Hi everyone, 

I've always wanted to get into the lspdfr community however never had a pc to run it on. Fast forward a few years and I am struggling to get this to run properly. 

I followed Criminal Justice's fairly popular tutorial on youtube. The first time I did it I went part by part, starting the game every time in between parts and the game ran perfectly until trying to start it up, resulting in a crash during the load in screen. I couldn't get it to start properly at all and when I was able to get into the game I would crash when trying to go on duty from the department. That was last night. This morning I decided to restart the entire process over again from the very beginning. I cleared all my downloads, cleared recycle bin, uninstalled gta 5 from steam and deleted the gta 5 main directory folder. After finishing steam download I loaded up gta to assure gta is running ok on my pc. All is good. I start with the first part of downloads which include, lspdfr, simple trainer, scripthookv, scripthookvdotnet, and the rage plug in. All are up to date. Installed them, restart pc and loaded in via rage. Still good no crashes. So, I back out and begin part 2 of the install which include, ELS, player location display, sticky wheels, and the albo common dll. Restarted pc, fired up thru rage and loaded in no issues. Again, backed out to start part 3. I am not going to list the mods downloaded to save space but just like you could assume all was fine. Did the same thing for part 4. Now I knew something in part 5 was causing the issues (since everything is fine prior to downloading these) so I started with JUST speed radar lite and loaded up. Still fine. Now I add Stop The Ped. I go to run it and it crashes during the load in screen. I back out and restart pc and try again. I load in fine and teleport myself to the department. Now, after clicking go on duty I hear a few beeps and it says lspdfr has crashed. I try to f4>reloadallplugins and it loads them back up fine but the game is clearly glitchy and I am stuck in the loading screen but without the loading screen (if that makes any sense). I back out and remove ALL stop the ped files restart pc and try again. Fires right up, could go on duty from department. I back out again and go onto the next download (skipping STP) and they both download fine and do not cause crashes. But, when I try stop the ped again, I crash.  In between then and now I feel like I've tried everything. Clearing command line, increasing plug in timeout threshold, forcing windowed mode, etc. However, if anyone has options for me to try I would be incredibly appreciative as I am slightly (clearly) desperate. My apologies for making this so long but I thought I would fully explain what's going on as this is kinda my final cry for help. 

 

I will attach my most recent crash log with stop the ped installed of course. 

 

Thank you in advance to anyone able to help me out!

 

most recent crash log.txt

It seems that HeliAssistance is the cause. Try to remove it

Did you change the .ini file in anyway? Seems like he can't parse the string(text) Either make sure that your .ini is probably setup or remove the plugin.

2 hours ago, MattexD said:

It seems that HeliAssistance is the cause. Try to remove it

Okay I will remove it and try again. Will get back to you asap, thank for the suggestion. 

1 hour ago, Bekobi said:

Did you change the .ini file in anyway? Seems like he can't parse the string(text) Either make sure that your .ini is probably setup or remove the plugin.

The .ini file for which part? Stop the Ped? I don't believe so I could check and I could provide screenshots however if I remove STP I could almost guarantee it won't crash. Any idea to see if the ini is messed up? Thank you

2 hours ago, MattexD said:

It seems that HeliAssistance is the cause. Try to remove it

okay HeliAssistance removed from my folder. still crashing. again, I don't crash on startup, I could f4 and reload all plug ins and all is good until I attempt to go on duty from the police station. I will include the screenshot from when/where it crashed as well as this most recent crash log from when it crashed again. Since you may have found an issue with HeliAssistance maybe you'll be able to compare the two and see if it's the same issue? Thanks a lot againRagePluginHook_14052021_170310.log

I've uploaded a screenshot of my plug ins folder in case any one else could chime in.

2 hours ago, midnightbos said:

okay HeliAssistance removed from my folder. still crashing. again, I don't crash on startup, I could f4 and reload all plug ins and all is good until I attempt to go on duty from the police station. I will include the screenshot from when/where it crashed as well as this most recent crash log from when it crashed again. Since you may have found an issue with HeliAssistance maybe you'll be able to compare the two and see if it's the same issue? Thanks a lot againRagePluginHook_14052021_170310.log

Okay good to know. Do you have the latest .NetFramework?

