pullover plugin. There is no need to use Custom Pullover (which has not been updated for a long time), and doing so could cause compatibility issues with this plugin.

Known bugs :
/

Pullover+
Extends LSPDFR's traffic stop system with on-foot vehicle control, intelligent repositioning, and enhanced pullover animations — all fully configurable and compatible with your existing setup.

The plugin is available in 5 different languages: English, Spanish, French, German, and Russian


Requirements :
LSPDFR 0.4+
Optimized for use with Policing Redefined or Stop The Ped

Installation :
CopyPullover+.dllandPullover+.iniintoGTA V\Plugins\LSPDFR\
EditPullover+.inito configure keys, language, and module settings
Launch GTA V

Configuration & Commands :
Everything configurable via a single Pullover+.ini file. All settings reloadable at runtime without restarting LSPDFR.

Key SHIFT+E— initiate a traffic stop while on foot (use the same key to cancel it)
Controller : LeftShoulder+DPadDown
Key SHIFT+N— place a blue position marker to set exactly where the vehicle should stop. Move the marker with the arrow keys, confirm with Enter. Press again to clear the saved position.
Controller : LeftShoulder+DPadRight
Key M— when in your police vehicle during a pullover, opens a blue marker to choose exactly where the suspect vehicle should reposition. Move with arrow keys, confirm with Enter, press M again to cancel.
Up/Down/Left/Right — move the blue marker (configurable) Enter — confirm marker position (configurable) NumPad5 — reset marker to default position (configurable)

Pullover ReloadSettings— reload ini live
Pullover ToggleFootTrafficStop— toggle module
Pullover SetLanguage— switch language live

Features :

On-foot Traffic Stop
Signal a moving vehicle to pull over while standing on the roadside — no police car required. Works with a configurable key or controller button.

Cone-based vehicle detection with configurable range and angle
Chained vanilla animations: hand raise → pointing gesture
Place a blue position marker (Shift+N) to set exactly where the vehicle should stop — move it with arrow keys and confirm with Enter
Configurable flee chance triggers a real LSPDFR pursuit
Automatic road-aligned parking when no position is set: lateral offset + heading correction
Stuck detection — aborts the wait loop if the vehicle is blocked and forces position as fallback
Same key releases the vehicle — driver returns to normal traffic
Ambient speech on stop trigger, gender-aware voice (toggleable)
Full controller support with independent button + modifier


Enhanced Traffic Stop
Improves vanilla LSPDFR pullovers with repositioning, animation, and sound — triggered during an active in-vehicle pullover with a single keypress.

Press M to open a blue position marker — place it exactly where the suspect should stop, move it with arrow keys, confirm with Enter, cancel with M
When on foot during a pullover, M triggers automatic road-aligned repositioning instead
Road heading captured before maneuver for accurate final alignment
Wave animation plays on pullover initiation
ELS yelp siren triggered automatically
"Stop vehicle" megaphone speech on pullover start, gender-aware voice
Repositioning blocked if suspect vehicle is still moving
All marker keys fully configurable via ini (keyboard + controller)


Incompatibilities :
This plugin is intended to serve, in part, as a spiritual successor to Custom Pullover plugin. There is no need to use Custom Pullover (which has not been updated for a long time), and doing so could cause compatibility issues with this plugin.

Known bugs :
/

Pullover+
Extends LSPDFR's traffic stop system with on-foot vehicle control, intelligent repositioning, and enhanced pullover animations — all fully configurable and compatible with your existing setup.

The plugin is available in 5 different languages: English, Spanish, French, German, and Russian


Requirements :
LSPDFR 0.4+
Optimized for use with Policing Redefined or Stop The Ped

Installation :
CopyPullover+.dllandPullover+.iniintoGTA V\Plugins\LSPDFR\
EditPullover+.inito configure keys, language, and module settings
Launch GTA V

Configuration & Commands :
Everything configurable via a single Pullover+.ini file. All settings reloadable at runtime without restarting LSPDFR.

