Jump to content

2019 Charger CHP Pack 1.1

   (52 reviews)

10 Screenshots

Hey there!

 

The newest addition to the CHP fleet, now also available for GTA V. 

 

Features:

Accurate Lighting
Accurate Equipment
The front and rear of the lightbar can be controlled independently

Animated  antenna

Reflective Decals

And a whole bunch of small details most of you will never notice

 

That should be it.

 

Have fun!

 

These cars require an unedited carvariation.meta to work properly!!!

If you do not have it, the yelp pattern will be messed up.


What's New in Version 1.1

Released

- fixed dirt mapping

Base Model:

- Original vehicle model is 2015 Dodge Charger from Forza, edited into the 2018 Dodge Charger Pursuit by Matt with parts from FH3 and Gamemodels
- Seats, center mirror, shifter and dash edits modeled and done by Kane104 - commissioned by Ranger Rick
- Major help from EVI for digital dial information and help to get the dials working and his patience to help me
- Rear bumper diffuser modeled by Patrol 31 Normal edits by Steinberg
- AWD/Charger badge modeled by iansonwheels Converted to V by Matt
- AWD Steelies/Hubcap modeled by iansonwheels Converted to V by Matt
- Big thanks to Cj24 for beta testing the model and help with spec maps and normal maps and his overall knowledge of gta materials
- Interior dial textures made by NeonLazer
- Interior button textures made by Slendis
- Rims from Gamemodels.ru Centercap edited by Matt
- Dome Light modeled by Matt
- A big thanks to Cj24, Kane104, EVI, Patrol 31, Steinberg , Desmond , NeOnLaZeR, Izick, Rekram, HDgamerzPC, and a big thanks to Ranger Rick who bought 3D parts so that i wouldn't give up on this project and bought me a Zmodeler license so that i can keep working on this project Thank you Rick.
- Thank you to everyone who supported me and the project...
- Another big thanks to iansonwheels who had the time to make the AWD steelies and AWD package stuff....


Equipment:

Guns made by an unknown person
Whelen Liberty made by EVI edited by Sgt.Kanyo
Multiple parts and textures from GTA 4 and 5 made by Rockstar Games
Whelen Avenger scratch made and texuterd by 0taku
Special thanks to AngeloCosma and c0ff33man
Iforce, Dashcam, Antennas, Pushbar, Gun Rack, Skins, and a few other parts made by Sentinel55

Optimized for

  • Emergency Lighting System

    Emergency Lighting System V brings one of the most popular modifications ever created for a GTA title (ELS-IV) to Grand Theft Auto V. ELS-V will add a whole new dimension to  your patrols. With a fresh look and many more features than its predecessor, it's also sure to brighten up your game and satisfy the emergency lighting enthusiast in anyone.   DESCRIPTION − ELS provides an alternate and incredibly in-depth way of controlling emergency vehicle lights and sounds. − ELS requires
    Lt.Caine

    By Lt.Caine

    Updated

    • 4.5m
  • You may also like

  • 2017 California Highway Patrol Mega Pack - ELS

    Welcome to something that has been in the making since I've gotten my hands on ELS, something that has taken more hours then you guys could understand. I've pulled out all the stops for this pack. I've taken all your guys' feedback on my screenshots, and I've done my best to destroy it in the realistic/quality/immersion department. I've done my best to simplify the installation of this file. For those of you who are looking for an add-on version of this pack, you're going to have to wait a littl
    Thehurk

    By Thehurk

    Updated

    • 886k
  • 2011 Ford Crown Victoria CHP Pack

    Hey there! This is by far the most accurate pack I've ever made and here it is!   The amount of time that went into this project is absolutely insane. But I think it was worth it! The CHP is my favorite department, so I'ts pretty understandable why I had to do this.   Special thanks to @AngeloCosma without him, this pack wouldn't be as accurate as it is! And thanks a lot to @c0ff33man for his amazing videos and beautiful screenshots!   Features: Forza
    Sentinel55