[5/14/2021 11:06:36 AM.272] LSPD First Response: ==============================
[5/14/2021 11:06:36 AM.272] LSPD First Response: UNHANDLED EXCEPTION DURING GAME FIBER TICK
[5/14/2021 11:06:36 AM.272] LSPD First Response: ------------------------------
[5/14/2021 11:06:36 AM.272] LSPD First Response: Origin: Game fiber "LoadingSpinner".
[5/14/2021 11:06:36 AM.272] LSPD First Response: ------------------------------
[5/14/2021 11:06:36 AM.272] LSPD First Response: Exception type: System.FormatException
[5/14/2021 11:06:36 AM.272] LSPD First Response: Exception message: Input string was not in a correct format.
[5/14/2021 11:06:36 AM.272] LSPD First Response: ------------------------------
[5/14/2021 11:06:36 AM.272] LSPD First Response: Inner exceptions:
[5/14/2021 11:06:36 AM.272] LSPD First Response: ------------------------------
[5/14/2021 11:06:36 AM.272] LSPD First Response: Stack trace:
[5/14/2021 11:06:36 AM.272] LSPD First Response: at System.Number.ParseSingle(String value, NumberStyles options, NumberFormatInfo numfmt)
[5/14/2021 11:06:36 AM.272] at System.Single.Parse(String s, IFormatProvider provider)
[5/14/2021 11:06:36 AM.272] at ‌‏‮‪‎‪‫‎‏‏‫‮‪‏‮‬‮‎‭‏‮‎‮.‍‌‍‎‍‮‬‬‍‎‍‮‪‭‏‪‪‪‪‪‭‮()
[5/14/2021 11:06:36 AM.272] at ‭‌‬‌‭‏‌‎‏‬‪‍‪‬‫‌‫‫‏‍‍‪‌‮.‭‏‭‫‮‎‬‍‬‏‎‫‌‫‌‌‬‭‭‭‎‮‎‮‫‪‮(Boolean )
[5/14/2021 11:06:36 AM.272] at LSPD_First_Response.Mod.API.Functions.OnDutyStateChangedEventHandler.Invoke(Boolean onDuty)
[5/14/2021 11:06:36 AM.272] at VYZgyEabNKeCIKItxZUeJxVHRTmz.WOcEqmqamTRSuREgyBShtzSVJPIw(Boolean ) in E:\GTA V\LSPD First Response\LSPD First Response\Mod\PlayerDutyController.cs:line 69
[5/14/2021 11:06:36 AM.272] at VYZgyEabNKeCIKItxZUeJxVHRTmz.JyGAhIXUXbjOrEazIDMgAekMGgur(Boolean , Boolean ) in E:\GTA V\LSPD First Response\LSPD First Response\Mod\PlayerDutyController.cs:line 371
[5/14/2021 11:06:36 AM.272] at ZjbmuBLXxiIbkzqxBMrLjnEDNFOO.xdmYviFXfqpJoeRqDBfioPCMYCJA() in E:\GTA V\LSPD First Response\LSPD First Response\Mod\Menus\DutyMenu.cs:line 235
[5/14/2021 11:06:36 AM.272] at bUeWHSiXMDmhlHLfcIsWVJTDFIFd.DKkWaFEcaeGXTbQKRmxLHOAefPiKA() in E:\GTA V\LSPD First Response\LSPD First Response\Engine\UI\LoadingSpinner.cs:line 42
[5/14/2021 11:06:36 AM.272] at Rage.GameFiber.Main()
[5/14/2021 11:06:36 AM.272] LSPD First Response: ==============================

Did you try to go on Duty with "ForceDuty"? 

 

Edited May 14, 20214 yr by Bekobi

17 minutes ago, Bekobi said:

Okay good to know. Do you have the latest .NetFramework?

[5/14/2021 11:06:36 AM.272] LSPD First Response: ==============================
[5/14/2021 11:06:36 AM.272] LSPD First Response: UNHANDLED EXCEPTION DURING GAME FIBER TICK
[5/14/2021 11:06:36 AM.272] LSPD First Response: ------------------------------
[5/14/2021 11:06:36 AM.272] LSPD First Response: Origin: Game fiber "LoadingSpinner".
[5/14/2021 11:06:36 AM.272] LSPD First Response: ------------------------------
[5/14/2021 11:06:36 AM.272] LSPD First Response: Exception type: System.FormatException
[5/14/2021 11:06:36 AM.272] LSPD First Response: Exception message: Input string was not in a correct format.
[5/14/2021 11:06:36 AM.272] LSPD First Response: ------------------------------
[5/14/2021 11:06:36 AM.272] LSPD First Response: Inner exceptions:
[5/14/2021 11:06:36 AM.272] LSPD First Response: ------------------------------
[5/14/2021 11:06:36 AM.272] LSPD First Response: Stack trace:
[5/14/2021 11:06:36 AM.272] LSPD First Response: at System.Number.ParseSingle(String value, NumberStyles options, NumberFormatInfo numfmt)
[5/14/2021 11:06:36 AM.272] at System.Single.Parse(String s, IFormatProvider provider)
[5/14/2021 11:06:36 AM.272] at ‌‏‮‪‎‪‫‎‏‏‫‮‪‏‮‬‮‎‭‏‮‎‮.‍‌‍‎‍‮‬‬‍‎‍‮‪‭‏‪‪‪‪‪‭‮()
[5/14/2021 11:06:36 AM.272] at ‭‌‬‌‭‏‌‎‏‬‪‍‪‬‫‌‫‫‏‍‍‪‌‮.‭‏‭‫‮‎‬‍‬‏‎‫‌‫‌‌‬‭‭‭‎‮‎‮‫‪‮(Boolean )
[5/14/2021 11:06:36 AM.272] at LSPD_First_Response.Mod.API.Functions.OnDutyStateChangedEventHandler.Invoke(Boolean onDuty)
[5/14/2021 11:06:36 AM.272] at VYZgyEabNKeCIKItxZUeJxVHRTmz.WOcEqmqamTRSuREgyBShtzSVJPIw(Boolean ) in E:\GTA V\LSPD First Response\LSPD First Response\Mod\PlayerDutyController.cs:line 69
[5/14/2021 11:06:36 AM.272] at VYZgyEabNKeCIKItxZUeJxVHRTmz.JyGAhIXUXbjOrEazIDMgAekMGgur(Boolean , Boolean ) in E:\GTA V\LSPD First Response\LSPD First Response\Mod\PlayerDutyController.cs:line 371
[5/14/2021 11:06:36 AM.272] at ZjbmuBLXxiIbkzqxBMrLjnEDNFOO.xdmYviFXfqpJoeRqDBfioPCMYCJA() in E:\GTA V\LSPD First Response\LSPD First Response\Mod\Menus\DutyMenu.cs:line 235
[5/14/2021 11:06:36 AM.272] at bUeWHSiXMDmhlHLfcIsWVJTDFIFd.DKkWaFEcaeGXTbQKRmxLHOAefPiKA() in E:\GTA V\LSPD First Response\LSPD First Response\Engine\UI\LoadingSpinner.cs:line 42
[5/14/2021 11:06:36 AM.272] at Rage.GameFiber.Main()
[5/14/2021 11:06:36 AM.272] LSPD First Response: ==============================