Key SHIFT+E— initiate a traffic stop while on foot (use the same key to cancel it)
Controller : LeftShoulder+DPadDown
Key SHIFT+N— place a blue position marker to set exactly where the vehicle should stop. Move the marker with the arrow keys, confirm with Enter. Press again to clear the saved position.
Controller : LeftShoulder+DPadRight
Key M— when in your police vehicle during a pullover, opens a blue marker to choose exactly where the suspect vehicle should reposition. Move with arrow keys, confirm with Enter, press M again to cancel.
Up/Down/Left/Right — move the blue marker (configurable) Enter — confirm marker position (configurable) NumPad5 — reset marker to default position (configurable)

Pullover ReloadSettings— reload ini live
Pullover ToggleFootTrafficStop— toggle module
Pullover SetLanguage— switch language live

Features :

On-foot Traffic Stop
Signal a moving vehicle to pull over while standing on the roadside — no police car required. Works with a configurable key or controller button.

Cone-based vehicle detection with configurable range and angle
Chained vanilla animations: hand raise → pointing gesture
Place a blue position marker (Shift+N) to set exactly where the vehicle should stop — move it with arrow keys and confirm with Enter
Configurable flee chance triggers a real LSPDFR pursuit
Automatic road-aligned parking when no position is set: lateral offset + heading correction
Stuck detection — aborts the wait loop if the vehicle is blocked and forces position as fallback
Same key releases the vehicle — driver returns to normal traffic
Ambient speech on stop trigger, gender-aware voice (toggleable)
Full controller support with independent button + modifier


Enhanced Traffic Stop
Improves vanilla LSPDFR pullovers with repositioning, animation, and sound — triggered during an active in-vehicle pullover with a single keypress.

Press M to open a blue position marker — place it exactly where the suspect should stop, move it with arrow keys, confirm with Enter, cancel with M
When on foot during a pullover, M triggers automatic road-aligned repositioning instead
Road heading captured before maneuver for accurate final alignment
Wave animation plays on pullover initiation
ELS yelp siren triggered automatically
"Stop vehicle" megaphone speech on pullover start, gender-aware voice
Repositioning blocked if suspect vehicle is still moving
All marker keys fully configurable via ini (keyboard + controller)


Incompatibilities :
This plugin is intended to serve, in part, as a spiritual successor to Custom Pullover plugin. There is no need to use Custom Pullover (which has not been updated for a long time), and doing so could cause compatibility issues with this plugin.

Known bugs :
/

Pullover+
Extends LSPDFR's traffic stop system with on-foot vehicle control, intelligent repositioning, and enhanced pullover animations — all fully configurable and compatible with your existing setup.

The plugin is available in 5 different languages: English, Spanish, French, German, and Russian


Requirements :
LSPDFR 0.4+
Optimized for use with Policing Redefined or Stop The Ped

Installation :
CopyPullover+.dllandPullover+.iniintoGTA V\Plugins\LSPDFR\
EditPullover+.inito configure keys, language, and module settings
Launch GTA V

Configuration & Commands :
Everything configurable via a single Pullover+.ini file. All settings reloadable at runtime without restarting LSPDFR.

Key SHIFT+E— initiate a traffic stop while on foot (use the same key to cancel it)
Controller : LeftShoulder+DPadDown
Key SHIFT+N— place a blue position marker to set exactly where the vehicle should stop. Move the marker with the arrow keys, confirm with Enter. Press again to clear the saved position.
Controller : LeftShoulder+DPadRight
Key M— when in your police vehicle during a pullover, opens a blue marker to choose exactly where the suspect vehicle should reposition. Move with arrow keys, confirm with Enter, press M again to cancel.
Up/Down/Left/Right — move the blue marker (configurable) Enter — confirm marker position (configurable) NumPad5 — reset marker to default position (configurable)

Pullover ReloadSettings— reload ini live
Pullover ToggleFootTrafficStop— toggle module
Pullover SetLanguage— switch language live

Features :

On-foot Traffic Stop
Signal a moving vehicle to pull over while standing on the roadside — no police car required. Works with a configurable key or controller button.