    By Sentinel55

    Updated

    • 16.8k
  • [ELS] SAHP Code 3 Pack

    If you want to talk or whatever join this discord https://discord.gg/aeQPR5z   You need to install the META files for the LODS to function properly   If you use this in a video please credit it properly    Known Issues:    -Lights dont move with trunk. I cant fix this as its ELS and I only have so many different siren slots   Disclaimer: DO NOT distribute this content without my permission! This includes liveries, models or the screenshots
    Ripple

    By Ripple

    Updated

    • 140.2k
  • Emergency uniforms pack - Law & Order

    https://www.patreon.com/alex_ashfold
    Alex_Ashfold

    By Alex_Ashfold

    Updated

    • 4.1m
  • [ELS] LSPD Legacy Pack

    FINALLY UPDATE YES    If you want to talk or whatever join this discord https://discord.gg/aeQPR5z   THE NON ELS VERSION OF THIS PACK IS AVAILABLE ON MY DISCORD   If you use this in a video please credit it properly    -Any cars that flip easily either put it in a different slot or wait for the addon dlc update On the 2020 FPIU you need to flip your text on the hood if you change the skin   Disclaimer
    Ripple

    By Ripple

    Updated

    • 273.7k
  • Prowler Radar

    A realistic police radar.
    opus49

    By opus49

    Updated

    • 250.3k
  • User Feedback

    Recommended Comments



    Any way to remove the "Highway Patrol" on the trunk for the Polar bears since the Highway Patrol removed the logo from the back since they are no longer CVE "Commercial Vehicle Enforcement" vehicles they are now PCF "Primary Collision Factor" vehicles. If its possible that'd be great if not then its fine thank you sir!

    Link to comment
    Share on other sites

    I am a Peace Officer here in the State of California. I’m not an Officer with the CHP, but they were my number one choice. Life happened and I ended up getting on with another department in Northern California. Your CHP vehicles and light patterns are 100% accurate. Very good job on them. I know in a comment you said you weren’t a fan of the explorers. You also said you’d think about doing a Tahoe. If you can do a Tahoe or an Explorer (black and white or the PCF Polar bear) my level of respect and gratitude would go so much higher for you. You get the small details, light the blue/amber lighting in the trunk, the black microphone by the driver’s visor, the details of the MDT/bottom center console, and the “stage one” back and forth amber/blue pattern.  If not I understand, I just want you to know you did a great job on these. I have many family members in the CHP, I’ve been around the vehicles enough to know these are the best out there on LSPDFR. 

    Edited by Jcorrales13
    Link to comment
    Share on other sites

    On 3/22/2020 at 7:42 AM, OfficerJonathon said:

    Any way to remove the "Highway Patrol" on the trunk for the Polar bears since the Highway Patrol removed the logo from the back since they are no longer CVE "Commercial Vehicle Enforcement" vehicles they are now PCF "Primary Collision Factor" vehicles. If its possible that'd be great if not then its fine thank you sir!

     

    You could remove it on the "chp_decal" texture. But that will also remove it on the black and white slicktops.

     

    15 hours ago, Jcorrales13 said:

    I am a Peace Officer here in the State of California. I’m not an Officer with the CHP, but they were my number one choice. Life happened and I ended up getting on with another department in Northern California. Your CHP vehicles and light patterns are 100% accurate. Very good job on them. I know in a comment you said you weren’t a fan of the explorers. You also said you’d think about doing a Tahoe. If you can do a Tahoe or an Explorer (black and white or the PCF Polar bear) my level of respect and gratitude would go so much higher for you. You get the small details, light the blue/amber lighting in the trunk, the black microphone by the driver’s visor, the details of the MDT/bottom center console, and the “stage one” back and forth amber/blue pattern.  If not I understand, I just want you to know you did a great job on these. I have many family members in the CHP, I’ve been around the vehicles enough to know these are the best out there on LSPDFR. 

     

    I don't know if I'm done with the CHP stuff yet. A CHP FPIU pack is requested countless times, maybe I should just think about it again.

    Anyway, thanks a lot man! It really helps to keep the motivation high. Stay safe out there!

    Link to comment
    Share on other sites

    I just recently got back into LSPDFR with the purchase of a new PC. Is there anyway with getting the slick top PCF White Charger to have two textures? 
     

    I’d like it to have both the black and white texture for me to chose from. I thought I knew how to do it but I was way off. I thought you just had to import the black and white texture with the same name as the white texture. 