Did you try to go on Duty with "ForceDuty"? 

 

Regarding going on duty via "forceduty", yes, I do not get any crashes and It shows all plug ins loaded in. I am able to play fine that way however the reason I know something is wrong is I am not able to use stop the ped at all or get it to function. When pulling STP out, I am able to do everything (on duty from station and force duty) without crashes. The.netframework. How do I check? Or should I just go ahead and download the most recent one. Appreciate it.

 

Edit: Went to download and was told I already have 4.8 or later installed on the pc.

Edited May 14, 20214 yr by midnightbos

2 minutes ago, midnightbos said:

Regarding going on duty via "forceduty", yes, I do not get any crashes and It shows all plug ins loaded in. I am able to play fine that way however the reason I know something is wrong is I am not able to use stop the ped at all or get it to function. When pulling STP out, I am able to do everything (on duty from station and force duty) without crashes. The.netframework. How do I check? Or should I just go ahead and download the most recent one. Appreciate it.

Do you have the latest STP? Is got updated to work with LSPDFR 0.49 

1 minute ago, Bekobi said:

Do you have the latest STP? Is got updated to work with LSPDFR 0.49 

I believe I do. I cleared my STP files multiple times and redownloaded from bejoljo's website and was careful to select the most recent one. 

Just now, midnightbos said:

I believe I do. I cleared my STP files multiple times and redownloaded from bejoljo's website and was careful to select the most recent one. 

 

Did you delete the StopThePed folder before you installed the new one? 

 

I would recommend you to install the latest .NetFramework as well

Just now, Bekobi said:

 

Did you delete the StopThePed folder before you installed the new one? 

 

I would recommend you to install the latest .NetFramework as well

Yes all folders and files I could trace relating to STP. Apologies, see edit on one of the last replies, I believe I have the latest. 

Just now, midnightbos said:

Yes all folders and files I could trace relating to STP. Apologies, see edit on one of the last replies, I believe I have the latest. 

I am going to reinstall STP again extra careful once again.

2 minutes ago, midnightbos said:

Yes all folders and files I could trace relating to STP. Apologies, see edit on one of the last replies, I believe I have the latest. 

I am going to reinstall STP again extra careful once again.

If it does not work then do a clean reinstall of lspdfr.

1 minute ago, Bekobi said:

If it does not work then do a clean reinstall of lspdfr.

Okay will do. However since I've already did multiple fresh installs and each time they work fine until the point where I install STP (and work fine once STP is removed) is there no other kind of solutions we could try before a reinstall?

12 minutes ago, midnightbos said:

Okay will do. However since I've already did multiple fresh installs and each time they work fine until the point where I install STP (and work fine once STP is removed) is there no other kind of solutions we could try before a reinstall?

Installed STP again, crashing when going on duty from police department but not when reloading all plug ins or forcing duty thru f4. Starting to really lose hope in STP. Is there a decent alternative to STP that I could use? To my understanding stp seems to be one of the main mods of the game would really love to be able to run it or a similar alternative.

10 hours ago, midnightbos said:

Installed STP again, crashing when going on duty from police department but not when reloading all plug ins or forcing duty thru f4. Starting to really lose hope in STP. Is there a decent alternative to STP that I could use? To my understanding stp seems to be one of the main mods of the game would really love to be able to run it or a similar alternative.

Unforunately I don't know a good alternative.