Cone-based vehicle detection with configurable range and angle
Chained vanilla animations: hand raise → pointing gesture
Place a blue position marker (Shift+N) to set exactly where the vehicle should stop — move it with arrow keys and confirm with Enter
Configurable flee chance triggers a real LSPDFR pursuit
Automatic road-aligned parking when no position is set: lateral offset + heading correction
Stuck detection — aborts the wait loop if the vehicle is blocked and forces position as fallback
Same key releases the vehicle — driver returns to normal traffic
Ambient speech on stop trigger, gender-aware voice (toggleable)
Full controller support with independent button + modifier


Enhanced Traffic Stop
Improves vanilla LSPDFR pullovers with repositioning, animation, and sound — triggered during an active in-vehicle pullover with a single keypress.

Press M to open a blue position marker — place it exactly where the suspect should stop, move it with arrow keys, confirm with Enter, cancel with M
When on foot during a pullover, M triggers automatic road-aligned repositioning instead
Road heading captured before maneuver for accurate final alignment
Wave animation plays on pullover initiation
ELS yelp siren triggered automatically
"Stop vehicle" megaphone speech on pullover start, gender-aware voice
Repositioning blocked if suspect vehicle is still moving
All marker keys fully configurable via ini (keyboard + controller)


Incompatibilities :
This plugin is intended to serve, in part, as a spiritual successor to Custom Pullover plugin. There is no need to use Custom Pullover (which has not been updated for a long time), and doing so could cause compatibility issues with this plugin.

Known bugs :
/

Pullover+
Extends LSPDFR's traffic stop system with on-foot vehicle control, intelligent repositioning, and enhanced pullover animations — all fully configurable and compatible with your existing setup.

The plugin is available in 5 different languages: English, Spanish, French, German, and Russian


Requirements :
LSPDFR 0.4+
Optimized for use with Policing Redefined or Stop The Ped

Installation :
CopyPullover+.dllandPullover+.iniintoGTA V\Plugins\LSPDFR\
EditPullover+.inito configure keys, language, and module settings
Launch GTA V

Configuration & Commands :
Everything configurable via a single Pullover+.ini file. All settings reloadable at runtime without restarting LSPDFR.

Key SHIFT+E— initiate a traffic stop while on foot (use the same key to cancel it)
Controller : LeftShoulder+DPadDown
Key SHIFT+N— place a blue position marker to set exactly where the vehicle should stop. Move the marker with the arrow keys, confirm with Enter. Press again to clear the saved position.
Controller : LeftShoulder+DPadRight
Key M— when in your police vehicle during a pullover, opens a blue marker to choose exactly where the suspect vehicle should reposition. Move with arrow keys, confirm with Enter, press M again to cancel.
Up/Down/Left/Right — move the blue marker (configurable) Enter — confirm marker position (configurable) NumPad5 — reset marker to default position (configurable)

Pullover ReloadSettings— reload ini live
Pullover ToggleFootTrafficStop— toggle module
Pullover SetLanguage— switch language live

Features :

On-foot Traffic Stop
Signal a moving vehicle to pull over while standing on the roadside — no police car required. Works with a configurable key or controller button.

Cone-based vehicle detection with configurable range and angle
Chained vanilla animations: hand raise → pointing gesture
Place a blue position marker (Shift+N) to set exactly where the vehicle should stop — move it with arrow keys and confirm with Enter
Configurable flee chance triggers a real LSPDFR pursuit
Automatic road-aligned parking when no position is set: lateral offset + heading correction
Stuck detection — aborts the wait loop if the vehicle is blocked and forces position as fallback
Same key releases the vehicle — driver returns to normal traffic
Ambient speech on stop trigger, gender-aware voice (toggleable)
Full controller support with independent button + modifier


Enhanced Traffic Stop
Improves vanilla LSPDFR pullovers with repositioning, animation, and sound — triggered during an active in-vehicle pullover with a single keypress.