    Link to comment
    Share on other sites

    7 hours ago, Jcorrales13 said:

    I just recently got back into LSPDFR with the purchase of a new PC. Is there anyway with getting the slick top PCF White Charger to have two textures? 
     

    I’d like it to have both the black and white texture for me to chose from. I thought I knew how to do it but I was way off. I thought you just had to import the black and white texture with the same name as the white texture. 

    you cant switch it to fbi or police4 keep it sheriff slot you will be fine

    Link to comment
    Share on other sites

    Just a question is there anyway i can get the red spotlight to flash if i put it in one of the hurks chp mega pack charger slot, P.S Great pack your CVPI and Charger oack are one of the best CHP packs i have ever seen.

    Link to comment
    Share on other sites

    16 hours ago, Zachjohnson2 said:

    Hey man I know it’s the normal but is there a way to make the steady burn when I get out of the car off?

     

    Just change this line:

     

    <OutOfVeh Enabled="true"

     

    You'll find it three times in a VCF file, just set it to false.

    Link to comment
    Share on other sites

    Is it possible for me to try and make an unmarked livery for the slicktop (plain white skin, then use a trainer to change the color of the car) for personal use?

     

    I am aware of the fact that it may not look at all realistic with the spotlights and push bar
    (If needed, I will may provide a link to the sources I know that have at least a recording of an unmarked unit in action) 

    Edited by DittoNeato
    Link to comment
    Share on other sites

    4 hours ago, DittoNeato said:

    Is it possible for me to try and make an unmarked livery for the slicktop (plain white skin, then use a trainer to change the color of the car) for personal use?

     

    I am aware of the fact that it may not look at all realistic with the spotlights and push bar
    (If needed, I will may provide a link to the sources I know that have at least a recording of an unmarked unit in action) 

     

    Feel free to. Don't forget to replace the reflective texture with a transparent texture.

    Link to comment
    Share on other sites

    11 hours ago, Sentinel55 said:

     

    Feel free to. Don't forget to replace the reflective texture with a transparent texture.

    Are the reflective textures the livery sign or the highway patrol decals, or both?

    Link to comment
    Share on other sites

    3 minutes ago, DittoNeato said:

    Are the reflective textures the livery sign or the highway patrol decals, or both?

     

     

    The texture with the reflective parts is chp_decal.png

    Link to comment
    Share on other sites

    5 hours ago, Sentinel55 said:

    The texture with the reflective parts is chp_decal.png

    Ah perfect, even though now with the reflective part is transparent, I have the "panda" thing left to deal with. Thank you kindly!

    Link to comment
    Share on other sites

    Hello, someone else asked how to remove the "HIGHWAY PATROL" from the white polar and you said "You could remove it on the "chp_decal" texture. But that will also remove it on the black and white slicktops." Can you help me understand how to remove it from the actual chp_decal_? Im able to find it but im not seeing how to remove it.

    Link to comment
    Share on other sites

    1 minute ago, flackolc said:

    Hello, someone else asked how to remove the "HIGHWAY PATROL" from the white polar and you said "You could remove it on the "chp_decal" texture. But that will also remove it on the black and white slicktops." Can you help me understand how to remove it from the actual chp_decal_? Im able to find it but im not seeing how to remove it.

     

    You have to export the png and edit it with a photo editing software. Photoshop or paint.net or something. Then import it back into OpenIV

    Link to comment
    Share on other sites

    1 minute ago, Sentinel55 said:

     

    You have to export the png and edit it with a photo editing software. Photoshop or paint.net or something. Then import it back into OpenIV

    Ahhhhhh ok ok..thank you. I'll give that a shot rn. Once opened in one of those softwares I can simply delete the "HIGHWAY PATROL" or would I have to like paint it white or something??

    Link to comment
    Share on other sites

    5 minutes ago, flackolc said:

    Ahhhhhh ok ok..thank you. I'll give that a shot rn. Once opened in one of those softwares I can simply delete the "HIGHWAY PATROL" or would I have to like paint it white or something??

     

    The chp_decal.png is a partly transparent texture, you just have to delete the text you want to get rid of and you're done

    Link to comment
    Share on other sites


    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    ×
    ×
    • Create New...