Hey guys, at the moment I'm working on a project in Zmodeler and have run into a super annoying issue.  I'm trying to mount the PFC Whelen Liberty on the vehicle and when I move it the glass/lenses move separately from the mounts and inner section of the light bar.  To be clear, before moving the light bar I have done the following:  Select>Quadr>dragged over the lightbar>Selected Mode.  For example, when I try to move the lightbar upwards, the base and inner section moved the same amount as my mouse but the glass/lenses move twice that distance, separate from the rest of the lightbar.  It's real confusing since its all selected.... Any ideas/fixes?

 

I had the same problem, make sure "Selected Mode" is on on the bottom and is red, also make sure you have the following selected on the right hand side (See picture below). Also make sure lightbar is selected (by right clicking and dragging to highlight it).

 

  

Make sure you haven't selected the dummies, cause that would what would be doing it, even if this doesn't work, select the out of place pieces individually and move them to where they need to be.

What do you mean selected the dummies?

 

The blue squares. They are dummies. When selected they turn pink (Sometimes Light Green) 

Well, if you have selected mode on, click on the square next to where it says Move and deselect 'Select Children'. 

I had the same problem, make sure "Selected Mode" is on on the bottom and is red, also make sure you have the following selected on the right hand side (See picture below). Also make sure lightbar is selected (by right clicking and dragging to highlight it).

 

  

Yeah everything is the same, selected is red and the bar is selected and it's still happening. I have another thing that's happening now.  I mounted a rambar on the vehicle and then saved.  I then loaded that save to mount the lightbar were speaking about and even though the rambar isn't selected it still moves when I move other components.

Well, if you have selected mode on, click on the square next to where it says Move and deselect 'Select Children'. 

That fixed it! Thanks man!

Yeah everything is the same, selected is red and the bar is selected and it's still happening. I have another thing that's happening now.  I mounted a rambar on the vehicle and then saved.  I then loaded that save to mount the lightbar were speaking about and even though the rambar isn't selected it still moves when I move other components.

That fixed it! Thanks man!

 

No problem! That same issue drove me nuts too....