Press M to open a blue position marker — place it exactly where the suspect should stop, move it with arrow keys, confirm with Enter, cancel with M
When on foot during a pullover, M triggers automatic road-aligned repositioning instead
Road heading captured before maneuver for accurate final alignment
Wave animation plays on pullover initiation
ELS yelp siren triggered automatically
"Stop vehicle" megaphone speech on pullover start, gender-aware voice
Repositioning blocked if suspect vehicle is still moving
All marker keys fully configurable via ini (keyboard + controller)


Incompatibilities :
This plugin is intended to serve, in part, as a spiritual successor to Custom Pullover plugin. There is no need to use Custom Pullover (which has not been updated for a long time), and doing so could cause compatibility issues with this plugin.

Known bugs :
/

Pullover+
Extends LSPDFR's traffic stop system with on-foot vehicle control, intelligent repositioning, and enhanced pullover animations — all fully configurable and compatible with your existing setup.

The plugin is available in 5 different languages: English, Spanish, French, German, and Russian


Requirements :
LSPDFR 0.4+
Optimized for use with Policing Redefined or Stop The Ped

Installation :
CopyPullover+.dllandPullover+.iniintoGTA V\Plugins\LSPDFR\
EditPullover+.inito configure keys, language, and module settings
Launch GTA V

Configuration & Commands :
Everything configurable via a single Pullover+.ini file. All settings reloadable at runtime without restarting LSPDFR.

Key SHIFT+E— initiate a traffic stop while on foot (use the same key to cancel it)
Controller : LeftShoulder+DPadDown
Key SHIFT+N— place a blue position marker to set exactly where the vehicle should stop. Move the marker with the arrow keys, confirm with Enter. Press again to clear the saved position.
Controller : LeftShoulder+DPadRight
Key M— when in your police vehicle during a pullover, opens a blue marker to choose exactly where the suspect vehicle should reposition. Move with arrow keys, confirm with Enter, press M again to cancel.
Up/Down/Left/Right — move the blue marker (configurable) Enter — confirm marker position (configurable) NumPad5 — reset marker to default position (configurable)

Pullover ReloadSettings— reload ini live
Pullover ToggleFootTrafficStop— toggle module
Pullover SetLanguage— switch language live

Features :

On-foot Traffic Stop
Signal a moving vehicle to pull over while standing on the roadside — no police car required. Works with a configurable key or controller button.

Cone-based vehicle detection with configurable range and angle
Chained vanilla animations: hand raise → pointing gesture
Place a blue position marker (Shift+N) to set exactly where the vehicle should stop — move it with arrow keys and confirm with Enter
Configurable flee chance triggers a real LSPDFR pursuit
Automatic road-aligned parking when no position is set: lateral offset + heading correction
Stuck detection — aborts the wait loop if the vehicle is blocked and forces position as fallback
Same key releases the vehicle — driver returns to normal traffic
Ambient speech on stop trigger, gender-aware voice (toggleable)
Full controller support with independent button + modifier


Enhanced Traffic Stop
Improves vanilla LSPDFR pullovers with repositioning, animation, and sound — triggered during an active in-vehicle pullover with a single keypress.

Press M to open a blue position marker — place it exactly where the suspect should stop, move it with arrow keys, confirm with Enter, cancel with M
When on foot during a pullover, M triggers automatic road-aligned repositioning instead
Road heading captured before maneuver for accurate final alignment
Wave animation plays on pullover initiation
ELS yelp siren triggered automatically
"Stop vehicle" megaphone speech on pullover start, gender-aware voice
Repositioning blocked if suspect vehicle is still moving
All marker keys fully configurable via ini (keyboard + controller)


Incompatibilities :
This plugin is intended to serve, in part, as a spiritual successor to Custom Pullover plugin. There is no need to use Custom Pullover (which has not been updated for a long time), and doing so could cause compatibility issues with this plugin.

Known bugs :
/